Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Mutual-Tek Industries CoROCO:6407 -2.09%66 Dividend Payout Ratio is 0.81 as of Dec. 2025, which is 8% above its 10-year median of 0.75. GuruFocus rates ROCO:6407 with a GF Score™ of 66/100 and a GF Value™ of NT$23.19 (Modestly Overvalued). The stock has 2 warning signs investors should review. Among 1,214 Hardware companies, Mutual-Tek Industries Co ranks worse than 65.49% on this metric.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Mutual-Tek Industries Co's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.81.
The historical rank and industry rank for Mutual-Tek Industries Co's Dividend Payout Ratio or its related term are showing as below:
ROCO:6407'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.23 Med: 0.75 Max: 4.14
Current: 0.66
During the past 13 years, the highest Dividend Payout Ratio of Mutual-Tek Industries Co was 4.14. The lowest was 0.23. And the median was 0.75.
ROCO:6407's Dividend Payout Ratio is ranked worse than 65.49% of 1214
companies
in the Hardware industry
Industry Median: 0.47
vs ROCO:6407: 0.66
During the past 13 years, the highest Trailing Annual Dividend Yield of Mutual-Tek Industries Co was 12.00%. The lowest was 2.18%. And the median was 5.88%.
During the past 3 years, the average Dividends Per Share Growth Rate was -5.90% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Mutual-Tek Industries Co was 6.20% per year. The lowest was -5.90% per year. And the median was -0.10% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Mutual-Tek Industries Co (ROCO:6407) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Mutual-Tek Industries Co Dividend Payout Ratio Related Terms
Mutual-Tek Industries Co Dividend Payout Ratio Historical Data
* Premium members only.
The historical data trend for Mutual-Tek Industries Co's Dividend Payout Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Mutual-Tek Industries Co Dividend Payout Ratio Chart
ROCO:6407 vs APH, GLW: Dividend Payout Ratio Comparison
For the Electronic Components subindustry, Mutual-Tek Industries Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mutual-Tek Industries Co Dividend Payout Ratio vs Hardware Industry
For the Hardware industry and Technology sector, Mutual-Tek Industries Co's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Mutual-Tek Industries Co's Dividend Payout Ratio falls into.
Mutual-Tek Industries Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Mutual-Tek Industries Co's Dividend Payout Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Mutual-Tek Industries Co (ROCO:6407) has a Dividend Payout Ratio of 0.81 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Mutual-Tek Industries Co and its competitors. This is near median its historical median of 0.75. Over the past decade, Mutual-Tek Industries Co's Dividend Payout Ratio has ranged from 0.23 to 4.14. According to the industry distribution chart, Mutual-Tek Industries Co ranks #795 out of 1214 companies in the Hardware industry, placing it in the top 65.5%.
Is Mutual-Tek Industries Co's Dividend Payout Ratio too high?
Mutual-Tek Industries Co's current Dividend Payout Ratio of 0.81 is near median its 10-year median of 0.75. Over the past 10 years, this metric has ranged from a low of 0.23 to a high of 4.14. The Hardware industry median Dividend Payout Ratio is 0.47. Mutual-Tek Industries Co's value of 0.81 is 72.3% above this industry median. Based on the distribution chart, Mutual-Tek Industries Co ranks #795 out of 1214 companies in the Hardware industry, which is below the industry midpoint. Overall, Mutual-Tek Industries Co has a GF Score™ of 66/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Mutual-Tek Industries Co's Dividend Payout Ratio compare to APH and GLW?
According to the Hardware industry distribution chart, Mutual-Tek Industries Co ranks #795 out of 1214 companies for Dividend Payout Ratio. This places Mutual-Tek Industries Co in the lower half of its industry. The industry median Dividend Payout Ratio is 0.47. Mutual-Tek Industries Co's value of 0.81 is 72.3% above this benchmark. Historically, Mutual-Tek Industries Co's own Dividend Payout Ratio has ranged from 0.23 to 4.14 over the past decade. While the company's 10-year median is 0.75 vs. the industry median of 0.47, Mutual-Tek Industries Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Hardware company?
The median Dividend Payout Ratio among Hardware companies is 0.47, based on 1,214 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mutual-Tek Industries Co's current Dividend Payout Ratio of 0.81 is 72.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Mutual-Tek Industries Co and its competitors. For the Hardware industry, the median Dividend Payout Ratio is 0.47 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mutual-Tek Industries Co's current Dividend Payout Ratio is 0.81, which is near median its own 10-year median of 0.75. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mutual-Tek Industries Co stock overvalued right now?
Based on GuruFocus' analysis, Mutual-Tek Industries Co (ROCO:6407) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$23.19, compared to a current price of NT$25.80 — trading 11.3% above its estimated fair value. The current Dividend Payout Ratio is 0.81, which is near median its 10-year median of 0.75 and 72.3% above the Hardware industry median of 0.47. Mutual-Tek Industries Co's overall GF Score™ is 66/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Mutual-Tek Industries Co (ROCO:6407), the current Dividend Payout Ratio is 0.81 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mutual-Tek Industries Co (ROCO:6407) Overvalued in 2026?
Based on GuruFocus' analysis, Mutual-Tek Industries Co stock appears to be overvalued.
The current stock price of NT$25.80 is trading 11.3% above its estimated GF Value™ of NT$23.19.
GuruFocus considers Mutual-Tek Industries Co to be Modestly Overvalued.
Key valuation signals for ROCO:6407:
Dividend Payout Ratio: 0.81 (near median its 10-year median of 0.75)
GF Value™: NT$23.19 vs. price of NT$25.80 (11.3% above fair value)
Industry Position: 72.3% above the Hardware median (#795 of 1214)
No single metric tells the full story. See the ROCO:6407 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mutual-Tek Industries Co Ltd is involved in manufacturing multi-layer and double-sided printed circuit boards (PCBs). Its product offerings include Rigid-Flex Board, High-Density Interconnect PCB, High Layer count, and Ultra-Thin PCB among others.
66GF Score
Get the complete analysis for ROCO:6407
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6407 has been successfully added to your 
