XTAE:MSVT'
s Quick Ratio Range Over the Past 10 Years
Min: 0.82 Med: 2.67 Max: 8.84
Current: 1.04
During the past 6 years, Massivit 3D Printing Technologies's highest Quick Ratio was 8.84. The lowest was 0.82. And the median was 2.67.
XTAE:MSVT's Quick Ratio is ranked worse than 69.35% of 2493
companies
in the Hardware industry
Industry Median: 1.46
vs XTAE:MSVT: 1.04
Massivit 3D Printing Technologies (XTAE:MSVT) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Massivit 3D Printing Technologies Quick Ratio Related Terms
Massivit 3D Printing Technologies Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Massivit 3D Printing Technologies Quick Ratio Chart
XTAE:MSVT vs SNDK, DELL, STX: Quick Ratio Comparison
For the Computer Hardware subindustry, Massivit 3D Printing Technologies's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Massivit 3D Printing Technologies Quick Ratio vs Hardware Industry
For the Hardware industry and Technology sector, Massivit 3D Printing Technologies's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Massivit 3D Printing Technologies's Quick Ratio falls into.
Massivit 3D Printing Technologies Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Massivit 3D Printing Technologies (XTAE:MSVT) has a Quick Ratio of 1.04 as of Dec. 2025. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Massivit 3D Printing Technologies and its competitors. This is 61% below median its historical median of 2.67. Over the past decade, Massivit 3D Printing Technologies' Quick Ratio has ranged from 0.82 to 8.84. According to the industry distribution chart, Massivit 3D Printing Technologies ranks #1729 out of 2493 companies in the Hardware industry, placing it in the top 69.4%.
Is Massivit 3D Printing Technologies' Quick Ratio too high?
Massivit 3D Printing Technologies' current Quick Ratio of 1.04 is 61% below median its 10-year median of 2.67. Over the past 10 years, this metric has ranged from a low of 0.82 to a high of 8.84. The Hardware industry median Quick Ratio is 1.46. Massivit 3D Printing Technologies' value of 1.04 is 28.8% below this industry median. Based on the distribution chart, Massivit 3D Printing Technologies ranks #1729 out of 2493 companies in the Hardware industry, which is below the industry midpoint. Overall, Massivit 3D Printing Technologies has a GF Score™ of 61/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Massivit 3D Printing Technologies' Quick Ratio compare to SNDK and DELL?
According to the Hardware industry distribution chart, Massivit 3D Printing Technologies ranks #1729 out of 2493 companies for Quick Ratio. This places Massivit 3D Printing Technologies in the lower half of its industry. The industry median Quick Ratio is 1.46. Massivit 3D Printing Technologies' value of 1.04 is 28.8% below this benchmark. Historically, Massivit 3D Printing Technologies' own Quick Ratio has ranged from 0.82 to 8.84 over the past decade. While the company's 10-year median is 2.67 vs. the industry median of 1.46, Massivit 3D Printing Technologies has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Hardware company?
The median Quick Ratio among Hardware companies is 1.46, based on 2,493 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Massivit 3D Printing Technologies's current Quick Ratio of 1.04 is 28.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Massivit 3D Printing Technologies and its competitors. For the Hardware industry, the median Quick Ratio is 1.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Massivit 3D Printing Technologies's current Quick Ratio is 1.04, which is 61% below median its own 10-year median of 2.67. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Massivit 3D Printing Technologies stock overvalued right now?
Based on GuruFocus' analysis, Massivit 3D Printing Technologies (XTAE:MSVT) is currently considered Modestly Undervalued. The stock's GF Value™ is ₪1.07, compared to a current price of ₪0.93 — trading 12.7% below its estimated fair value. The current Quick Ratio is 1.04, which is 61% below median its 10-year median of 2.67 and 28.8% below the Hardware industry median of 1.46. Massivit 3D Printing Technologies' overall GF Score™ is 61/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Massivit 3D Printing Technologies (XTAE:MSVT), the current Quick Ratio is 1.04 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Massivit 3D Printing Technologies (XTAE:MSVT) Overvalued in 2026?
Based on GuruFocus' analysis, Massivit 3D Printing Technologies stock appears to be undervalued.
The current stock price of ₪0.93 is trading 12.7% below its estimated GF Value™ of ₪1.07.
GuruFocus considers Massivit 3D Printing Technologies to be Modestly Undervalued.
Key valuation signals for XTAE:MSVT:
Quick Ratio: 1.04 (61% below median its 10-year median of 2.67)
GF Value™: ₪1.07 vs. price of ₪0.93 (12.7% below fair value)
Industry Position: 28.8% below the Hardware median (#1729 of 2493)
No single metric tells the full story. See the XTAE:MSVT stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Massivit 3D Printing Technologies Business Description
Massivit 3D Printing Technologies Ltd is engaged in providing 3D printing solutions for the Engineering, Visual Communications, Entertainment, Academia, Interior Design, and Architectural markets.
61GF Score
Get the complete analysis for XTAE:MSVT
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XTAE:MSVT has been successfully added to your 
