Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Avic Heavy Machinery CoSHSE:600765 +0.23%67 PEG Ratio is 6.34 as of Jul. 14, 2026, which is 554% above its 10-year median of 0.97. GuruFocus rates SHSE:600765 with a GF Score™ of 67/100 and a GF Value™ of ¥17.12 (Modestly Undervalued). The stock has 10 warning signs investors should review. Among 1,276 Industrial Products companies, Avic Heavy Machinery Co ranks worse than 82.29% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Avic Heavy Machinery Co's PEG Ratio or its related term are showing as below:
SHSE:600765'
s PEG Ratio Range Over the Past 10 Years
Min: 0.47 Med: 0.97 Max: 12.06
Current: 6.34
During the past 13 years, Avic Heavy Machinery Co's highest PEG Ratio was 12.06. The lowest was 0.47. And the median was 0.97.
SHSE:600765's PEG Ratio is ranked worse than 82.29% of 1276
companies
in the Industrial Products industry
Industry Median: 1.79
vs SHSE:600765: 6.34
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Avic Heavy Machinery Co (SHSE:600765) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Avic Heavy Machinery Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Avic Heavy Machinery Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Avic Heavy Machinery Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Avic Heavy Machinery Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Avic Heavy Machinery Co (SHSE:600765) has a PEG Ratio of 6.34 as of Jul. 14, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Avic Heavy Machinery Co and its competitors. This is 554% above median its historical median of 0.97. Over the past decade, Avic Heavy Machinery Co's PEG Ratio has ranged from 0.47 to 12.06. According to the industry distribution chart, Avic Heavy Machinery Co ranks #1050 out of 1276 companies in the Industrial Products industry, placing it in the top 82.3%.
Is Avic Heavy Machinery Co's PEG Ratio too high?
Avic Heavy Machinery Co's current PEG Ratio of 6.34 is 554% above median its 10-year median of 0.97. Over the past 10 years, this metric has ranged from a low of 0.47 to a high of 12.06. The Industrial Products industry median PEG Ratio is 1.79. Avic Heavy Machinery Co's value of 6.34 is 254.2% above this industry median. Based on the distribution chart, Avic Heavy Machinery Co ranks #1050 out of 1276 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Avic Heavy Machinery Co has a GF Score™ of 67/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Avic Heavy Machinery Co's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Avic Heavy Machinery Co ranks #1050 out of 1276 companies for PEG Ratio. This places Avic Heavy Machinery Co in the lower half of its industry. The industry median PEG Ratio is 1.79. Avic Heavy Machinery Co's value of 6.34 is 254.2% above this benchmark. Historically, Avic Heavy Machinery Co's own PEG Ratio has ranged from 0.47 to 12.06 over the past decade. While the company's 10-year median is 0.97 vs. the industry median of 1.79, Avic Heavy Machinery Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.79, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Avic Heavy Machinery Co's current PEG Ratio of 6.34 is 254.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Avic Heavy Machinery Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.79 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Avic Heavy Machinery Co's current PEG Ratio is 6.34, which is 554% above median its own 10-year median of 0.97. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Avic Heavy Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Avic Heavy Machinery Co (SHSE:600765) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥17.12, compared to a current price of ¥12.86 — trading 24.9% below its estimated fair value. The current PEG Ratio is 6.34, which is 554% above median its 10-year median of 0.97 and 254.2% above the Industrial Products industry median of 1.79. Avic Heavy Machinery Co's overall GF Score™ is 67/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Avic Heavy Machinery Co (SHSE:600765), the current PEG Ratio is 6.34 as of Jul. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Avic Heavy Machinery Co (SHSE:600765) Overvalued in 2026?
Based on GuruFocus' analysis, Avic Heavy Machinery Co stock appears to be undervalued.
The current stock price of ¥12.86 is trading 24.9% below its estimated GF Value™ of ¥17.12.
GuruFocus considers Avic Heavy Machinery Co to be Modestly Undervalued.
Key valuation signals for SHSE:600765:
PEG Ratio: 6.34 (554% above median its 10-year median of 0.97)
GF Value™: ¥17.12 vs. price of ¥12.86 (24.9% below fair value)
Industry Position: 254.2% above the Industrial Products median (#1050 of 1276)
No single metric tells the full story. See the SHSE:600765 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Avic Heavy Machinery Co Ltd is a China-based company engaged in the development, production, and sale of both military and civilian-used high-end equipment. It manufactures hydraulic parts, hydraulic systems, forging products, heat exchangers and gas turbines in China. The company operates in the business areas of Forging business, Hydraulic business, and New energy business. In the Forging business, the company mainly produces die forgings, free forgings, isothermal forgings and rings of different materials. In Hydraulic business, the main products are various types of heat exchangers, high-speed rotating machinery (turbine, pumps, fans), oil tanks, cooling devices, high-temperature insulation components.
67GF Score
Get the complete analysis for SHSE:600765
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:600765 has been successfully added to your 
