Talbros EngineeringBOM:538987 +1.12%85 ROA % is 10.01% as of Mar. 2026, which is 42% above its 10-year median of 7.04. GuruFocus rates BOM:538987 with a GF Score™ of 85/100 and a GF Value™ of ₹787.65 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 1,335 Vehicles & Parts companies, Talbros Engineering ranks better than 83.3% on this metric.
ROA % is calculated as Net Income divided by its average Total Assets over a certain period of time. Talbros Engineering's annualizedNet Income for the quarter that ended in Mar. 2026 was ₹382 Mil.
Talbros Engineering's average Total Assets over the quarter that ended in Mar. 2026 was ₹3,816 Mil. Therefore, Talbros Engineering's annualized ROA % for the quarter that ended in Mar. 2026 was 10.01%.
The historical rank and industry rank for Talbros Engineering's ROA % or its related term are showing as below:
BOM:538987'
s ROA % Range Over the Past 10 Years
Min: 2.32 Med: 7.04 Max: 10.71
Current: 8.2
During the past 13 years, Talbros Engineering's highest ROA % was 10.71%. The lowest was 2.32%. And the median was 7.04%.
BOM:538987's ROA % is ranked better than 83.3% of 1335
companies
in the Vehicles & Parts industry
Industry Median: 2.95
vs BOM:538987: 8.20
ROA % measures the rate of return on the total assets (shareholder equity plus liabilities). It measures a firm's efficiency at generating profits from shareholders' equity plus its liabilities. ROA % shows how well a company uses what it has to generate earnings. ROA %s can vary drastically across industries. Therefore, ROA % should not be used to compare companies in different industries. For retailers, a ROA % of higher than 5% is expected. For example, Wal-Mart (WMT) has a ROA % of about 8% as of 2012. For banks, ROA % is close to their interest spread. A banks ROA % is typically well under 2%.
Similar to ROE, ROA % is affected by profit margins and asset turnover. This can be seen from the Du Pont Formula:
Note:
The Net Income data used here is four times the quarterly (Mar. 2026) net income data. The Revenue data used here is four times the quarterly (Mar. 2026) revenue data.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Like ROE, ROA % is calculated with only 12 months data. Fluctuations in the company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. ROA % can be affected by events such as stock buyback or issuance, and by goodwill, a company's tax rate and its interest payment. ROA % may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high ROA % may indicate vulnerability in the durability of the competitive advantage.
E.g. Raising $43b to take on KO is impossible, but $1.7b to take on Moody's is. Although Moody's ROA % and underlying economics is far superior to Coca Cola, the durability is far weaker because of lower entry cost.
Talbros Engineering ROA % Related Terms
Talbros Engineering ROA % Historical Data
* Premium members only.
The historical data trend for Talbros Engineering's ROA % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Talbros Engineering's ROA %, along with its competitors' market caps and ROA % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Talbros Engineering ROA % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Talbros Engineering's ROA % distribution charts can be found below:
* The bar in red indicates where Talbros Engineering's ROA % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual ROA %, the net income of the last fiscal year and the average total assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is four times the quarterly (Mar. 2026) net income data.
ROA % is displayed in the 30-year financial page.
Talbros Engineering (BOM:538987) has a ROA % of 10.01% as of Mar. 2026. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Talbros Engineering and its competitors. This is 42% above median its historical median of 7.04. Over the past decade, Talbros Engineering's ROA % has ranged from 2.32 to 10.71. According to the industry distribution chart, Talbros Engineering ranks #223 out of 1335 companies in the Vehicles & Parts industry, placing it in the top 16.7%.
Is Talbros Engineering's ROA % too high?
Talbros Engineering's current ROA % of 10.01% is 42% above median its 10-year median of 7.04. Over the past 10 years, this metric has ranged from a low of 2.32 to a high of 10.71. The Vehicles & Parts industry median ROA % is 2.95. Talbros Engineering's value of 10.01% is 239.3% above this industry median. Based on the distribution chart, Talbros Engineering ranks #223 out of 1335 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, Talbros Engineering has a GF Score™ of 85/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Talbros Engineering's ROA % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Talbros Engineering ranks #223 out of 1335 companies for ROA %. This places Talbros Engineering in the top 17% of its industry — outperforming the majority of peers. The industry median ROA % is 2.95. Talbros Engineering's value of 10.01% is 239.3% above this benchmark. Historically, Talbros Engineering's own ROA % has ranged from 2.32 to 10.71 over the past decade. While the company's 10-year median is 7.04 vs. the industry median of 2.95, Talbros Engineering has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROA % for a Vehicles & Parts company?
The median ROA % among Vehicles & Parts companies is 2.95, based on 1,335 companies in the industry. Companies in the top quartile (top 25%) have a ROA % significantly above this median, while those in the bottom quartile fall well below. However, ROA % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Talbros Engineering's current ROA % of 10.01% is 239.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROA % mean?
A high ROA % can signal that a stock is expensive relative to its fundamentals. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Talbros Engineering and its competitors. For the Vehicles & Parts industry, the median ROA % is 2.95 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Talbros Engineering's current ROA % is 10.01%, which is 42% above median its own 10-year median of 7.04. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Talbros Engineering stock overvalued right now?
Based on GuruFocus' analysis, Talbros Engineering (BOM:538987) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹787.65, compared to a current price of ₹710.25 — trading 9.8% below its estimated fair value. The current ROA % is 10.01%, which is 42% above median its 10-year median of 7.04 and 239.3% above the Vehicles & Parts industry median of 2.95. Talbros Engineering's overall GF Score™ is 85/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROA % calculated?
ROA % is calculated from a company's financial statements. For Talbros Engineering (BOM:538987), the current ROA % is 10.01% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Talbros Engineering (BOM:538987) Overvalued in 2026?
Based on GuruFocus' analysis, Talbros Engineering stock appears to be undervalued.
The current stock price of ₹710.25 is trading 9.8% below its estimated GF Value™ of ₹787.65.
GuruFocus considers Talbros Engineering to be Modestly Undervalued.
Key valuation signals for BOM:538987:
ROA %: 10.01% (42% above median its 10-year median of 7.04)
GF Value™: ₹787.65 vs. price of ₹710.25 (9.8% below fair value)
Industry Position: 239.3% above the Vehicles & Parts median (#223 of 1335)
No single metric tells the full story. See the BOM:538987 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Talbros Engineering Ltd is engaged in manufacturing of Rear Axle Shafts for automobile companies in India and foreign markets. The company operates in only one Segment namely Automobile Components. It offers Rear axle shafts, light axle shafts, medium axle shafts, heavy axle shafts, tandem axle shafts and Front axle shafts. Its manufacturing facilities include forging and induction hardening. The group sells its products in India and also exports it to other countries. It derives a majority of its revenue from India.
85GF Score
Get the complete analysis for BOM:538987
ROA % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:538987 has been successfully added to your 
