King Slide Works CoTPE:2059 +1.91%92 PEG Ratio is 1.85 as of Jul. 09, 2026, which is 23% above its 10-year median of 1.50. GuruFocus rates TPE:2059 with a GF Score™ of 92/100 and a GF Value™ of NT$4,236.60 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 145 Furnishings, Fixtures & Appliances companies, King Slide Works Co ranks better than 53.1% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for King Slide Works Co's PEG Ratio or its related term are showing as below:
TPE:2059'
s PEG Ratio Range Over the Past 10 Years
Min: 0.54 Med: 1.5 Max: 138.25
Current: 1.85
During the past 13 years, King Slide Works Co's highest PEG Ratio was 138.25. The lowest was 0.54. And the median was 1.50.
TPE:2059's PEG Ratio is ranked better than 53.1% of 145
companies
in the Furnishings, Fixtures & Appliances industry
Industry Median: 1.97
vs TPE:2059: 1.85
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
King Slide Works Co (TPE:2059) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
King Slide Works Co PEG Ratio Related Terms
King Slide Works Co PEG Ratio Historical Data
* Premium members only.
The historical data trend for King Slide Works Co's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Furnishings, Fixtures & Appliances subindustry, King Slide Works Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
King Slide Works Co PEG Ratio vs Furnishings, Fixtures & Appliances Industry
For the Furnishings, Fixtures & Appliances industry and Consumer Cyclical sector, King Slide Works Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where King Slide Works Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
King Slide Works Co (TPE:2059) has a PEG Ratio of 1.85 as of Jul. 09, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on King Slide Works Co and its competitors. This is 23% above median its historical median of 1.50. Over the past decade, King Slide Works Co's PEG Ratio has ranged from 0.54 to 138.25. According to the industry distribution chart, King Slide Works Co ranks #68 out of 145 companies in the Furnishings, Fixtures & Appliances industry, placing it in the top 46.9%.
Is King Slide Works Co's PEG Ratio too high?
King Slide Works Co's current PEG Ratio of 1.85 is 23% above median its 10-year median of 1.50. Over the past 10 years, this metric has ranged from a low of 0.54 to a high of 138.25. The Furnishings, Fixtures & Appliances industry median PEG Ratio is 1.97. King Slide Works Co's value of 1.85 is 6.1% below this industry median. Based on the distribution chart, King Slide Works Co ranks #68 out of 145 companies in the Furnishings, Fixtures & Appliances industry, which is above the industry midpoint. Overall, King Slide Works Co has a GF Score™ of 92/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does King Slide Works Co's PEG Ratio compare to SN and SGI?
According to the Furnishings, Fixtures & Appliances industry distribution chart, King Slide Works Co ranks #68 out of 145 companies for PEG Ratio. This puts King Slide Works Co in the upper half of its industry. The industry median PEG Ratio is 1.97. King Slide Works Co's value of 1.85 is 6.1% below this benchmark. Historically, King Slide Works Co's own PEG Ratio has ranged from 0.54 to 138.25 over the past decade. While the company's 10-year median is 1.50 vs. the industry median of 1.97, King Slide Works Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Furnishings, Fixtures & Appliances company?
The median PEG Ratio among Furnishings, Fixtures & Appliances companies is 1.97, based on 145 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. King Slide Works Co's current PEG Ratio of 1.85 is 6.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on King Slide Works Co and its competitors. For the Furnishings, Fixtures & Appliances industry, the median PEG Ratio is 1.97 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. King Slide Works Co's current PEG Ratio is 1.85, which is 23% above median its own 10-year median of 1.50. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is King Slide Works Co stock overvalued right now?
Based on GuruFocus' analysis, King Slide Works Co (TPE:2059) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$4,236.60, compared to a current price of NT$8,250.00 — trading 94.7% above its estimated fair value. The current PEG Ratio is 1.85, which is 23% above median its 10-year median of 1.50 and 6.1% below the Furnishings, Fixtures & Appliances industry median of 1.97. King Slide Works Co's overall GF Score™ is 92/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For King Slide Works Co (TPE:2059), the current PEG Ratio is 1.85 as of Jul. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is King Slide Works Co (TPE:2059) Overvalued in 2026?
Based on GuruFocus' analysis, King Slide Works Co stock appears to be overvalued.
The current stock price of NT$8,250.00 is trading 94.7% above its estimated GF Value™ of NT$4,236.60.
GuruFocus considers King Slide Works Co to be Significantly Overvalued.
Key valuation signals for TPE:2059:
PEG Ratio: 1.85 (23% above median its 10-year median of 1.50)
GF Value™: NT$4,236.60 vs. price of NT$8,250.00 (94.7% above fair value)
Industry Position: 6.1% below the Furnishings, Fixtures & Appliances median (#68 of 145)
No single metric tells the full story. See the TPE:2059 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
King Slide Works Co Ltd mainly designs, manufactures and sells the following products: Rail kits for cloud computing servers and data devices. Furniture, wooden kitchen accessories, slides and molds. Its segments are King Slide Works Co, King Slide Technology Co, and others. The company generates majority of revenue from King Slide Technology Co, Ltd. mainly R&D, designs and sells the rail kits for servers and network communications equipment. The company has presence in Taiwan, USA, China, and Others. The company generates majority of revenue from USA. The company's products includes Kitchen & Furniture Solutions, Special Applications, Server Rail Kits & CMA, and Consumer Electronics Solutions.
92GF Score
Get the complete analysis for TPE:2059
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2059 has been successfully added to your 
