Teco Electric & Machinery CoTPE:1504 +1.45%72 PEG Ratio is 3.89 as of Jul. 06, 2026, which is 5% below its 10-year median of 4.10. GuruFocus rates TPE:1504 with a GF Score™ of 72/100 and a GF Value™ of NT$54.27 (Modestly Overvalued). The stock has 3 warning signs investors should review. Among 1,280 Industrial Products companies, Teco Electric & Machinery Co ranks worse than 72.34% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Teco Electric & Machinery Co's PEG Ratio or its related term are showing as below:
TPE:1504'
s PEG Ratio Range Over the Past 10 Years
Min: 1.73 Med: 4.1 Max: 106.41
Current: 3.89
During the past 13 years, Teco Electric & Machinery Co's highest PEG Ratio was 106.41. The lowest was 1.73. And the median was 4.10.
TPE:1504's PEG Ratio is ranked worse than 72.34% of 1280
companies
in the Industrial Products industry
Industry Median: 1.885
vs TPE:1504: 3.89
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Teco Electric & Machinery Co (TPE:1504) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Teco Electric & Machinery Co PEG Ratio Related Terms
Teco Electric & Machinery Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Teco Electric & Machinery Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Teco Electric & Machinery Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Teco Electric & Machinery Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Teco Electric & Machinery Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Teco Electric & Machinery Co (TPE:1504) has a PEG Ratio of 3.89 as of Jul. 06, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Teco Electric & Machinery Co and its competitors. This is near median its historical median of 4.10. Over the past decade, Teco Electric & Machinery Co's PEG Ratio has ranged from 1.73 to 106.41. According to the industry distribution chart, Teco Electric & Machinery Co ranks #926 out of 1280 companies in the Industrial Products industry, placing it in the top 72.3%.
Is Teco Electric & Machinery Co's PEG Ratio too high?
Teco Electric & Machinery Co's current PEG Ratio of 3.89 is near median its 10-year median of 4.10. Over the past 10 years, this metric has ranged from a low of 1.73 to a high of 106.41. The Industrial Products industry median PEG Ratio is 1.89. Teco Electric & Machinery Co's value of 3.89 is 106.4% above this industry median. Based on the distribution chart, Teco Electric & Machinery Co ranks #926 out of 1280 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Teco Electric & Machinery Co has a GF Score™ of 72/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Teco Electric & Machinery Co's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Teco Electric & Machinery Co ranks #926 out of 1280 companies for PEG Ratio. This places Teco Electric & Machinery Co in the lower half of its industry. The industry median PEG Ratio is 1.89. Teco Electric & Machinery Co's value of 3.89 is 106.4% above this benchmark. Historically, Teco Electric & Machinery Co's own PEG Ratio has ranged from 1.73 to 106.41 over the past decade. While the company's 10-year median is 4.10 vs. the industry median of 1.89, Teco Electric & Machinery Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.89, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Teco Electric & Machinery Co's current PEG Ratio of 3.89 is 106.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Teco Electric & Machinery Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.89 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Teco Electric & Machinery Co's current PEG Ratio is 3.89, which is near median its own 10-year median of 4.10. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Teco Electric & Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Teco Electric & Machinery Co (TPE:1504) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$54.27, compared to a current price of NT$70.00 — trading 29% above its estimated fair value. The current PEG Ratio is 3.89, which is near median its 10-year median of 4.10 and 106.4% above the Industrial Products industry median of 1.89. Teco Electric & Machinery Co's overall GF Score™ is 72/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Teco Electric & Machinery Co (TPE:1504), the current PEG Ratio is 3.89 as of Jul. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Teco Electric & Machinery Co (TPE:1504) Overvalued in 2026?
Based on GuruFocus' analysis, Teco Electric & Machinery Co stock appears to be overvalued.
The current stock price of NT$70.00 is trading 29% above its estimated GF Value™ of NT$54.27.
GuruFocus considers Teco Electric & Machinery Co to be Modestly Overvalued.
Key valuation signals for TPE:1504:
PEG Ratio: 3.89 (near median its 10-year median of 4.10)
GF Value™: NT$54.27 vs. price of NT$70.00 (29% above fair value)
Industry Position: 106.4% above the Industrial Products median (#926 of 1280)
No single metric tells the full story. See the TPE:1504 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Teco Electric & Machinery Co Ltd is a Taiwan-based company that manufactures and sells various types of mechanical equipment, air-conditioning units, and electronic equipment products. The company's Heavy industrial products, the product line by revenue contribution, are used in fluid machinery, elevators, cranes, petrochemical machinery, rolling mills, pumps, and various other machinery. The company's home appliance offerings comprise air conditioners, refrigerators, washing machines, televisions, air purifiers, and others. The company also provides automation products such as converters, servo controllers, and circuit breakers. The company generates the majority of its revenue from Taiwan.
72GF Score
Get the complete analysis for TPE:1504
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1504 has been successfully added to your 
