M.C.S. Steel PCLBKK:MCS 68 Altman Z2-Score is 10.29 as of Jun. 27, 2026, which is 31% above its 10-year median of 7.88. GuruFocus rates BKK:MCS with a GF Score™ of 68/100 and a GF Value™ of ฿6.51 (Modestly Overvalued). The stock has 5 warning signs investors should review. Among 632 Steel companies, M.C.S. Steel PCL ranks better than 87.5% on this metric.
Altman Z2-Score, also known as Z"-Score, is used to predict the likelihood that a non-manufacturing company (excluding property/financial company) will face bankruptcy within a two-year period.
Good Sign:
M.C.S. Steel PCL has a Altman Z2-Score of 10.29, indicating it is in Safe Zones. This implies the Altman Z2-Score is strong.
The zones of discrimination were as such:
When Altman Z2-Score <= 1.1, it is in Distress Zones.
When Altman Z2-Score >= 2.6, it is in Safe Zones.
When Altman Z2-Score is between 1.1 and 2.6, it is in Grey Zones.
The historical rank and industry rank for M.C.S. Steel PCL's Altman Z2-Score or its related term are showing as below:
BKK:MCS'
s Altman Z2-Score Range Over the Past 10 Years
Min: 5.71 Med: 7.88 Max: 10.78
Current: 10.29
During the past 13 years, M.C.S. Steel PCL's highest Altman Z2-Score was 10.78. The lowest was 5.71. And the median was 7.88.
The original Z-Score model was based on publicly traded manufacturing companies while the Z2-Score, also known as Z"-score can be used for any type of company excluding property/financial companies. Both Z-Score and Z2-Score describes the financial health of a company, and its likelihood of financial distress.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
Altman Z2-Score does not apply to financial companies.
M.C.S. Steel PCL Altman Z2-Score Related Terms
M.C.S. Steel PCL Altman Z2-Score Historical Data
* Premium members only.
The historical data trend for M.C.S. Steel PCL's Altman Z2-Score can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:MCS vs NUE, STLD, RS: Altman Z2-Score Comparison
For the Steel subindustry, M.C.S. Steel PCL's Altman Z2-Score, along with its competitors' market caps and Altman Z2-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
M.C.S. Steel PCL Altman Z2-Score vs Steel Industry
For the Steel industry and Basic Materials sector, M.C.S. Steel PCL's Altman Z2-Score distribution charts can be found below:
* The bar in red indicates where M.C.S. Steel PCL's Altman Z2-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
Z2-Score, also known as Z"-Score is the Z-Score for non-manufacturing companies excluding property/financial companies.
M.C.S. Steel PCL's Altman Z2-Score for today is calculated with this formula:
Z
=
6.56
*
X1
+
3.26
*
X2
+
6.72
*
X3
+
1.05
*
X4_2
=
6.56
*
0.5108
+
3.26
*
0.9605
+
6.72
*
0.1487
+
1.05
*
2.6712
=
10.29
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z2-Score when X4_2 value is 0.
M.C.S. Steel PCL (BKK:MCS) has a Altman Z2-Score of 10.29 as of Jun. 27, 2026. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on M.C.S. Steel PCL and its competitors. This is 31% above median its historical median of 7.88. Over the past decade, M.C.S. Steel PCL's Altman Z2-Score has ranged from 5.71 to 10.78. According to the industry distribution chart, M.C.S. Steel PCL ranks #79 out of 632 companies in the Steel industry, placing it in the top 12.5%.
Is M.C.S. Steel PCL's Altman Z2-Score too high?
M.C.S. Steel PCL's current Altman Z2-Score of 10.29 is 31% above median its 10-year median of 7.88. Over the past 10 years, this metric has ranged from a low of 5.71 to a high of 10.78. The Steel industry median Altman Z2-Score is 3.46. M.C.S. Steel PCL's value of 10.29 is 197.4% above this industry median. Based on the distribution chart, M.C.S. Steel PCL ranks #79 out of 632 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, M.C.S. Steel PCL has a GF Score™ of 68/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does M.C.S. Steel PCL's Altman Z2-Score compare to NUE and STLD?
According to the Steel industry distribution chart, M.C.S. Steel PCL ranks #79 out of 632 companies for Altman Z2-Score. This places M.C.S. Steel PCL in the top 13% of its industry — outperforming the majority of peers. The industry median Altman Z2-Score is 3.46. M.C.S. Steel PCL's value of 10.29 is 197.4% above this benchmark. Historically, M.C.S. Steel PCL's own Altman Z2-Score has ranged from 5.71 to 10.78 over the past decade. While the company's 10-year median is 7.88 vs. the industry median of 3.46, M.C.S. Steel PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z2-Score for a Steel company?
The median Altman Z2-Score among Steel companies is 3.46, based on 632 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z2-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z2-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. M.C.S. Steel PCL's current Altman Z2-Score of 10.29 is 197.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z2-Score mean?
A high Altman Z2-Score can signal that a stock is expensive relative to its fundamentals. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on M.C.S. Steel PCL and its competitors. For the Steel industry, the median Altman Z2-Score is 3.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. M.C.S. Steel PCL's current Altman Z2-Score is 10.29, which is 31% above median its own 10-year median of 7.88. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is M.C.S. Steel PCL stock overvalued right now?
Based on GuruFocus' analysis, M.C.S. Steel PCL (BKK:MCS) is currently considered Modestly Overvalued. The stock's GF Value™ is ฿6.51, compared to a current price of ฿7.65 — trading 17.5% above its estimated fair value. The current Altman Z2-Score is 10.29, which is 31% above median its 10-year median of 7.88 and 197.4% above the Steel industry median of 3.46. M.C.S. Steel PCL's overall GF Score™ is 68/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z2-Score calculated?
Altman Z2-Score is calculated from a company's financial statements. For M.C.S. Steel PCL (BKK:MCS), the current Altman Z2-Score is 10.29 as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is M.C.S. Steel PCL (BKK:MCS) Overvalued in 2026?
Based on GuruFocus' analysis, M.C.S. Steel PCL stock appears to be overvalued.
The current stock price of ฿7.65 is trading 17.5% above its estimated GF Value™ of ฿6.51.
GuruFocus considers M.C.S. Steel PCL to be Modestly Overvalued.
Key valuation signals for BKK:MCS:
Altman Z2-Score: 10.29 (31% above median its 10-year median of 7.88)
GF Value™: ฿6.51 vs. price of ฿7.65 (17.5% above fair value)
Industry Position: 197.4% above the Steel median (#79 of 632)
No single metric tells the full story. See the BKK:MCS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
M.C.S. Steel PCL is engaged in the production and distribution of structural steel products for building construction and residential development projects for sale. It provides and exports steel structure works for various projects. The company's services include engineering design, parts, and quality control. The company's product and services portfolio includes Fabrication and sale of structural steel of which substantial income is earned, Fabrication including installation of structural steel, and Rendering of services. The business operates in three geographical segments: Thailand, Japan, and China. Key revenue is earned from domestic sales.
68GF Score
Get the complete analysis for BKK:MCS
Altman Z2-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:MCS has been successfully added to your 
