Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
AD Plastik DDZAG:ADPL +0.69%77 5-Year Yield-on-Cost % is 2.75 as of Jul. 24, 2026, which is 213% above its 10-year median of 0.88. GuruFocus rates ZAG:ADPL with a GF Score™ of 77/100 and a GF Value™ of €16.88 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 863 Vehicles & Parts companies, AD Plastik DD ranks worse than 115874.74% on this metric.
AD Plastik DD's yield on cost for the quarter that ended in Mar. 2026 was 2.75.
The historical rank and industry rank for AD Plastik DD's 5-Year Yield-on-Cost % or its related term are showing as below:
ZAG:ADPL'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0 Med: 0.88 Max: 2.75
Current: 2.75
During the past 13 years, AD Plastik DD's highest Yield on Cost was 2.75. The lowest was 0.00. And the median was 0.88.
ZAG:ADPL's 5-Year Yield-on-Cost % is not ranked
in the Vehicles & Parts industry.
Industry Median: 3.15
vs ZAG:ADPL: 2.75
AD Plastik DD (ZAG:ADPL) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
AD Plastik DD 5-Year Yield-on-Cost % Related Terms
ZAG:ADPL vs ORLY, AZO, GPC: 5-Year Yield-on-Cost % Comparison
For the Auto Parts subindustry, AD Plastik DD's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
AD Plastik DD 5-Year Yield-on-Cost % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, AD Plastik DD's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where AD Plastik DD's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of AD Plastik DD is calculated as
AD Plastik DD (ZAG:ADPL) has a 5-Year Yield-on-Cost % of 2.75 as of Jul. 24, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on AD Plastik DD and its competitors. This is 213% above median its historical median of 0.88. According to the industry distribution chart, AD Plastik DD ranks #999999 out of 863 companies in the Vehicles & Parts industry.
Is AD Plastik DD's 5-Year Yield-on-Cost % too high?
AD Plastik DD's current 5-Year Yield-on-Cost % of 2.75 is 213% above median its 10-year median of 0.88. The Vehicles & Parts industry median 5-Year Yield-on-Cost % is 3.15. AD Plastik DD's value of 2.75 is 12.7% below this industry median. Based on the distribution chart, AD Plastik DD ranks #999999 out of 863 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, AD Plastik DD has a GF Score™ of 77/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does AD Plastik DD's 5-Year Yield-on-Cost % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, AD Plastik DD ranks #999999 out of 863 companies for 5-Year Yield-on-Cost %. This places AD Plastik DD in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.15. AD Plastik DD's value of 2.75 is 12.7% below this benchmark. While the company's 10-year median is 0.88 vs. the industry median of 3.15, AD Plastik DD has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Vehicles & Parts company?
The median 5-Year Yield-on-Cost % among Vehicles & Parts companies is 3.15, based on 863 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. AD Plastik DD's current 5-Year Yield-on-Cost % of 2.75 is 12.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on AD Plastik DD and its competitors. For the Vehicles & Parts industry, the median 5-Year Yield-on-Cost % is 3.15 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. AD Plastik DD's current 5-Year Yield-on-Cost % is 2.75, which is 213% above median its own 10-year median of 0.88. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is AD Plastik DD stock overvalued right now?
Based on GuruFocus' analysis, AD Plastik DD (ZAG:ADPL) is currently considered Significantly Overvalued. The stock's GF Value™ is €16.88, compared to a current price of €29.30 — trading 73.6% above its estimated fair value. The current 5-Year Yield-on-Cost % is 2.75, which is 213% above median its 10-year median of 0.88 and 12.7% below the Vehicles & Parts industry median of 3.15. AD Plastik DD's overall GF Score™ is 77/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For AD Plastik DD (ZAG:ADPL), the current 5-Year Yield-on-Cost % is 2.75 as of Jul. 24, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is AD Plastik DD (ZAG:ADPL) Overvalued in 2026?
Based on GuruFocus' analysis, AD Plastik DD stock appears to be overvalued.
The current stock price of €29.30 is trading 73.6% above its estimated GF Value™ of €16.88.
GuruFocus considers AD Plastik DD to be Significantly Overvalued.
Key valuation signals for ZAG:ADPL:
5-Year Yield-on-Cost %: 2.75 (213% above median its 10-year median of 0.88)
GF Value™: €16.88 vs. price of €29.30 (73.6% above fair value)
Industry Position: 12.7% below the Vehicles & Parts median (#999999 of 863)
No single metric tells the full story. See the ZAG:ADPL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
AD Plastik DD is engaged in the development and production of interior and exterior car components in Croatia. Its product portfolio comprises internal glass scrapers, windshield seal covers, handrails, rear bumpers, diffusors, visors, radio trims, gear shift trims, instrumental panels, etc. The Group's operating segments are: EU, UK, and Serbia market, which generate maximum revenue, and Russia market. Geographically, it generates maximum revenue from Slovenia, followed by Romania, Slovakia, Serbia, Poland, Hungary, Italy, and other countries.
77GF Score
Get the complete analysis for ZAG:ADPL
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ZAG:ADPL has been successfully added to your 
