Talbros EngineeringBOM:538987 +0.97%87 Pretax Margin % is 9.02% as of Mar. 2026, which is 42% above its 10-year median of 6.33. GuruFocus rates BOM:538987 with a GF Score™ of 87/100 and a GF Value™ of ₹788.97 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 1,322 Vehicles & Parts companies, Talbros Engineering ranks better than 66.87% on this metric.
The historical rank and industry rank for Talbros Engineering's Pretax Margin % or its related term are showing as below:
BOM:538987'
s Pretax Margin % Range Over the Past 10 Years
Min: 2.43 Med: 6.33 Max: 8.78
Current: 7.34
BOM:538987's Pretax Margin % is ranked better than 66.87% of 1322
companies
in the Vehicles & Parts industry
Industry Median: 4.425
vs BOM:538987: 7.34
The pretax margin, as know as pretax profit margin, is widely used to measure the operating efficiency of a company before deducting taxes.
The pretax margin is sometimes preferred over the net margin as tax expenditures can make profitability comparisons between companies misleading.
It is a useful tool to compare companies operating in the same sector and less effective when comparing companies from other sectors as each industry generally has different operating expenses and sales patterns.
The long term trend of the pretax margin is a good indicator of the competitiveness and health of the business.
Talbros Engineering Pretax Margin % Related Terms
Talbros Engineering Pretax Margin % Historical Data
* Premium members only.
The historical data trend for Talbros Engineering's Pretax Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:538987 vs ORLY, AZO: Pretax Margin % Comparison
For the Auto Parts subindustry, Talbros Engineering's Pretax Margin %, along with its competitors' market caps and Pretax Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Talbros Engineering Pretax Margin % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Talbros Engineering's Pretax Margin % distribution charts can be found below:
* The bar in red indicates where Talbros Engineering's Pretax Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Talbros Engineering (BOM:538987) has a Pretax Margin % of 9.02% as of Mar. 2026. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Talbros Engineering and its competitors. This is 42% above median its historical median of 6.33. Over the past decade, Talbros Engineering's Pretax Margin % has ranged from 2.43 to 8.78. According to the industry distribution chart, Talbros Engineering ranks #438 out of 1322 companies in the Vehicles & Parts industry, placing it in the top 33.1%.
Is Talbros Engineering's Pretax Margin % too high?
Talbros Engineering's current Pretax Margin % of 9.02% is 42% above median its 10-year median of 6.33. Over the past 10 years, this metric has ranged from a low of 2.43 to a high of 8.78. The Vehicles & Parts industry median Pretax Margin % is 4.43. Talbros Engineering's value of 9.02% is 103.8% above this industry median. Based on the distribution chart, Talbros Engineering ranks #438 out of 1322 companies in the Vehicles & Parts industry, which is above the industry midpoint. Overall, Talbros Engineering has a GF Score™ of 87/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Talbros Engineering's Pretax Margin % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Talbros Engineering ranks #438 out of 1322 companies for Pretax Margin %. This puts Talbros Engineering in the upper half of its industry. The industry median Pretax Margin % is 4.43. Talbros Engineering's value of 9.02% is 103.8% above this benchmark. Historically, Talbros Engineering's own Pretax Margin % has ranged from 2.43 to 8.78 over the past decade. While the company's 10-year median is 6.33 vs. the industry median of 4.43, Talbros Engineering has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Pretax Margin % for a Vehicles & Parts company?
The median Pretax Margin % among Vehicles & Parts companies is 4.43, based on 1,322 companies in the industry. Companies in the top quartile (top 25%) have a Pretax Margin % significantly above this median, while those in the bottom quartile fall well below. However, Pretax Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Talbros Engineering's current Pretax Margin % of 9.02% is 103.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Pretax Margin % mean?
A high Pretax Margin % can signal that a stock is expensive relative to its fundamentals. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Talbros Engineering and its competitors. For the Vehicles & Parts industry, the median Pretax Margin % is 4.43 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Talbros Engineering's current Pretax Margin % is 9.02%, which is 42% above median its own 10-year median of 6.33. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Talbros Engineering stock overvalued right now?
Based on GuruFocus' analysis, Talbros Engineering (BOM:538987) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹788.97, compared to a current price of ₹699.45 — trading 11.3% below its estimated fair value. The current Pretax Margin % is 9.02%, which is 42% above median its 10-year median of 6.33 and 103.8% above the Vehicles & Parts industry median of 4.43. Talbros Engineering's overall GF Score™ is 87/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Pretax Margin % calculated?
Pretax Margin % is calculated from a company's financial statements. For Talbros Engineering (BOM:538987), the current Pretax Margin % is 9.02% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Talbros Engineering (BOM:538987) Overvalued in 2026?
Based on GuruFocus' analysis, Talbros Engineering stock appears to be undervalued.
The current stock price of ₹699.45 is trading 11.3% below its estimated GF Value™ of ₹788.97.
GuruFocus considers Talbros Engineering to be Modestly Undervalued.
Key valuation signals for BOM:538987:
Pretax Margin %: 9.02% (42% above median its 10-year median of 6.33)
GF Value™: ₹788.97 vs. price of ₹699.45 (11.3% below fair value)
Industry Position: 103.8% above the Vehicles & Parts median (#438 of 1322)
No single metric tells the full story. See the BOM:538987 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Talbros Engineering Ltd is engaged in manufacturing of Rear Axle Shafts for automobile companies in India and foreign markets. The company operates in only one Segment namely Automobile Components. It offers Rear axle shafts, light axle shafts, medium axle shafts, heavy axle shafts, tandem axle shafts and Front axle shafts. Its manufacturing facilities include forging and induction hardening. The group sells its products in India and also exports it to other countries. It derives a majority of its revenue from India.
87GF Score
Get the complete analysis for BOM:538987
Pretax Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:538987 has been successfully added to your 
