Shivalik Bimetal ControlsNSE:SBCL +2.80%96 PEG Ratio is 1.85 as of Jul. 12, 2026, which is 76% above its 10-year median of 1.05. GuruFocus rates NSE:SBCL with a GF Score™ of 96/100 and a GF Value™ of ₹627.40 (Modestly Overvalued). The stock has 6 warning signs investors should review. Among 1,276 Industrial Products companies, Shivalik Bimetal Controls ranks worse than 50.55% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Shivalik Bimetal Controls's PEG Ratio or its related term are showing as below:
NSE:SBCL'
s PEG Ratio Range Over the Past 10 Years
Min: 0.64 Med: 1.05 Max: 10.56
Current: 1.85
During the past 13 years, Shivalik Bimetal Controls's highest PEG Ratio was 10.56. The lowest was 0.64. And the median was 1.05.
NSE:SBCL's PEG Ratio is ranked worse than 50.55% of 1276
companies
in the Industrial Products industry
Industry Median: 1.825
vs NSE:SBCL: 1.85
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Shivalik Bimetal Controls (NSE:SBCL) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Shivalik Bimetal Controls PEG Ratio Related Terms
Shivalik Bimetal Controls PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, Shivalik Bimetal Controls's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shivalik Bimetal Controls PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shivalik Bimetal Controls's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Shivalik Bimetal Controls's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Shivalik Bimetal Controls (NSE:SBCL) has a PEG Ratio of 1.85 as of Jul. 12, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shivalik Bimetal Controls and its competitors. This is 76% above median its historical median of 1.05. Over the past decade, Shivalik Bimetal Controls' PEG Ratio has ranged from 0.64 to 10.56. According to the industry distribution chart, Shivalik Bimetal Controls ranks #645 out of 1276 companies in the Industrial Products industry, placing it in the top 50.5%.
Is Shivalik Bimetal Controls' PEG Ratio too high?
Shivalik Bimetal Controls' current PEG Ratio of 1.85 is 76% above median its 10-year median of 1.05. Over the past 10 years, this metric has ranged from a low of 0.64 to a high of 10.56. The Industrial Products industry median PEG Ratio is 1.83. Shivalik Bimetal Controls' value of 1.85 is 1.4% above this industry median. Based on the distribution chart, Shivalik Bimetal Controls ranks #645 out of 1276 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Shivalik Bimetal Controls has a GF Score™ of 96/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Shivalik Bimetal Controls' PEG Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Shivalik Bimetal Controls ranks #645 out of 1276 companies for PEG Ratio. This places Shivalik Bimetal Controls in the lower half of its industry. The industry median PEG Ratio is 1.83. Shivalik Bimetal Controls' value of 1.85 is 1.4% above this benchmark. Historically, Shivalik Bimetal Controls' own PEG Ratio has ranged from 0.64 to 10.56 over the past decade. While the company's 10-year median is 1.05 vs. the industry median of 1.83, Shivalik Bimetal Controls has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.83, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shivalik Bimetal Controls's current PEG Ratio of 1.85 is 1.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shivalik Bimetal Controls and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.83 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shivalik Bimetal Controls's current PEG Ratio is 1.85, which is 76% above median its own 10-year median of 1.05. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shivalik Bimetal Controls stock overvalued right now?
Based on GuruFocus' analysis, Shivalik Bimetal Controls (NSE:SBCL) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹627.40, compared to a current price of ₹747.05 — trading 19.1% above its estimated fair value. The current PEG Ratio is 1.85, which is 76% above median its 10-year median of 1.05 and 1.4% above the Industrial Products industry median of 1.83. Shivalik Bimetal Controls' overall GF Score™ is 96/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Shivalik Bimetal Controls (NSE:SBCL), the current PEG Ratio is 1.85 as of Jul. 12, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shivalik Bimetal Controls (NSE:SBCL) Overvalued in 2026?
Based on GuruFocus' analysis, Shivalik Bimetal Controls stock appears to be overvalued.
The current stock price of ₹747.05 is trading 19.1% above its estimated GF Value™ of ₹627.40.
GuruFocus considers Shivalik Bimetal Controls to be Modestly Overvalued.
Key valuation signals for NSE:SBCL:
PEG Ratio: 1.85 (76% above median its 10-year median of 1.05)
GF Value™: ₹627.40 vs. price of ₹747.05 (19.1% above fair value)
Industry Position: 1.4% above the Industrial Products median (#645 of 1276)
No single metric tells the full story. See the NSE:SBCL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shivalik Bimetal Controls Ltd is an integrated manufacturer and seller of thermostatic bimetal/tri-metal strips, components, EB-welded products, cold-bonded bimetal strips, and parts. It operates in a single segment, Process and Product Engineering. It specializes in the joining of materials through various methods such as diffusion bonding/cladding, electron beam welding, and others. The company caters to various industry applications, which include Electronics, Automotive, Domestic Appliances, Industrial, Medical, Defence and Agriculture, and Animal Husbandry Appliances. Geographically, the firm generates maximum revenue from its business in India, and the rest from America, Europe, and other regions.
96GF Score
Get the complete analysis for NSE:SBCL
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SBCL has been successfully added to your 
