What is Shieh Yih Machinery Industry Co PEG Ratio?
Shieh Yih Machinery Industry CoROCO:4533 74 PEG Ratio is 18.05 as of Jul. 12, 2026, which is 695% above its 10-year median of 2.27. GuruFocus rates ROCO:4533 with a GF Score™ of 74/100 and a GF Value™ of NT$30.60 (Fairly Valued). The stock has 5 warning signs investors should review. Among 1,276 Industrial Products companies, Shieh Yih Machinery Industry Co ranks worse than 92.4% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Shieh Yih Machinery Industry Co's PEG Ratio or its related term are showing as below:
ROCO:4533'
s PEG Ratio Range Over the Past 10 Years
Min: 0.87 Med: 2.27 Max: 18.05
Current: 18.05
During the past 13 years, Shieh Yih Machinery Industry Co's highest PEG Ratio was 18.05. The lowest was 0.87. And the median was 2.27.
ROCO:4533's PEG Ratio is ranked worse than 92.4% of 1276
companies
in the Industrial Products industry
Industry Median: 1.825
vs ROCO:4533: 18.05
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Shieh Yih Machinery Industry Co (ROCO:4533) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Shieh Yih Machinery Industry Co PEG Ratio Related Terms
Shieh Yih Machinery Industry Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Shieh Yih Machinery Industry Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shieh Yih Machinery Industry Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shieh Yih Machinery Industry Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Shieh Yih Machinery Industry Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Shieh Yih Machinery Industry Co (ROCO:4533) has a PEG Ratio of 18.05 as of Jul. 12, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shieh Yih Machinery Industry Co and its competitors. This is 695% above median its historical median of 2.27. Over the past decade, Shieh Yih Machinery Industry Co's PEG Ratio has ranged from 0.87 to 18.05. According to the industry distribution chart, Shieh Yih Machinery Industry Co ranks #1179 out of 1276 companies in the Industrial Products industry, placing it in the top 92.4%.
Is Shieh Yih Machinery Industry Co's PEG Ratio too high?
Shieh Yih Machinery Industry Co's current PEG Ratio of 18.05 is 695% above median its 10-year median of 2.27. Over the past 10 years, this metric has ranged from a low of 0.87 to a high of 18.05. The Industrial Products industry median PEG Ratio is 1.83. Shieh Yih Machinery Industry Co's value of 18.05 is 889% above this industry median. Based on the distribution chart, Shieh Yih Machinery Industry Co ranks #1179 out of 1276 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Shieh Yih Machinery Industry Co has a GF Score™ of 74/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Shieh Yih Machinery Industry Co's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Shieh Yih Machinery Industry Co ranks #1179 out of 1276 companies for PEG Ratio. This places Shieh Yih Machinery Industry Co in the lower half of its industry. The industry median PEG Ratio is 1.83. Shieh Yih Machinery Industry Co's value of 18.05 is 889% above this benchmark. Historically, Shieh Yih Machinery Industry Co's own PEG Ratio has ranged from 0.87 to 18.05 over the past decade. While the company's 10-year median is 2.27 vs. the industry median of 1.83, Shieh Yih Machinery Industry Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.83, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shieh Yih Machinery Industry Co's current PEG Ratio of 18.05 is 889% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shieh Yih Machinery Industry Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.83 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shieh Yih Machinery Industry Co's current PEG Ratio is 18.05, which is 695% above median its own 10-year median of 2.27. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shieh Yih Machinery Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Shieh Yih Machinery Industry Co (ROCO:4533) is currently considered Fairly Valued. The stock's GF Value™ is NT$30.60, compared to a current price of NT$29.15 — trading 4.7% below its estimated fair value. The current PEG Ratio is 18.05, which is 695% above median its 10-year median of 2.27 and 889% above the Industrial Products industry median of 1.83. Shieh Yih Machinery Industry Co's overall GF Score™ is 74/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Shieh Yih Machinery Industry Co (ROCO:4533), the current PEG Ratio is 18.05 as of Jul. 12, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shieh Yih Machinery Industry Co (ROCO:4533) Overvalued in 2026?
Based on GuruFocus' analysis, Shieh Yih Machinery Industry Co stock appears to be undervalued.
The current stock price of NT$29.15 is trading 4.7% below its estimated GF Value™ of NT$30.60.
GuruFocus considers Shieh Yih Machinery Industry Co to be Fairly Valued.
Key valuation signals for ROCO:4533:
PEG Ratio: 18.05 (695% above median its 10-year median of 2.27)
GF Value™: NT$30.60 vs. price of NT$29.15 (4.7% below fair value)
Industry Position: 889% above the Industrial Products median (#1179 of 1276)
No single metric tells the full story. See the ROCO:4533 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shieh Yih Machinery Industry Co Business Description
Shieh Yih Machinery Industry Co Ltd designs, develops, manufactures, and sells machinery, and provides IT software services and other design services. The company derives the majority of its revenue from sales of equipment. Its products comprise Straight Side Crank Servo Press, Straight Side Eccentric Gear Press, Link motion Press, and other products. Geographically, the company operates in China, Taiwan, America, Europe and others.
74GF Score
Get the complete analysis for ROCO:4533
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4533 has been successfully added to your 
