AD Plastik DDZAG:ADPL +7.53%77 PEG Ratio is 1.22 as of Jul. 04, 2026, which is 76% below its 10-year median of 5.07. GuruFocus rates ZAG:ADPL with a GF Score™ of 77/100 and a GF Value™ of €16.83 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 672 Vehicles & Parts companies, AD Plastik DD ranks worse than 50.45% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for AD Plastik DD's PEG Ratio or its related term are showing as below:
ZAG:ADPL'
s PEG Ratio Range Over the Past 10 Years
Min: 1.22 Med: 5.07 Max: 395.49
Current: 1.22
During the past 13 years, AD Plastik DD's highest PEG Ratio was 395.49. The lowest was 1.22. And the median was 5.07.
ZAG:ADPL's PEG Ratio is ranked worse than 50.45% of 672
companies
in the Vehicles & Parts industry
Industry Median: 1.12
vs ZAG:ADPL: 1.22
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
AD Plastik DD (ZAG:ADPL) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
AD Plastik DD PEG Ratio Related Terms
AD Plastik DD PEG Ratio Historical Data
* Premium members only.
The historical data trend for AD Plastik DD's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, AD Plastik DD's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
AD Plastik DD PEG Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, AD Plastik DD's PEG Ratio distribution charts can be found below:
* The bar in red indicates where AD Plastik DD's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
AD Plastik DD (ZAG:ADPL) has a PEG Ratio of 1.22 as of Jul. 04, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on AD Plastik DD and its competitors. This is 76% below median its historical median of 5.07. Over the past decade, AD Plastik DD's PEG Ratio has ranged from 1.22 to 395.49. According to the industry distribution chart, AD Plastik DD ranks #339 out of 672 companies in the Vehicles & Parts industry, placing it in the top 50.4%.
Is AD Plastik DD's PEG Ratio too high?
AD Plastik DD's current PEG Ratio of 1.22 is 76% below median its 10-year median of 5.07. Over the past 10 years, this metric has ranged from a low of 1.22 to a high of 395.49. The Vehicles & Parts industry median PEG Ratio is 1.12. AD Plastik DD's value of 1.22 is 8.9% above this industry median. Based on the distribution chart, AD Plastik DD ranks #339 out of 672 companies in the Vehicles & Parts industry, which is below the industry midpoint. Overall, AD Plastik DD has a GF Score™ of 77/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does AD Plastik DD's PEG Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, AD Plastik DD ranks #339 out of 672 companies for PEG Ratio. This places AD Plastik DD in the lower half of its industry. The industry median PEG Ratio is 1.12. AD Plastik DD's value of 1.22 is 8.9% above this benchmark. Historically, AD Plastik DD's own PEG Ratio has ranged from 1.22 to 395.49 over the past decade. While the company's 10-year median is 5.07 vs. the industry median of 1.12, AD Plastik DD has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Vehicles & Parts company?
The median PEG Ratio among Vehicles & Parts companies is 1.12, based on 672 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. AD Plastik DD's current PEG Ratio of 1.22 is 8.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on AD Plastik DD and its competitors. For the Vehicles & Parts industry, the median PEG Ratio is 1.12 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. AD Plastik DD's current PEG Ratio is 1.22, which is 76% below median its own 10-year median of 5.07. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is AD Plastik DD stock overvalued right now?
Based on GuruFocus' analysis, AD Plastik DD (ZAG:ADPL) is currently considered Significantly Overvalued. The stock's GF Value™ is €16.83, compared to a current price of €30.00 — trading 78.3% above its estimated fair value. The current PEG Ratio is 1.22, which is 76% below median its 10-year median of 5.07 and 8.9% above the Vehicles & Parts industry median of 1.12. AD Plastik DD's overall GF Score™ is 77/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For AD Plastik DD (ZAG:ADPL), the current PEG Ratio is 1.22 as of Jul. 04, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is AD Plastik DD (ZAG:ADPL) Overvalued in 2026?
Based on GuruFocus' analysis, AD Plastik DD stock appears to be overvalued.
The current stock price of €30.00 is trading 78.3% above its estimated GF Value™ of €16.83.
GuruFocus considers AD Plastik DD to be Significantly Overvalued.
Key valuation signals for ZAG:ADPL:
PEG Ratio: 1.22 (76% below median its 10-year median of 5.07)
GF Value™: €16.83 vs. price of €30.00 (78.3% above fair value)
Industry Position: 8.9% above the Vehicles & Parts median (#339 of 672)
No single metric tells the full story. See the ZAG:ADPL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
AD Plastik DD is engaged in the development and production of interior and exterior car components in Croatia. Its product portfolio comprises internal glass scrapers, windshield seal covers, handrails, rear bumpers, diffusors, visors, radio trims, gear shift trims, instrumental panels, etc. The Group's operating segments are: EU, UK, and Serbia market, which generate maximum revenue, and Russia market. Geographically, it generates maximum revenue from Slovenia, followed by Romania, Slovakia, Serbia, Poland, Hungary, Italy, and other countries.
77GF Score
Get the complete analysis for ZAG:ADPL
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ZAG:ADPL has been successfully added to your 
