Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Takakita CoTSE:6325 59 5-Year Yield-on-Cost % is 2.65 as of Jul. 22, 2026, which is 37% above its 10-year median of 1.93. GuruFocus rates TSE:6325 with a GF Score™ of 59/100 and a GF Value™ of 円370.95 (Fairly Valued). The stock has 4 warning signs investors should review. Among 138 Farm & Heavy Construction Machinery companies, Takakita Co ranks worse than 53.62% on this metric.
Takakita Co's yield on cost for the quarter that ended in Mar. 2026 was 2.65.
The historical rank and industry rank for Takakita Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TSE:6325'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.86 Med: 1.93 Max: 4.39
Current: 2.65
During the past 13 years, Takakita Co's highest Yield on Cost was 4.39. The lowest was 0.86. And the median was 1.93.
TSE:6325's 5-Year Yield-on-Cost % is ranked worse than 53.62% of 138
companies
in the Farm & Heavy Construction Machinery industry
Industry Median: 2.805
vs TSE:6325: 2.65
Takakita Co (TSE:6325) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Takakita Co 5-Year Yield-on-Cost % Related Terms
TSE:6325 vs CAT, DE, PCAR: 5-Year Yield-on-Cost % Comparison
For the Farm & Heavy Construction Machinery subindustry, Takakita Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Takakita Co 5-Year Yield-on-Cost % vs Farm & Heavy Construction Machinery Industry
For the Farm & Heavy Construction Machinery industry and Industrials sector, Takakita Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Takakita Co's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of Takakita Co is calculated as
Takakita Co (TSE:6325) has a 5-Year Yield-on-Cost % of 2.65 as of Jul. 22, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Takakita Co and its competitors. This is 37% above median its historical median of 1.93. Over the past decade, Takakita Co's 5-Year Yield-on-Cost % has ranged from 0.86 to 4.39. According to the industry distribution chart, Takakita Co ranks #74 out of 138 companies in the Farm & Heavy Construction Machinery industry, placing it in the top 53.6%.
Is Takakita Co's 5-Year Yield-on-Cost % too high?
Takakita Co's current 5-Year Yield-on-Cost % of 2.65 is 37% above median its 10-year median of 1.93. Over the past 10 years, this metric has ranged from a low of 0.86 to a high of 4.39. The Farm & Heavy Construction Machinery industry median 5-Year Yield-on-Cost % is 2.81. Takakita Co's value of 2.65 is 5.5% below this industry median. Based on the distribution chart, Takakita Co ranks #74 out of 138 companies in the Farm & Heavy Construction Machinery industry, which is below the industry midpoint. Overall, Takakita Co has a GF Score™ of 59/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Takakita Co's 5-Year Yield-on-Cost % compare to CAT and DE?
According to the Farm & Heavy Construction Machinery industry distribution chart, Takakita Co ranks #74 out of 138 companies for 5-Year Yield-on-Cost %. This places Takakita Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 2.81. Takakita Co's value of 2.65 is 5.5% below this benchmark. Historically, Takakita Co's own 5-Year Yield-on-Cost % has ranged from 0.86 to 4.39 over the past decade. While the company's 10-year median is 1.93 vs. the industry median of 2.81, Takakita Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Farm & Heavy Construction Machinery company?
The median 5-Year Yield-on-Cost % among Farm & Heavy Construction Machinery companies is 2.81, based on 138 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Takakita Co's current 5-Year Yield-on-Cost % of 2.65 is 5.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Takakita Co and its competitors. For the Farm & Heavy Construction Machinery industry, the median 5-Year Yield-on-Cost % is 2.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Takakita Co's current 5-Year Yield-on-Cost % is 2.65, which is 37% above median its own 10-year median of 1.93. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Takakita Co stock overvalued right now?
Based on GuruFocus' analysis, Takakita Co (TSE:6325) is currently considered Fairly Valued. The stock's GF Value™ is 円370.95, compared to a current price of 円403.00 — trading 8.6% above its estimated fair value. The current 5-Year Yield-on-Cost % is 2.65, which is 37% above median its 10-year median of 1.93 and 5.5% below the Farm & Heavy Construction Machinery industry median of 2.81. Takakita Co's overall GF Score™ is 59/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Takakita Co (TSE:6325), the current 5-Year Yield-on-Cost % is 2.65 as of Jul. 22, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Takakita Co (TSE:6325) Overvalued in 2026?
Based on GuruFocus' analysis, Takakita Co stock appears to be overvalued.
The current stock price of 円403.00 is trading 8.6% above its estimated GF Value™ of 円370.95.
GuruFocus considers Takakita Co to be Fairly Valued.
Key valuation signals for TSE:6325:
5-Year Yield-on-Cost %: 2.65 (37% above median its 10-year median of 1.93)
GF Value™: 円370.95 vs. price of 円403.00 (8.6% above fair value)
Industry Position: 5.5% below the Farm & Heavy Construction Machinery median (#74 of 138)
No single metric tells the full story. See the TSE:6325 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Takakita Co Ltd is engaged in manufacture and sale of agricultural machines. The products of the company include shredded packaging work machine, sowing work machine, reaping and reversing grass work machine, levelling work machine, and control and weeding machine.
59GF Score
Get the complete analysis for TSE:6325
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6325 has been successfully added to your 
