Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Sandur Manganese And Iron Ores's PEG Ratio or its related term are showing as below:
NSE:SANDUMA'
s PEG Ratio Range Over the Past 10 Years
Min: 0.03 Med: 0.8 Max: 1.58
Current: 0.68
During the past 13 years, Sandur Manganese And Iron Ores's highest PEG Ratio was 1.58. The lowest was 0.03. And the median was 0.80.
NSE:SANDUMA's PEG Ratio is ranked better than 71.5% of 200
companies
in the Steel industry
Industry Median: 1.46
vs NSE:SANDUMA: 0.68
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Sandur Manganese And Iron Ores (NSE:SANDUMA) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Sandur Manganese And Iron Ores PEG Ratio Related Terms
Sandur Manganese And Iron Ores PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:SANDUMA vs NUE, STLD, RS: PEG Ratio Comparison
For the Steel subindustry, Sandur Manganese And Iron Ores's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sandur Manganese And Iron Ores PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Sandur Manganese And Iron Ores's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Sandur Manganese And Iron Ores's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Sandur Manganese And Iron Ores (NSE:SANDUMA) has a PEG Ratio of 0.68 as of Jul. 15, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sandur Manganese And Iron Ores and its competitors. This is 15% below median its historical median of 0.80. Over the past decade, Sandur Manganese And Iron Ores' PEG Ratio has ranged from 0.03 to 1.58. According to the industry distribution chart, Sandur Manganese And Iron Ores ranks #57 out of 200 companies in the Steel industry, placing it in the top 28.5%.
Is Sandur Manganese And Iron Ores' PEG Ratio too high?
Sandur Manganese And Iron Ores' current PEG Ratio of 0.68 is 15% below median its 10-year median of 0.80. Over the past 10 years, this metric has ranged from a low of 0.03 to a high of 1.58. The Steel industry median PEG Ratio is 1.46. Sandur Manganese And Iron Ores' value of 0.68 is 53.4% below this industry median. Based on the distribution chart, Sandur Manganese And Iron Ores ranks #57 out of 200 companies in the Steel industry, which is above the industry midpoint. Overall, Sandur Manganese And Iron Ores has a GF Score™ of 75/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Sandur Manganese And Iron Ores' PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Sandur Manganese And Iron Ores ranks #57 out of 200 companies for PEG Ratio. This puts Sandur Manganese And Iron Ores in the upper half of its industry. The industry median PEG Ratio is 1.46. Sandur Manganese And Iron Ores' value of 0.68 is 53.4% below this benchmark. Historically, Sandur Manganese And Iron Ores' own PEG Ratio has ranged from 0.03 to 1.58 over the past decade. While the company's 10-year median is 0.80 vs. the industry median of 1.46, Sandur Manganese And Iron Ores has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.46, based on 200 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sandur Manganese And Iron Ores's current PEG Ratio of 0.68 is 53.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sandur Manganese And Iron Ores and its competitors. For the Steel industry, the median PEG Ratio is 1.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sandur Manganese And Iron Ores's current PEG Ratio is 0.68, which is 15% below median its own 10-year median of 0.80. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sandur Manganese And Iron Ores stock overvalued right now?
Based on GuruFocus' analysis, Sandur Manganese And Iron Ores (NSE:SANDUMA) is currently considered Significantly Undervalued. The stock's GF Value™ is ₹303.66, compared to a current price of ₹199.38 — trading 34.3% below its estimated fair value. The current PEG Ratio is 0.68, which is 15% below median its 10-year median of 0.80 and 53.4% below the Steel industry median of 1.46. Sandur Manganese And Iron Ores' overall GF Score™ is 75/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Sandur Manganese And Iron Ores (NSE:SANDUMA), the current PEG Ratio is 0.68 as of Jul. 15, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sandur Manganese And Iron Ores (NSE:SANDUMA) Overvalued in 2026?
Based on GuruFocus' analysis, Sandur Manganese And Iron Ores stock appears to be undervalued.
The current stock price of ₹199.38 is trading 34.3% below its estimated GF Value™ of ₹303.66.
GuruFocus considers Sandur Manganese And Iron Ores to be Significantly Undervalued.
Key valuation signals for NSE:SANDUMA:
PEG Ratio: 0.68 (15% below median its 10-year median of 0.80)
GF Value™: ₹303.66 vs. price of ₹199.38 (34.3% below fair value)
Industry Position: 53.4% below the Steel median (#57 of 200)
No single metric tells the full story. See the NSE:SANDUMA stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sandur Manganese And Iron Ores Business Description
Sandur Manganese And Iron Ores Ltd is a mining company. It is engaged in the mining of manganese and iron ores in Deogiri village of Sandur taluk, Ballari District, Karnataka. The Company is also engaged in the manufacture of ferroalloys, and coke and energy at Vyasanakere, Hosapete. Its operating segment includes Mining and Ferroalloys, and Coke and Energy. The company generates maximum revenue from the Mining segment. Geographically, it derives all of its revenue from within India.
75GF Score
Get the complete analysis for NSE:SANDUMA
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SANDUMA has been successfully added to your 
