AIT (Applied Industrial Technologies) Dividend Payout Ratio : 0.18 (As of Mar. 2025)

View and export this data going back to 1972. Start your Free Trial

What is Applied Industrial Technologies Dividend Payout Ratio?

The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Applied Industrial Technologies's Dividend Payout Ratio for the months ended in Mar. 2025 was 0.18.

The historical rank and industry rank for Applied Industrial Technologies's Dividend Payout Ratio or its related term are showing as below:

AIT' s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.15 Med: 0.3 Max: 0.63
Current: 0.16

During the past 13 years, the highest Dividend Payout Ratio of Applied Industrial Technologies was 0.63. The lowest was 0.15. And the median was 0.30.

AIT's Dividend Payout Ratio is ranked better than
90.48% of 84 companies
in the Industrial Distribution industry
Industry Median: 0.405 vs AIT: 0.16

As of today (2025-07-12), the Dividend Yield % of Applied Industrial Technologies is 0.65%.

During the past 13 years, the highest Trailing Annual Dividend Yield of Applied Industrial Technologies was 3.52%. The lowest was 0.53%. And the median was 1.63%.

Applied Industrial Technologies's Dividends per Share for the months ended in Mar. 2025 was $0.46.

During the past 12 months, Applied Industrial Technologies's average Dividends Per Share Growth Rate was 10.60% per year. During the past 3 years, the average Dividends Per Share Growth Rate was 3.50% per year. During the past 5 years, the average Dividends Per Share Growth Rate was 3.30% per year. During the past 10 years, the average Dividends Per Share Growth Rate was 3.80% per year.

During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Applied Industrial Technologies was 31.10% per year. The lowest was 1.00% per year. And the median was 8.00% per year.

The growth rate is calculated with least square regression.

For more information regarding to dividend, please check our Dividend Page.

* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.

Applied Industrial Technologies Dividend Payout Ratio Historical Data

The historical data trend for Applied Industrial Technologies's Dividend Payout Ratio can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

* Premium members only.

Applied Industrial Technologies Dividend Payout Ratio Chart

Applied Industrial Technologies Annual Data

Trend

Jun15

Jun16

Jun17

Jun18

Jun19

Jun20

Jun21

Jun22

Jun23

Jun24

Dividend Payout Ratio

Get a 7-Day Free Trial

0.33

0.27

0.20

0.16

0.15

Applied Industrial Technologies Quarterly Data
	Jun20	Sep20	Dec20	Mar21	Jun21	Sep21	Dec21	Mar22	Jun22	Sep22	Dec22	Mar23	Jun23	Sep23	Dec23	Mar24	Jun24	Sep24	Dec24	Mar25
Dividend Payout Ratio	Get a 7-Day Free Trial															0.15	0.14	0.16	0.16	0.18

Competitive Comparison of Applied Industrial Technologies's Dividend Payout Ratio

For the Industrial Distribution subindustry, Applied Industrial Technologies's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Applied Industrial Technologies's Dividend Payout Ratio Distribution in the Industrial Distribution Industry

For the Industrial Distribution industry and Industrials sector, Applied Industrial Technologies's Dividend Payout Ratio distribution charts can be found below:

* The bar in red indicates where Applied Industrial Technologies's Dividend Payout Ratio falls into.

Save Embed

;

Save Embed

;

Applied Industrial Technologies Dividend Payout Ratio Calculation

Applied Industrial Technologies's Dividend Payout Ratio for the fiscal year that ended in Jun. 2024 is calculated as

Dividend Payout Ratio	=	Dividends per Share (A: Jun. 2024 )	/	EPS without NRI (A: Jun. 2024 )
	=	1.44	/	9.75
	=	0.15

Applied Industrial Technologies's Dividend Payout Ratio for the quarter that ended in Mar. 2025 is calculated as

Dividend Payout Ratio	=	Dividends per Share (Q: Mar. 2025 )	/	EPS without NRI (Q: Mar. 2025 )
	=	0.46	/	2.595
	=	0.18

Applied Industrial Technologies (NYSE:AIT) Dividend Payout Ratio Explanation

In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.

Applied Industrial Technologies Dividend Payout Ratio Related Terms

Thank you for viewing the detailed overview of Applied Industrial Technologies's Dividend Payout Ratio provided by GuruFocus.com. Please click on the following links to see related term pages.

Applied Industrial Technologies Business Description

Industry

GURUFOCUS.COM » STOCK LIST » Industrials » Industrial Distribution » Applied Industrial Technologies Inc (NYSE:AIT) » Definitions » Dividend Payout Ratio

Comparable Companies

Traded in Other Exchanges

0HGR:UK AT4:Germany AT4:Germany

Address

1 Applied Plaza, Cleveland, OH, USA, 44115

Website

https://www.applied.com

Applied Industrial Technologies Inc is a distributor of industrial products to the maintenance, repair, and operations market and the original equipment manufacturing industry. Further, the company provides engineering and design services for industrial and fluid power applications. The products include bearings, power transmission components, fluid power components and systems, industrial rubber products, linear motion components, safety products, oilfield supplies, and other industrial and maintenance supplies. The company's reportable segments are; Service Center Based Distribution which derives key revenue, and Engineered Solutions. Geographically, the company derives its key revenue from the United States and the rest from Canada and other countries.

Executives

Jason W Vasquez	officer: VP-Sales & Marketing-USSC	ONE APPLIED PLAZA, CLEVELAND OH 44115
Neil A Schrimsher	director, officer: President and CEO	ONE APPLIED PLAZA, CLEVELAND OH 44115
Mary Dean Hall	director	4920 O'HEAR AVENUE, SUITE 400, NORTH CHARLESTON SC 29405
Hoffner Warren E Iii	officer: VP-General Mgr, Fluid Power	ONE APPLIED PLAZA, CLEVELAND OH 44115
Kurt W. Loring	officer: VP-Chief HR Officer	ONE APPLIED PLAZA, CLEVELAND OH 44115
Peter C Wallace	director	C/O ROBBINS & MYERS, INC., 51 PLUM STREET, SUITE 260, DAYTON OH 45440
Jon S Ploetz	officer: VP-General Counsel & Secretary	ONE APPLIED PLAZA, CLEVELAND OH 44115
Fred D Bauer	officer: VP-General Counsel & Secretary	ONE APPLIED PLZ, CLEVELAND OH 44115-5056
Vincent K Petrella	director
Shelly Marie Chadwick	director	6070 PARKLAND BLVD, MAYFIELD HTS. OH 44124
Christopher Macey	other: Corporate Controller	5995 MAYFAIR ROAD, NORTH CANTON OH 44720
Peter A Dorsman	director
Jerry Sue Thornton	director	C/O BARNES & NOBLE EDUCATION, INC., 120 MOUNTAIN VIEW BLVD, BASKING RIDGE NJ 07920
Madhuri A Andrews	director	2525 STEMMONS FRWY, DALLAS TX 75207
Green Edith Kelly	director	3131 DEMOCRAT ROAD BLDG B206, MEMPHIS TN 38118