Impro Precision IndustriesSTU:7IP -3.83%64 PEG Ratio is 0.74 as of Jun. 30, 2026, which is 22% below its 10-year median of 0.95. GuruFocus rates STU:7IP with a GF Score™ of 64/100 and a GF Value™ of €0.35 (Significantly Overvalued). The stock has 1 warning sign investors should review. Among 1,282 Industrial Products companies, Impro Precision Industries ranks better than 79.8% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Impro Precision Industries's PEG Ratio or its related term are showing as below:
STU:7IP'
s PEG Ratio Range Over the Past 10 Years
Min: 0.42 Med: 0.95 Max: 1.46
Current: 0.74
During the past 10 years, Impro Precision Industries's highest PEG Ratio was 1.46. The lowest was 0.42. And the median was 0.95.
STU:7IP's PEG Ratio is ranked better than 79.8% of 1282
companies
in the Industrial Products industry
Industry Median: 1.865
vs STU:7IP: 0.74
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Impro Precision Industries (STU:7IP) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Impro Precision Industries PEG Ratio Related Terms
Impro Precision Industries PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Impro Precision Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Impro Precision Industries PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Impro Precision Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Impro Precision Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Impro Precision Industries (STU:7IP) has a PEG Ratio of 0.74 as of Jun. 30, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Impro Precision Industries and its competitors. This is 22% below median its historical median of 0.95. Over the past decade, Impro Precision Industries' PEG Ratio has ranged from 0.42 to 1.46. According to the industry distribution chart, Impro Precision Industries ranks #259 out of 1282 companies in the Industrial Products industry, placing it in the top 20.2%.
Is Impro Precision Industries' PEG Ratio too high?
Impro Precision Industries' current PEG Ratio of 0.74 is 22% below median its 10-year median of 0.95. Over the past 10 years, this metric has ranged from a low of 0.42 to a high of 1.46. The Industrial Products industry median PEG Ratio is 1.87. Impro Precision Industries' value of 0.74 is 60.3% below this industry median. Based on the distribution chart, Impro Precision Industries ranks #259 out of 1282 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Impro Precision Industries has a GF Score™ of 64/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Impro Precision Industries' PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Impro Precision Industries ranks #259 out of 1282 companies for PEG Ratio. This places Impro Precision Industries in the top 20% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.87. Impro Precision Industries' value of 0.74 is 60.3% below this benchmark. Historically, Impro Precision Industries' own PEG Ratio has ranged from 0.42 to 1.46 over the past decade. While the company's 10-year median is 0.95 vs. the industry median of 1.87, Impro Precision Industries has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.87, based on 1,282 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Impro Precision Industries's current PEG Ratio of 0.74 is 60.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Impro Precision Industries and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.87 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Impro Precision Industries's current PEG Ratio is 0.74, which is 22% below median its own 10-year median of 0.95. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Impro Precision Industries stock overvalued right now?
Based on GuruFocus' analysis, Impro Precision Industries (STU:7IP) is currently considered Significantly Overvalued. The stock's GF Value™ is €0.35, compared to a current price of €0.88 — trading 151.4% above its estimated fair value. The current PEG Ratio is 0.74, which is 22% below median its 10-year median of 0.95 and 60.3% below the Industrial Products industry median of 1.87. Impro Precision Industries' overall GF Score™ is 64/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Impro Precision Industries (STU:7IP), the current PEG Ratio is 0.74 as of Jun. 30, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Impro Precision Industries (STU:7IP) Overvalued in 2026?
Based on GuruFocus' analysis, Impro Precision Industries stock appears to be overvalued.
The current stock price of €0.88 is trading 151.4% above its estimated GF Value™ of €0.35.
GuruFocus considers Impro Precision Industries to be Significantly Overvalued.
Key valuation signals for STU:7IP:
PEG Ratio: 0.74 (22% below median its 10-year median of 0.95)
GF Value™: €0.35 vs. price of €0.88 (151.4% above fair value)
Industry Position: 60.3% below the Industrial Products median (#259 of 1282)
No single metric tells the full story. See the STU:7IP stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Impro Precision Industries Ltd is an investment holding company. It operates in four segments: Investment casting, Precision machining and others, Sand casting, and Surface Treatment. The products and services offered are widely applied to various end-markets, including passenger cars, commercial vehicles, high horsepower engines, hydraulic equipment, construction equipment, agricultural equipment, recreational boats and vehicles, aerospace, and medical. The company's geographical segments are the Americas, Europe, and Asia, of which key revenue is generated from the Americas.
64GF Score
Get the complete analysis for STU:7IP
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
STU:7IP has been successfully added to your 
