Shivalik Bimetal ControlsNSE:SBCL -3.86%96 Dividend Payout Ratio is 0.44 as of Mar. 2026, which is 389% above its 10-year median of 0.09. GuruFocus rates NSE:SBCL with a GF Score™ of 96/100 and a GF Value™ of ₹627.06 (Modestly Overvalued). The stock has 6 warning signs investors should review. Among 1,719 Industrial Products companies, Shivalik Bimetal Controls ranks better than 76.21% on this metric.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Shivalik Bimetal Controls's Dividend Payout Ratio for the
months ended in Mar. 2026 was 0.44.
The historical rank and industry rank for Shivalik Bimetal Controls's Dividend Payout Ratio or its related term are showing as below:
NSE:SBCL'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.05 Med: 0.09 Max: 0.21
Current: 0.21
During the past 13 years, the highest Dividend Payout Ratio of Shivalik Bimetal Controls was 0.21. The lowest was 0.05. And the median was 0.09.
NSE:SBCL's Dividend Payout Ratio is ranked better than 76.21% of 1719
companies
in the Industrial Products industry
Industry Median: 0.37
vs NSE:SBCL: 0.21
During the past 13 years, the highest Trailing Annual Dividend Yield of Shivalik Bimetal Controls was 2.82%. The lowest was 0.11%. And the median was 0.30%.
During the past 12 months, Shivalik Bimetal Controls's average Dividends Per Share Growth Rate was 59.10% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 61.40% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 72.50% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Shivalik Bimetal Controls was 91.30% per year. The lowest was -10.90% per year. And the median was 44.05% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Shivalik Bimetal Controls (NSE:SBCL) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Shivalik Bimetal Controls Dividend Payout Ratio Related Terms
Shivalik Bimetal Controls Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shivalik Bimetal Controls Dividend Payout Ratio Chart
NSE:SBCL vs CRS, ATI, MLI: Dividend Payout Ratio Comparison
For the Metal Fabrication subindustry, Shivalik Bimetal Controls's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shivalik Bimetal Controls Dividend Payout Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shivalik Bimetal Controls's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Shivalik Bimetal Controls's Dividend Payout Ratio falls into.
Shivalik Bimetal Controls Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Shivalik Bimetal Controls's Dividend Payout Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shivalik Bimetal Controls (NSE:SBCL) has a Dividend Payout Ratio of 0.44 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Shivalik Bimetal Controls and its competitors. This is 389% above median its historical median of 0.09. Over the past decade, Shivalik Bimetal Controls' Dividend Payout Ratio has ranged from 0.05 to 0.21. According to the industry distribution chart, Shivalik Bimetal Controls ranks #409 out of 1719 companies in the Industrial Products industry, placing it in the top 23.8%.
Is Shivalik Bimetal Controls' Dividend Payout Ratio too high?
Shivalik Bimetal Controls' current Dividend Payout Ratio of 0.44 is 389% above median its 10-year median of 0.09. Over the past 10 years, this metric has ranged from a low of 0.05 to a high of 0.21. The Industrial Products industry median Dividend Payout Ratio is 0.37. Shivalik Bimetal Controls' value of 0.44 is 18.9% above this industry median. Based on the distribution chart, Shivalik Bimetal Controls ranks #409 out of 1719 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Shivalik Bimetal Controls has a GF Score™ of 96/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Shivalik Bimetal Controls' Dividend Payout Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Shivalik Bimetal Controls ranks #409 out of 1719 companies for Dividend Payout Ratio. This places Shivalik Bimetal Controls in the top 24% of its industry — outperforming the majority of peers. The industry median Dividend Payout Ratio is 0.37. Shivalik Bimetal Controls' value of 0.44 is 18.9% above this benchmark. Historically, Shivalik Bimetal Controls' own Dividend Payout Ratio has ranged from 0.05 to 0.21 over the past decade. While the company's 10-year median is 0.09 vs. the industry median of 0.37, Shivalik Bimetal Controls has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,719 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shivalik Bimetal Controls's current Dividend Payout Ratio of 0.44 is 18.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Shivalik Bimetal Controls and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shivalik Bimetal Controls's current Dividend Payout Ratio is 0.44, which is 389% above median its own 10-year median of 0.09. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shivalik Bimetal Controls stock overvalued right now?
Based on GuruFocus' analysis, Shivalik Bimetal Controls (NSE:SBCL) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹627.06, compared to a current price of ₹695.80 — trading 11% above its estimated fair value. The current Dividend Payout Ratio is 0.44, which is 389% above median its 10-year median of 0.09 and 18.9% above the Industrial Products industry median of 0.37. Shivalik Bimetal Controls' overall GF Score™ is 96/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Shivalik Bimetal Controls (NSE:SBCL), the current Dividend Payout Ratio is 0.44 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shivalik Bimetal Controls (NSE:SBCL) Overvalued in 2026?
Based on GuruFocus' analysis, Shivalik Bimetal Controls stock appears to be overvalued.
The current stock price of ₹695.80 is trading 11% above its estimated GF Value™ of ₹627.06.
GuruFocus considers Shivalik Bimetal Controls to be Modestly Overvalued.
Key valuation signals for NSE:SBCL:
Dividend Payout Ratio: 0.44 (389% above median its 10-year median of 0.09)
GF Value™: ₹627.06 vs. price of ₹695.80 (11% above fair value)
Industry Position: 18.9% above the Industrial Products median (#409 of 1719)
No single metric tells the full story. See the NSE:SBCL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shivalik Bimetal Controls Ltd is an integrated manufacturer and seller of thermostatic bimetal/tri-metal strips, components, EB-welded products, cold-bonded bimetal strips, and parts. It operates in a single segment, Process and Product Engineering. It specializes in the joining of materials through various methods such as diffusion bonding/cladding, electron beam welding, and others. The company caters to various industry applications, which include Electronics, Automotive, Domestic Appliances, Industrial, Medical, Defence and Agriculture, and Animal Husbandry Appliances. Geographically, the firm generates maximum revenue from its business in India, and the rest from America, Europe, and other regions.
96GF Score
Get the complete analysis for NSE:SBCL
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SBCL has been successfully added to your 
