M.C.S. Steel PCLBKK:MCS 68 Dividend Yield % is 12.42% as of Jun. 26, 2026, which is 79% above its 10-year median of 6.94. GuruFocus rates BKK:MCS with a GF Score™ of 68/100 and a GF Value™ of ฿6.51 (Modestly Overvalued). The stock has 5 warning signs investors should review. Among 316 Steel companies, M.C.S. Steel PCL ranks better than 98.1% on this metric.
As of today (2026-06-26), the Trailing Annual Dividend Yield of M.C.S. Steel PCL is 12.42%.
Good Sign:
M.C.S. Steel PCL stock Dividend Yield % is close to 10-year high.
The historical rank and industry rank for M.C.S. Steel PCL's Dividend Yield % or its related term are showing as below:
BKK:MCS'
s Dividend Yield % Range Over the Past 10 Years
Min: 2.1 Med: 6.94 Max: 13.53
Current: 12.42
During the past 13 years, the highest Dividend Yield of M.C.S. Steel PCL was 13.53%. The lowest was 2.10%. And the median was 6.94%.
BKK:MCS's Dividend Yield % is ranked better than 98.1% of 316
companies
in the Steel industry
Industry Median: 2.745
vs BKK:MCS: 12.42
During the past 12 months, M.C.S. Steel PCL's average Dividends Per Share Growth Rate was 275.00% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 14.50% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was -11.20% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was -3.40% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of M.C.S. Steel PCL was 94.80% per year. The lowest was -43.30% per year. And the median was 3.80% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
The historical data trend for M.C.S. Steel PCL's Dividend Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:MCS vs NUE, STLD, RS: Dividend Yield % Comparison
For the Steel subindustry, M.C.S. Steel PCL's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
M.C.S. Steel PCL Dividend Yield % vs Steel Industry
For the Steel industry and Basic Materials sector, M.C.S. Steel PCL's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where M.C.S. Steel PCL's Dividend Yield % falls into.
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
M.C.S. Steel PCL Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
THB 0.700000
2026-04-20
2026-04-21
2026-05-07
Cash Dividend
semi-annually
THB:THB 1.000000
THB 0.250000
2025-08-26
2025-08-27
2025-09-10
Cash Dividend
semi-annually
THB:THB 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
M.C.S. Steel PCL's Trailing Annual Dividend Yield (%) for Today is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
M.C.S. Steel PCL (BKK:MCS) has a Dividend Yield % of 12.42% as of Jun. 26, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on M.C.S. Steel PCL and its competitors. This is 79% above median its historical median of 6.94. Over the past decade, M.C.S. Steel PCL's Dividend Yield % has ranged from 2.10 to 13.53. According to the industry distribution chart, M.C.S. Steel PCL ranks #6 out of 316 companies in the Steel industry, placing it in the top 1.9%.
Is M.C.S. Steel PCL's Dividend Yield % too high?
M.C.S. Steel PCL's current Dividend Yield % of 12.42% is 79% above median its 10-year median of 6.94. Over the past 10 years, this metric has ranged from a low of 2.10 to a high of 13.53. The Steel industry median Dividend Yield % is 2.75. M.C.S. Steel PCL's value of 12.42% is 352.5% above this industry median. Based on the distribution chart, M.C.S. Steel PCL ranks #6 out of 316 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, M.C.S. Steel PCL has a GF Score™ of 68/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does M.C.S. Steel PCL's Dividend Yield % compare to NUE and STLD?
According to the Steel industry distribution chart, M.C.S. Steel PCL ranks #6 out of 316 companies for Dividend Yield %. This places M.C.S. Steel PCL in the top 2% of its industry — outperforming the majority of peers. The industry median Dividend Yield % is 2.75. M.C.S. Steel PCL's value of 12.42% is 352.5% above this benchmark. Historically, M.C.S. Steel PCL's own Dividend Yield % has ranged from 2.10 to 13.53 over the past decade. While the company's 10-year median is 6.94 vs. the industry median of 2.75, M.C.S. Steel PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for a Steel company?
The median Dividend Yield % among Steel companies is 2.75, based on 316 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. M.C.S. Steel PCL's current Dividend Yield % of 12.42% is 352.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on M.C.S. Steel PCL and its competitors. For the Steel industry, the median Dividend Yield % is 2.75 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. M.C.S. Steel PCL's current Dividend Yield % is 12.42%, which is 79% above median its own 10-year median of 6.94. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is M.C.S. Steel PCL stock overvalued right now?
Based on GuruFocus' analysis, M.C.S. Steel PCL (BKK:MCS) is currently considered Modestly Overvalued. The stock's GF Value™ is ฿6.51, compared to a current price of ฿7.65 — trading 17.5% above its estimated fair value. The current Dividend Yield % is 12.42%, which is 79% above median its 10-year median of 6.94 and 352.5% above the Steel industry median of 2.75. M.C.S. Steel PCL's overall GF Score™ is 68/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For M.C.S. Steel PCL (BKK:MCS), the current Dividend Yield % is 12.42% as of Jun. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is M.C.S. Steel PCL (BKK:MCS) Overvalued in 2026?
Based on GuruFocus' analysis, M.C.S. Steel PCL stock appears to be overvalued.
The current stock price of ฿7.65 is trading 17.5% above its estimated GF Value™ of ฿6.51.
GuruFocus considers M.C.S. Steel PCL to be Modestly Overvalued.
Key valuation signals for BKK:MCS:
Dividend Yield %: 12.42% (79% above median its 10-year median of 6.94)
GF Value™: ฿6.51 vs. price of ฿7.65 (17.5% above fair value)
Industry Position: 352.5% above the Steel median (#6 of 316)
No single metric tells the full story. See the BKK:MCS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
M.C.S. Steel PCL is engaged in the production and distribution of structural steel products for building construction and residential development projects for sale. It provides and exports steel structure works for various projects. The company's services include engineering design, parts, and quality control. The company's product and services portfolio includes Fabrication and sale of structural steel of which substantial income is earned, Fabrication including installation of structural steel, and Rendering of services. The business operates in three geographical segments: Thailand, Japan, and China. Key revenue is earned from domestic sales.
68GF Score
Get the complete analysis for BKK:MCS
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:MCS has been successfully added to your 
