Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Talbros EngineeringBOM:538987 +2.62%89 5-Year Yield-on-Cost % is 0.41 as of Sep. 02, 2026, which is 7% below its 10-year median of 0.44. GuruFocus rates BOM:538987 with a GF Score™ of 89/100 and a GF Value™ of ₹768.46 (Modestly Undervalued). The stock has 2 warning signs investors should review. Among 843 Vehicles & Parts companies, Talbros Engineering ranks worse than 90.98% on this metric.
Talbros Engineering's yield on cost for the quarter that ended in Jun. 2026 was 0.41.
The historical rank and industry rank for Talbros Engineering's 5-Year Yield-on-Cost % or its related term are showing as below:
BOM:538987'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.24 Med: 0.44 Max: 2.9
Current: 0.41
During the past 13 years, Talbros Engineering's highest Yield on Cost was 2.90. The lowest was 0.24. And the median was 0.44.
BOM:538987's 5-Year Yield-on-Cost % is ranked worse than 90.98% of 843
companies
in the Vehicles & Parts industry
Industry Median: 3.17
vs BOM:538987: 0.41
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Talbros Engineering 5-Year Yield-on-Cost % Related Terms
BOM:538987 vs ORLY, AZO, GPC: 5-Year Yield-on-Cost % Comparison
For the Auto Parts subindustry, Talbros Engineering's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Talbros Engineering 5-Year Yield-on-Cost % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Talbros Engineering's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Talbros Engineering's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Talbros Engineering (BOM:538987) has a 5-Year Yield-on-Cost % of 0.41 as of Sep. 02, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Talbros Engineering and its competitors. This is near median its historical median of 0.44. Over the past decade, Talbros Engineering's 5-Year Yield-on-Cost % has ranged from 0.24 to 2.90. According to the industry distribution chart, Talbros Engineering ranks #767 out of 843 companies in the Vehicles & Parts industry, placing it in the top 91%.
Is Talbros Engineering's 5-Year Yield-on-Cost % too high?
Talbros Engineering's current 5-Year Yield-on-Cost % of 0.41 is near median its 10-year median of 0.44. Over the past 10 years, this metric has ranged from a low of 0.24 to a high of 2.90. The Vehicles & Parts industry median 5-Year Yield-on-Cost % is 3.17. Talbros Engineering's value of 0.41 is 87.1% below this industry median. Based on the distribution chart, Talbros Engineering ranks #767 out of 843 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Talbros Engineering has a GF Score™ of 89/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Talbros Engineering's 5-Year Yield-on-Cost % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Talbros Engineering ranks #767 out of 843 companies for 5-Year Yield-on-Cost %. This places Talbros Engineering in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.17. Talbros Engineering's value of 0.41 is 87.1% below this benchmark. Historically, Talbros Engineering's own 5-Year Yield-on-Cost % has ranged from 0.24 to 2.90 over the past decade. While the company's 10-year median is 0.44 vs. the industry median of 3.17, Talbros Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Vehicles & Parts company?
The median 5-Year Yield-on-Cost % among Vehicles & Parts companies is 3.17, based on 843 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Talbros Engineering's current 5-Year Yield-on-Cost % of 0.41 is 87.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Talbros Engineering and its competitors. For the Vehicles & Parts industry, the median 5-Year Yield-on-Cost % is 3.17 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Talbros Engineering's current 5-Year Yield-on-Cost % is 0.41, which is near median its own 10-year median of 0.44. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Talbros Engineering stock overvalued right now?
Based on GuruFocus' analysis, Talbros Engineering (BOM:538987) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹768.46, compared to a current price of ₹631.60 — trading 17.8% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.41, which is near median its 10-year median of 0.44 and 87.1% below the Vehicles & Parts industry median of 3.17. Talbros Engineering's overall GF Score™ is 89/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Talbros Engineering (BOM:538987), the current 5-Year Yield-on-Cost % is 0.41 as of Sep. 02, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Talbros Engineering (BOM:538987) Overvalued in 2026?
Based on GuruFocus' analysis, Talbros Engineering stock appears to be undervalued.
The current stock price of ₹631.60 is trading 17.8% below its estimated GF Value™ of ₹768.46.
GuruFocus considers Talbros Engineering to be Modestly Undervalued.
Key valuation signals for BOM:538987:
5-Year Yield-on-Cost %: 0.41 (near median its 10-year median of 0.44)
GF Value™: ₹768.46 vs. price of ₹631.60 (17.8% below fair value)
Industry Position: 87.1% below the Vehicles & Parts median (#767 of 843)
No single metric tells the full story. See the BOM:538987 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Talbros Engineering Ltd is engaged in manufacturing of Rear Axle Shafts for automobile companies in India and foreign markets. The company operates in only one Segment namely Automobile Components. It offers Rear axle shafts, light axle shafts, medium axle shafts, heavy axle shafts, tandem axle shafts and Front axle shafts. Its manufacturing facilities include forging and induction hardening. The group sells its products in India and also exports it to other countries. It derives a majority of its revenue from India.
89GF Score
Get the complete analysis for BOM:538987
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:538987 has been successfully added to your 
