Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
King Slide Works CoTPE:2059 +9.96%92 5-Year Yield-on-Cost % is 1.56 as of Aug. 05, 2026, which is 81% below its 10-year median of 8.24. GuruFocus rates TPE:2059 with a GF Score™ of 92/100 and a GF Value™ of NT$4,601.64 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 244 Furnishings, Fixtures & Appliances companies, King Slide Works Co ranks worse than 72.54% on this metric.
King Slide Works Co's yield on cost for the quarter that ended in Mar. 2026 was 1.56.
The historical rank and industry rank for King Slide Works Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TPE:2059'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.56 Med: 8.24 Max: 14.53
Current: 1.56
During the past 13 years, King Slide Works Co's highest Yield on Cost was 14.53. The lowest was 1.56. And the median was 8.24.
TPE:2059's 5-Year Yield-on-Cost % is ranked worse than 72.54% of 244
companies
in the Furnishings, Fixtures & Appliances industry
Industry Median: 3.44
vs TPE:2059: 1.56
King Slide Works Co (TPE:2059) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
King Slide Works Co 5-Year Yield-on-Cost % Related Terms
TPE:2059 vs SN, SGI, MHK: 5-Year Yield-on-Cost % Comparison
For the Furnishings, Fixtures & Appliances subindustry, King Slide Works Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
King Slide Works Co 5-Year Yield-on-Cost % vs Furnishings, Fixtures & Appliances Industry
For the Furnishings, Fixtures & Appliances industry and Consumer Cyclical sector, King Slide Works Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where King Slide Works Co's 5-Year Yield-on-Cost % falls into.
King Slide Works Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
King Slide Works Co (TPE:2059) has a 5-Year Yield-on-Cost % of 1.56 as of Aug. 05, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on King Slide Works Co and its competitors. This is 81% below median its historical median of 8.24. Over the past decade, King Slide Works Co's 5-Year Yield-on-Cost % has ranged from 1.56 to 14.53. According to the industry distribution chart, King Slide Works Co ranks #177 out of 244 companies in the Furnishings, Fixtures & Appliances industry, placing it in the top 72.5%.
Is King Slide Works Co's 5-Year Yield-on-Cost % too high?
King Slide Works Co's current 5-Year Yield-on-Cost % of 1.56 is 81% below median its 10-year median of 8.24. Over the past 10 years, this metric has ranged from a low of 1.56 to a high of 14.53. The Furnishings, Fixtures & Appliances industry median 5-Year Yield-on-Cost % is 3.44. King Slide Works Co's value of 1.56 is 54.7% below this industry median. Based on the distribution chart, King Slide Works Co ranks #177 out of 244 companies in the Furnishings, Fixtures & Appliances industry, which is below the industry midpoint. Overall, King Slide Works Co has a GF Score™ of 92/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does King Slide Works Co's 5-Year Yield-on-Cost % compare to SN and SGI?
According to the Furnishings, Fixtures & Appliances industry distribution chart, King Slide Works Co ranks #177 out of 244 companies for 5-Year Yield-on-Cost %. This places King Slide Works Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.44. King Slide Works Co's value of 1.56 is 54.7% below this benchmark. Historically, King Slide Works Co's own 5-Year Yield-on-Cost % has ranged from 1.56 to 14.53 over the past decade. While the company's 10-year median is 8.24 vs. the industry median of 3.44, King Slide Works Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Furnishings, Fixtures & Appliances company?
The median 5-Year Yield-on-Cost % among Furnishings, Fixtures & Appliances companies is 3.44, based on 244 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. King Slide Works Co's current 5-Year Yield-on-Cost % of 1.56 is 54.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on King Slide Works Co and its competitors. For the Furnishings, Fixtures & Appliances industry, the median 5-Year Yield-on-Cost % is 3.44 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. King Slide Works Co's current 5-Year Yield-on-Cost % is 1.56, which is 81% below median its own 10-year median of 8.24. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is King Slide Works Co stock overvalued right now?
Based on GuruFocus' analysis, King Slide Works Co (TPE:2059) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$4,601.64, compared to a current price of NT$9,495.00 — trading 106.3% above its estimated fair value. The current 5-Year Yield-on-Cost % is 1.56, which is 81% below median its 10-year median of 8.24 and 54.7% below the Furnishings, Fixtures & Appliances industry median of 3.44. King Slide Works Co's overall GF Score™ is 92/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For King Slide Works Co (TPE:2059), the current 5-Year Yield-on-Cost % is 1.56 as of Aug. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is King Slide Works Co (TPE:2059) Overvalued in 2026?
Based on GuruFocus' analysis, King Slide Works Co stock appears to be overvalued.
The current stock price of NT$9,495.00 is trading 106.3% above its estimated GF Value™ of NT$4,601.64.
GuruFocus considers King Slide Works Co to be Significantly Overvalued.
Key valuation signals for TPE:2059:
5-Year Yield-on-Cost %: 1.56 (81% below median its 10-year median of 8.24)
GF Value™: NT$4,601.64 vs. price of NT$9,495.00 (106.3% above fair value)
Industry Position: 54.7% below the Furnishings, Fixtures & Appliances median (#177 of 244)
No single metric tells the full story. See the TPE:2059 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
King Slide Works Co Ltd mainly designs, manufactures and sells the following products: Rail kits for cloud computing servers and data devices. Furniture, wooden kitchen accessories, slides and molds. Its segments are King Slide Works Co, King Slide Technology Co, and others. The company generates majority of revenue from King Slide Technology Co, Ltd. mainly R&D, designs and sells the rail kits for servers and network communications equipment. The company has presence in Taiwan, USA, China, and Others. The company generates majority of revenue from USA. The company's products includes Kitchen & Furniture Solutions, Special Applications, Server Rail Kits & CMA, and Consumer Electronics Solutions.
92GF Score
Get the complete analysis for TPE:2059
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2059 has been successfully added to your 
