Pacific Metals CoTSE:5541 -0.97%58 Dividend Yield % is 6.28% as of Jun. 27, 2026, which is 120% above its 10-year median of 2.86. GuruFocus rates TSE:5541 with a GF Score™ of 58/100 and a GF Value™ of 円1,085.39 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 344 Metals & Mining companies, Pacific Metals Co ranks better than 91.28% on this metric.
As of today (2026-06-27), the Trailing Annual Dividend Yield of Pacific Metals Co is 6.28%.
The historical rank and industry rank for Pacific Metals Co's Dividend Yield % or its related term are showing as below:
TSE:5541'
s Dividend Yield % Range Over the Past 10 Years
Min: 0.48 Med: 2.86 Max: 10.17
Current: 6.28
During the past 13 years, the highest Dividend Yield of Pacific Metals Co was 10.17%. The lowest was 0.48%. And the median was 2.86%.
TSE:5541's Dividend Yield % is ranked better than 91.28% of 344
companies
in the Metals & Mining industry
Industry Median: 1.825
vs TSE:5541: 6.28
If a company's dividend payout ratio is too high, its dividend may not be sustainable. The dividend payout ratio of Pacific Metals Co Ltd is 0.91, which seems too high.
During the past 13 years, the highest Dividend Payout Ratio of Pacific Metals Co was 1.95. The lowest was 0.14. And the median was 0.34.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Pacific Metals Co was 47.10% per year. The lowest was -51.00% per year. And the median was -14.95% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Pacific Metals Co (TSE:5541) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Pacific Metals Co Dividend Yield % Historical Data
* Premium members only.
The historical data trend for Pacific Metals Co's Dividend Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Pacific Metals Co Dividend Yield % Competitor Comparison
For the Other Industrial Metals & Mining subindustry, Pacific Metals Co's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Pacific Metals Co Dividend Yield % vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Pacific Metals Co's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Pacific Metals Co's Dividend Yield % falls into.
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Pacific Metals Co Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
JPY 75.000000
2026-03-30
2026-03-31
2026-06-04
Cash Dividend
semi-annually
JPY:JPY 1.000000
JPY 60.000000
2025-09-29
2025-09-30
2025-12-03
Cash Dividend
semi-annually
JPY:JPY 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
Pacific Metals Co's Trailing Annual Dividend Yield (%) for Today is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Pacific Metals Co (TSE:5541) has a Dividend Yield % of 6.28% as of Jun. 27, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on Pacific Metals Co and its competitors. This is 120% above median its historical median of 2.86. Over the past decade, Pacific Metals Co's Dividend Yield % has ranged from 0.48 to 10.17. According to the industry distribution chart, Pacific Metals Co ranks #30 out of 344 companies in the Metals & Mining industry, placing it in the top 8.7%.
Is Pacific Metals Co's Dividend Yield % too high?
Pacific Metals Co's current Dividend Yield % of 6.28% is 120% above median its 10-year median of 2.86. Over the past 10 years, this metric has ranged from a low of 0.48 to a high of 10.17. The Metals & Mining industry median Dividend Yield % is 1.83. Pacific Metals Co's value of 6.28% is 244.1% above this industry median. Based on the distribution chart, Pacific Metals Co ranks #30 out of 344 companies in the Metals & Mining industry, which is in the top quartile — a strong position relative to peers. Overall, Pacific Metals Co has a GF Score™ of 58/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Pacific Metals Co's Dividend Yield % compare to competitors?
According to the Metals & Mining industry distribution chart, Pacific Metals Co ranks #30 out of 344 companies for Dividend Yield %. This places Pacific Metals Co in the top 9% of its industry — outperforming the majority of peers. The industry median Dividend Yield % is 1.83. Pacific Metals Co's value of 6.28% is 244.1% above this benchmark. Historically, Pacific Metals Co's own Dividend Yield % has ranged from 0.48 to 10.17 over the past decade. While the company's 10-year median is 2.86 vs. the industry median of 1.83, Pacific Metals Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for a Metals & Mining company?
The median Dividend Yield % among Metals & Mining companies is 1.83, based on 344 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Pacific Metals Co's current Dividend Yield % of 6.28% is 244.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on Pacific Metals Co and its competitors. For the Metals & Mining industry, the median Dividend Yield % is 1.83 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Pacific Metals Co's current Dividend Yield % is 6.28%, which is 120% above median its own 10-year median of 2.86. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Pacific Metals Co stock overvalued right now?
Based on GuruFocus' analysis, Pacific Metals Co (TSE:5541) is currently considered Significantly Overvalued. The stock's GF Value™ is 円1,085.39, compared to a current price of 円2,150.00 — trading 98.1% above its estimated fair value. The current Dividend Yield % is 6.28%, which is 120% above median its 10-year median of 2.86 and 244.1% above the Metals & Mining industry median of 1.83. Pacific Metals Co's overall GF Score™ is 58/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For Pacific Metals Co (TSE:5541), the current Dividend Yield % is 6.28% as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Pacific Metals Co (TSE:5541) Overvalued in 2026?
Based on GuruFocus' analysis, Pacific Metals Co stock appears to be overvalued.
The current stock price of 円2,150.00 is trading 98.1% above its estimated GF Value™ of 円1,085.39.
GuruFocus considers Pacific Metals Co to be Significantly Overvalued.
Key valuation signals for TSE:5541:
Dividend Yield %: 6.28% (120% above median its 10-year median of 2.86)
GF Value™: 円1,085.39 vs. price of 円2,150.00 (98.1% above fair value)
Industry Position: 244.1% above the Metals & Mining median (#30 of 344)
No single metric tells the full story. See the TSE:5541 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Pacific Metals Co Ltd manufactures and distributes ferronickel and slag products. The company mainly manufactures ferronickel, stainless steel, and electrical power. It also produces processed ferro-nickel slag which is obtained as a by-product in the smelting process. The firm also engages in nickel mine development projects in the Philippines.
58GF Score
Get the complete analysis for TSE:5541
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:5541 has been successfully added to your 
