Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
K.W. Metal Work PCLBKK:KWM -1.10%54 5-Year Yield-on-Cost % is 3.19 as of Aug. 05, 2026, which is 29% below its 10-year median of 4.49. GuruFocus rates BKK:KWM with a GF Score™ of 54/100 and a GF Value™ of ฿0.86 (Fairly Valued). The stock has 10 warning signs investors should review. Among 137 Farm & Heavy Construction Machinery companies, K.W. Metal Work PCL ranks better than 54.74% on this metric.
K.W. Metal Work PCL's yield on cost for the quarter that ended in Mar. 2026 was 3.19.
The historical rank and industry rank for K.W. Metal Work PCL's 5-Year Yield-on-Cost % or its related term are showing as below:
BKK:KWM'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.87 Med: 4.49 Max: 8.6
Current: 3.19
During the past 11 years, K.W. Metal Work PCL's highest Yield on Cost was 8.60. The lowest was 0.87. And the median was 4.49.
BKK:KWM's 5-Year Yield-on-Cost % is ranked better than 54.74% of 137
companies
in the Farm & Heavy Construction Machinery industry
Industry Median: 2.81
vs BKK:KWM: 3.19
K.W. Metal Work PCL (BKK:KWM) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
K.W. Metal Work PCL 5-Year Yield-on-Cost % Related Terms
BKK:KWM vs CAT, DE, PCAR: 5-Year Yield-on-Cost % Comparison
For the Farm & Heavy Construction Machinery subindustry, K.W. Metal Work PCL's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
K.W. Metal Work PCL 5-Year Yield-on-Cost % vs Farm & Heavy Construction Machinery Industry
For the Farm & Heavy Construction Machinery industry and Industrials sector, K.W. Metal Work PCL's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where K.W. Metal Work PCL's 5-Year Yield-on-Cost % falls into.
K.W. Metal Work PCL 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
K.W. Metal Work PCL (BKK:KWM) has a 5-Year Yield-on-Cost % of 3.19 as of Aug. 05, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on K.W. Metal Work PCL and its competitors. This is 29% below median its historical median of 4.49. Over the past decade, K.W. Metal Work PCL's 5-Year Yield-on-Cost % has ranged from 0.87 to 8.60. According to the industry distribution chart, K.W. Metal Work PCL ranks #62 out of 137 companies in the Farm & Heavy Construction Machinery industry, placing it in the top 45.3%.
Is K.W. Metal Work PCL's 5-Year Yield-on-Cost % too high?
K.W. Metal Work PCL's current 5-Year Yield-on-Cost % of 3.19 is 29% below median its 10-year median of 4.49. Over the past 10 years, this metric has ranged from a low of 0.87 to a high of 8.60. The Farm & Heavy Construction Machinery industry median 5-Year Yield-on-Cost % is 2.81. K.W. Metal Work PCL's value of 3.19 is 13.5% above this industry median. Based on the distribution chart, K.W. Metal Work PCL ranks #62 out of 137 companies in the Farm & Heavy Construction Machinery industry, which is above the industry midpoint. Overall, K.W. Metal Work PCL has a GF Score™ of 54/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does K.W. Metal Work PCL's 5-Year Yield-on-Cost % compare to CAT and DE?
According to the Farm & Heavy Construction Machinery industry distribution chart, K.W. Metal Work PCL ranks #62 out of 137 companies for 5-Year Yield-on-Cost %. This puts K.W. Metal Work PCL in the upper half of its industry. The industry median 5-Year Yield-on-Cost % is 2.81. K.W. Metal Work PCL's value of 3.19 is 13.5% above this benchmark. Historically, K.W. Metal Work PCL's own 5-Year Yield-on-Cost % has ranged from 0.87 to 8.60 over the past decade. While the company's 10-year median is 4.49 vs. the industry median of 2.81, K.W. Metal Work PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Farm & Heavy Construction Machinery company?
The median 5-Year Yield-on-Cost % among Farm & Heavy Construction Machinery companies is 2.81, based on 137 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. K.W. Metal Work PCL's current 5-Year Yield-on-Cost % of 3.19 is 13.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on K.W. Metal Work PCL and its competitors. For the Farm & Heavy Construction Machinery industry, the median 5-Year Yield-on-Cost % is 2.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. K.W. Metal Work PCL's current 5-Year Yield-on-Cost % is 3.19, which is 29% below median its own 10-year median of 4.49. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is K.W. Metal Work PCL stock overvalued right now?
Based on GuruFocus' analysis, K.W. Metal Work PCL (BKK:KWM) is currently considered Fairly Valued. The stock's GF Value™ is ฿0.86, compared to a current price of ฿0.90 — trading 4.7% above its estimated fair value. The current 5-Year Yield-on-Cost % is 3.19, which is 29% below median its 10-year median of 4.49 and 13.5% above the Farm & Heavy Construction Machinery industry median of 2.81. K.W. Metal Work PCL's overall GF Score™ is 54/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For K.W. Metal Work PCL (BKK:KWM), the current 5-Year Yield-on-Cost % is 3.19 as of Aug. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is K.W. Metal Work PCL (BKK:KWM) Overvalued in 2026?
Based on GuruFocus' analysis, K.W. Metal Work PCL stock appears to be overvalued.
The current stock price of ฿0.90 is trading 4.7% above its estimated GF Value™ of ฿0.86.
GuruFocus considers K.W. Metal Work PCL to be Fairly Valued.
Key valuation signals for BKK:KWM:
5-Year Yield-on-Cost %: 3.19 (29% below median its 10-year median of 4.49)
GF Value™: ฿0.86 vs. price of ฿0.90 (4.7% above fair value)
Industry Position: 13.5% above the Farm & Heavy Construction Machinery median (#62 of 137)
No single metric tells the full story. See the BKK:KWM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
K.W. Metal Work PCL is engaged in the manufacturing and sales of parts and accessories for farm machinery. It manufactures and distributes agricultural equipment such as Blade, Screw Flight, Rotary Blade, Dozer blades, and others. It has two operating segments; Sales of parts and accessories for farm machinery, Letting of equipment for extraction of a substance from Hemp and Marijuana; and Sales of substances extracted and raw materials processed from agricultural plants, and sales of products from herbal. Key revenue is earned from the sales of parts and accessories for farm machinery.
54GF Score
Get the complete analysis for BKK:KWM
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:KWM has been successfully added to your 
