Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Avic Heavy Machinery CoSHSE:600765 -0.59%69 5-Year Yield-on-Cost % is 0.37 as of Aug. 06, 2026, which is 86% below its 10-year median of 2.67. GuruFocus rates SHSE:600765 with a GF Score™ of 69/100 and a GF Value™ of ¥17.28 (Modestly Undervalued). The stock has 10 warning signs investors should review. Among 1,906 Industrial Products companies, Avic Heavy Machinery Co ranks worse than 86.36% on this metric.
The historical rank and industry rank for Avic Heavy Machinery Co's 5-Year Yield-on-Cost % or its related term are showing as below:
SHSE:600765'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.37 Med: 2.67 Max: 11.12
Current: 0.37
During the past 13 years, Avic Heavy Machinery Co's highest Yield on Cost was 11.12. The lowest was 0.37. And the median was 2.67.
SHSE:600765's 5-Year Yield-on-Cost % is ranked worse than 86.36% of 1906
companies
in the Industrial Products industry
Industry Median: 1.94
vs SHSE:600765: 0.37
Avic Heavy Machinery Co (SHSE:600765) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Avic Heavy Machinery Co 5-Year Yield-on-Cost % Related Terms
SHSE:600765 vs GEV, ETN, PH: 5-Year Yield-on-Cost % Comparison
For the Specialty Industrial Machinery subindustry, Avic Heavy Machinery Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Avic Heavy Machinery Co 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Avic Heavy Machinery Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Avic Heavy Machinery Co's 5-Year Yield-on-Cost % falls into.
Avic Heavy Machinery Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Avic Heavy Machinery Co (SHSE:600765) has a 5-Year Yield-on-Cost % of 0.37 as of Aug. 06, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Avic Heavy Machinery Co and its competitors. This is 86% below median its historical median of 2.67. Over the past decade, Avic Heavy Machinery Co's 5-Year Yield-on-Cost % has ranged from 0.37 to 11.12. According to the industry distribution chart, Avic Heavy Machinery Co ranks #1646 out of 1906 companies in the Industrial Products industry, placing it in the top 86.4%.
Is Avic Heavy Machinery Co's 5-Year Yield-on-Cost % too high?
Avic Heavy Machinery Co's current 5-Year Yield-on-Cost % of 0.37 is 86% below median its 10-year median of 2.67. Over the past 10 years, this metric has ranged from a low of 0.37 to a high of 11.12. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.94. Avic Heavy Machinery Co's value of 0.37 is 80.9% below this industry median. Based on the distribution chart, Avic Heavy Machinery Co ranks #1646 out of 1906 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Avic Heavy Machinery Co has a GF Score™ of 69/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Avic Heavy Machinery Co's 5-Year Yield-on-Cost % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Avic Heavy Machinery Co ranks #1646 out of 1906 companies for 5-Year Yield-on-Cost %. This places Avic Heavy Machinery Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 1.94. Avic Heavy Machinery Co's value of 0.37 is 80.9% below this benchmark. Historically, Avic Heavy Machinery Co's own 5-Year Yield-on-Cost % has ranged from 0.37 to 11.12 over the past decade. While the company's 10-year median is 2.67 vs. the industry median of 1.94, Avic Heavy Machinery Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.94, based on 1,906 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Avic Heavy Machinery Co's current 5-Year Yield-on-Cost % of 0.37 is 80.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Avic Heavy Machinery Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.94 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Avic Heavy Machinery Co's current 5-Year Yield-on-Cost % is 0.37, which is 86% below median its own 10-year median of 2.67. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Avic Heavy Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Avic Heavy Machinery Co (SHSE:600765) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥17.28, compared to a current price of ¥13.47 — trading 22% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.37, which is 86% below median its 10-year median of 2.67 and 80.9% below the Industrial Products industry median of 1.94. Avic Heavy Machinery Co's overall GF Score™ is 69/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Avic Heavy Machinery Co (SHSE:600765), the current 5-Year Yield-on-Cost % is 0.37 as of Aug. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Avic Heavy Machinery Co (SHSE:600765) Overvalued in 2026?
Based on GuruFocus' analysis, Avic Heavy Machinery Co stock appears to be undervalued.
The current stock price of ¥13.47 is trading 22% below its estimated GF Value™ of ¥17.28.
GuruFocus considers Avic Heavy Machinery Co to be Modestly Undervalued.
Key valuation signals for SHSE:600765:
5-Year Yield-on-Cost %: 0.37 (86% below median its 10-year median of 2.67)
GF Value™: ¥17.28 vs. price of ¥13.47 (22% below fair value)
Industry Position: 80.9% below the Industrial Products median (#1646 of 1906)
No single metric tells the full story. See the SHSE:600765 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Avic Heavy Machinery Co Ltd is a China-based company engaged in the development, production, and sale of both military and civilian-used high-end equipment. It manufactures hydraulic parts, hydraulic systems, forging products, heat exchangers and gas turbines in China. The company operates in the business areas of Forging business, Hydraulic business, and New energy business. In the Forging business, the company mainly produces die forgings, free forgings, isothermal forgings and rings of different materials. In Hydraulic business, the main products are various types of heat exchangers, high-speed rotating machinery (turbine, pumps, fans), oil tanks, cooling devices, high-temperature insulation components.
69GF Score
Get the complete analysis for SHSE:600765
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:600765 has been successfully added to your 
