Impro Precision IndustriesSTU:7IP -3.17%67 Dividend Payout Ratio is 0.41 as of Dec. 2025, which is 5% below its 10-year median of 0.43. GuruFocus rates STU:7IP with a GF Score™ of 67/100 and a GF Value™ of €0.35 (Significantly Overvalued). The stock has 1 warning sign investors should review. Among 1,722 Industrial Products companies, Impro Precision Industries ranks worse than 54.53% on this metric.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Impro Precision Industries's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.41.
The historical rank and industry rank for Impro Precision Industries's Dividend Payout Ratio or its related term are showing as below:
STU:7IP'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.13 Med: 0.43 Max: 0.52
Current: 0.43
During the past 10 years, the highest Dividend Payout Ratio of Impro Precision Industries was 0.52. The lowest was 0.13. And the median was 0.43.
STU:7IP's Dividend Payout Ratio is ranked worse than 54.53% of 1722
companies
in the Industrial Products industry
Industry Median: 0.37
vs STU:7IP: 0.43
During the past 10 years, the highest Trailing Annual Dividend Yield of Impro Precision Industries was 8.60%. The lowest was 1.13%. And the median was 2.69%.
During the past 3 years, the average Dividends Per Share Growth Rate was 1.70% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 29.20% per year.
During the past 10 years, the highest 3-Year average Dividends Per Share Growth Rate of Impro Precision Industries was 56.00% per year. The lowest was 1.70% per year. And the median was 46.15% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Impro Precision Industries (STU:7IP) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Impro Precision Industries Dividend Payout Ratio Related Terms
Impro Precision Industries Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Impro Precision Industries Dividend Payout Ratio Chart
STU:7IP vs GEV, ETN, PH: Dividend Payout Ratio Comparison
For the Specialty Industrial Machinery subindustry, Impro Precision Industries's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Impro Precision Industries Dividend Payout Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Impro Precision Industries's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Impro Precision Industries's Dividend Payout Ratio falls into.
Impro Precision Industries Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Impro Precision Industries's Dividend Payout Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Impro Precision Industries (STU:7IP) has a Dividend Payout Ratio of 0.41 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Impro Precision Industries and its competitors. This is near median its historical median of 0.43. Over the past decade, Impro Precision Industries' Dividend Payout Ratio has ranged from 0.13 to 0.52. According to the industry distribution chart, Impro Precision Industries ranks #939 out of 1722 companies in the Industrial Products industry, placing it in the top 54.5%.
Is Impro Precision Industries' Dividend Payout Ratio too high?
Impro Precision Industries' current Dividend Payout Ratio of 0.41 is near median its 10-year median of 0.43. Over the past 10 years, this metric has ranged from a low of 0.13 to a high of 0.52. The Industrial Products industry median Dividend Payout Ratio is 0.37. Impro Precision Industries' value of 0.41 is 10.8% above this industry median. Based on the distribution chart, Impro Precision Industries ranks #939 out of 1722 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Impro Precision Industries has a GF Score™ of 67/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Impro Precision Industries' Dividend Payout Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Impro Precision Industries ranks #939 out of 1722 companies for Dividend Payout Ratio. This places Impro Precision Industries in the lower half of its industry. The industry median Dividend Payout Ratio is 0.37. Impro Precision Industries' value of 0.41 is 10.8% above this benchmark. Historically, Impro Precision Industries' own Dividend Payout Ratio has ranged from 0.13 to 0.52 over the past decade. While the company's 10-year median is 0.43 vs. the industry median of 0.37, Impro Precision Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,722 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Impro Precision Industries's current Dividend Payout Ratio of 0.41 is 10.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Impro Precision Industries and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Impro Precision Industries's current Dividend Payout Ratio is 0.41, which is near median its own 10-year median of 0.43. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Impro Precision Industries stock overvalued right now?
Based on GuruFocus' analysis, Impro Precision Industries (STU:7IP) is currently considered Significantly Overvalued. The stock's GF Value™ is €0.35, compared to a current price of €0.92 — trading 161.4% above its estimated fair value. The current Dividend Payout Ratio is 0.41, which is near median its 10-year median of 0.43 and 10.8% above the Industrial Products industry median of 0.37. Impro Precision Industries' overall GF Score™ is 67/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Impro Precision Industries (STU:7IP), the current Dividend Payout Ratio is 0.41 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Impro Precision Industries (STU:7IP) Overvalued in 2026?
Based on GuruFocus' analysis, Impro Precision Industries stock appears to be overvalued.
The current stock price of €0.92 is trading 161.4% above its estimated GF Value™ of €0.35.
GuruFocus considers Impro Precision Industries to be Significantly Overvalued.
Key valuation signals for STU:7IP:
Dividend Payout Ratio: 0.41 (near median its 10-year median of 0.43)
GF Value™: €0.35 vs. price of €0.92 (161.4% above fair value)
Industry Position: 10.8% above the Industrial Products median (#939 of 1722)
No single metric tells the full story. See the STU:7IP stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Impro Precision Industries Ltd is an investment holding company. It operates in four segments: Investment casting, Precision machining and others, Sand casting, and Surface Treatment. The products and services offered are widely applied to various end-markets, including passenger cars, commercial vehicles, high horsepower engines, hydraulic equipment, construction equipment, agricultural equipment, recreational boats and vehicles, aerospace, and medical. The company's geographical segments are the Americas, Europe, and Asia, of which key revenue is generated from the Americas.
67GF Score
Get the complete analysis for STU:7IP
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
STU:7IP has been successfully added to your 
