Hon Hai Precision Industry CoHNHPF -4.80%91 Altman Z-Score is 3.08 as of Jul. 02, 2026, which is 10% above its 10-year median of 2.80. GuruFocus rates HNHPF with a GF Score™ of 91/100 and a GF Value™ of $14.03 (Fairly Valued). The stock has 1 warning sign investors should review. Among 2,456 Hardware companies, Hon Hai Precision Industry Co ranks worse than 56.76% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Good Sign:
Altman Z-score of 3.09 is strong.
Hon Hai Precision Industry Co has a Altman Z-Score of 3.08, indicating it is in Safe Zones. This implies the Altman Z-Score is strong.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Hon Hai Precision Industry Co's Altman Z-Score or its related term are showing as below:
HNHPF'
s Altman Z-Score Range Over the Past 10 Years
Min: 2.59 Med: 2.8 Max: 3.24
Current: 3.09
During the past 13 years, Hon Hai Precision Industry Co's highest Altman Z-Score was 3.24. The lowest was 2.59. And the median was 2.80.
Hon Hai Precision Industry Co (OTCPK:HNHPF) Altman Z-Score Explanation
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Hon Hai Precision Industry Co Altman Z-Score Chart
For the Electronic Components subindustry, Hon Hai Precision Industry Co's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Hon Hai Precision Industry Co Altman Z-Score vs Hardware Industry
For the Hardware industry and Technology sector, Hon Hai Precision Industry Co's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Hon Hai Precision Industry Co's Altman Z-Score falls into.
Hon Hai Precision Industry Co Altman Z-Score Calculation
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Hon Hai Precision Industry Co (HNHPF) has a Altman Z-Score of 3.08 as of Jul. 02, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Hon Hai Precision Industry Co and its competitors. This is 10% above median its historical median of 2.80. Over the past decade, Hon Hai Precision Industry Co's Altman Z-Score has ranged from 2.59 to 3.24. According to the industry distribution chart, Hon Hai Precision Industry Co ranks #1394 out of 2456 companies in the Hardware industry, placing it in the top 56.8%.
Is Hon Hai Precision Industry Co's Altman Z-Score too high?
Hon Hai Precision Industry Co's current Altman Z-Score of 3.08 is 10% above median its 10-year median of 2.80. Over the past 10 years, this metric has ranged from a low of 2.59 to a high of 3.24. The Hardware industry median Altman Z-Score is 3.60. Hon Hai Precision Industry Co's value of 3.08 is 14.3% below this industry median. Based on the distribution chart, Hon Hai Precision Industry Co ranks #1394 out of 2456 companies in the Hardware industry, which is below the industry midpoint. Overall, Hon Hai Precision Industry Co has a GF Score™ of 91/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Hon Hai Precision Industry Co's Altman Z-Score compare to APH and GLW?
According to the Hardware industry distribution chart, Hon Hai Precision Industry Co ranks #1394 out of 2456 companies for Altman Z-Score. This places Hon Hai Precision Industry Co in the lower half of its industry. The industry median Altman Z-Score is 3.60. Hon Hai Precision Industry Co's value of 3.08 is 14.3% below this benchmark. Historically, Hon Hai Precision Industry Co's own Altman Z-Score has ranged from 2.59 to 3.24 over the past decade. While the company's 10-year median is 2.80 vs. the industry median of 3.60, Hon Hai Precision Industry Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for a Hardware company?
The median Altman Z-Score among Hardware companies is 3.60, based on 2,456 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Hon Hai Precision Industry Co's current Altman Z-Score of 3.08 is 14.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Hon Hai Precision Industry Co and its competitors. For the Hardware industry, the median Altman Z-Score is 3.60 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Hon Hai Precision Industry Co's current Altman Z-Score is 3.08, which is 10% above median its own 10-year median of 2.80. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Hon Hai Precision Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Hon Hai Precision Industry Co (HNHPF) is currently considered Fairly Valued. The stock's GF Value™ is $14.03, compared to a current price of $15.26 — trading 8.7% above its estimated fair value. The current Altman Z-Score is 3.08, which is 10% above median its 10-year median of 2.80 and 14.3% below the Hardware industry median of 3.60. Hon Hai Precision Industry Co's overall GF Score™ is 91/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Hon Hai Precision Industry Co (HNHPF), the current Altman Z-Score is 3.08 as of Jul. 02, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Hon Hai Precision Industry Co (HNHPF) Overvalued in 2026?
Based on GuruFocus' analysis, Hon Hai Precision Industry Co stock appears to be overvalued.
The current stock price of $15.26 is trading 8.7% above its estimated GF Value™ of $14.03.
GuruFocus considers Hon Hai Precision Industry Co to be Fairly Valued.
Key valuation signals for HNHPF:
Altman Z-Score: 3.08 (10% above median its 10-year median of 2.80)
GF Value™: $14.03 vs. price of $15.26 (8.7% above fair value)
Industry Position: 14.3% below the Hardware median (#1394 of 2456)
No single metric tells the full story. See the HNHPF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Hon Hai Precision Industry Co Business Description
Hon Hai Precision is the world's largest contract manufacturer of consumer electronics, communications, and computer products. It is the biggest supplier to Apple, whose business accounted for around 50% of overall revenue in 2025. Hon Hai is also involved in the production of upstream components such as electronic connectors, semiconductor packaging, and metal casings for smartphones, as well as producing servers. These upstream activities are mainly conducted through its listed majority-owned subsidiaries Foxconn Industrial Internet and FIH Mobile. In response to its traditional end markets of computers, smartphones, and telecom equipment maturing in 2019 it started on a strategy to develop expertise in three new growth areas—electric vehicles, digital health, and robotics.
91GF Score
Get the complete analysis for HNHPF
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
HNHPF has been successfully added to your 
