Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Metalic TechnoforgeNSE:METALIC +0.61%15 Current Ratio is 1.35 as of Mar. 2026, which is 26% above its 10-year median of 1.07. GuruFocus rates NSE:METALIC with a GF Score™ of 15/100. The stock has 2 warning signs investors should review. Among 3,088 Industrial Products companies, Metalic Technoforge ranks worse than 75.49% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Metalic Technoforge's current ratio for the quarter that ended in Mar. 2026 was 1.35.
Metalic Technoforge has a current ratio of 1.35. It generally indicates good short-term financial strength.
The historical rank and industry rank for Metalic Technoforge's Current Ratio or its related term are showing as below:
NSE:METALIC'
s Current Ratio Range Over the Past 10 Years
Min: 0.94 Med: 1.07 Max: 1.35
Current: 1.35
During the past 4 years, Metalic Technoforge's highest Current Ratio was 1.35. The lowest was 0.94. And the median was 1.07.
NSE:METALIC's Current Ratio is ranked worse than 75.49% of 3088
companies
in the Industrial Products industry
Industry Median: 1.93
vs NSE:METALIC: 1.35
Metalic Technoforge (NSE:METALIC) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Metalic Technoforge Current Ratio Related Terms
Metalic Technoforge Current Ratio Historical Data
* Premium members only.
The historical data trend for Metalic Technoforge's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Metalic Technoforge Current Ratio Chart
Metalic Technoforge Annual Data
Trend
Mar23
Mar24
Mar25
Mar26
Current Ratio
0.94
1.00
1.14
1.35
Metalic Technoforge Semi-Annual Data
Mar23
Mar24
Mar25
Sep25
Mar26
Current Ratio
0.94
1.00
1.14
1.31
1.35
NSE:METALIC vs ATI, CRS, MLI: Current Ratio Comparison
For the Metal Fabrication subindustry, Metalic Technoforge's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Metalic Technoforge Current Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Metalic Technoforge's Current Ratio distribution charts can be found below:
* The bar in red indicates where Metalic Technoforge's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Metalic Technoforge (NSE:METALIC) has a Current Ratio of 1.35 as of Mar. 2026. This is 26% above median its historical median of 1.07. Over the past decade, Metalic Technoforge's Current Ratio has ranged from 0.94 to 1.35. According to the industry distribution chart, Metalic Technoforge ranks #2331 out of 3088 companies in the Industrial Products industry, placing it in the top 75.5%.
Is Metalic Technoforge's Current Ratio too high?
Metalic Technoforge's current Current Ratio of 1.35 is 26% above median its 10-year median of 1.07. Over the past 10 years, this metric has ranged from a low of 0.94 to a high of 1.35. The Industrial Products industry median Current Ratio is 1.93. Metalic Technoforge's value of 1.35 is 30.1% below this industry median. Based on the distribution chart, Metalic Technoforge ranks #2331 out of 3088 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Metalic Technoforge has a GF Score™ of 15/100, reflecting its overall financial health beyond just this single metric.
How does Metalic Technoforge's Current Ratio compare to ATI and CRS?
According to the Industrial Products industry distribution chart, Metalic Technoforge ranks #2331 out of 3088 companies for Current Ratio. This places Metalic Technoforge in the lower half of its industry. The industry median Current Ratio is 1.93. Metalic Technoforge's value of 1.35 is 30.1% below this benchmark. Historically, Metalic Technoforge's own Current Ratio has ranged from 0.94 to 1.35 over the past decade. While the company's 10-year median is 1.07 vs. the industry median of 1.93, Metalic Technoforge has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Industrial Products company?
The median Current Ratio among Industrial Products companies is 1.93, based on 3,088 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Metalic Technoforge's current Current Ratio of 1.35 is 30.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Industrial Products industry, the median Current Ratio is 1.93 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Metalic Technoforge's current Current Ratio is 1.35, which is 26% above median its own 10-year median of 1.07. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Metalic Technoforge stock overvalued right now?
Metalic Technoforge (NSE:METALIC) has a current Current Ratio of 1.35. The current Current Ratio is 1.35, which is 26% above median its 10-year median of 1.07 and 30.1% below the Industrial Products industry median of 1.93. Metalic Technoforge's overall GF Score™ is 15/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Metalic Technoforge (NSE:METALIC), the current Current Ratio is 1.35 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Metalic Technoforge Ltd is engaged in the business of manufacturing of closed die forged and precision-machined components. The company's product portfolio includes various forged and precision-machined products, including different sizes of rings, ball studs, gear blanks with broaching, gears, coupling assemblies, and other critical components. It serves domestic and international original equipment manufacturers (OEMs) across automotive and non-automotive industries. The company's operations include die manufacturing, forging, heat treatment, shot blasting, precision machining, testing and quality assurance processes. The majority of revenue is derived from the sale of its products, mainly Gears and Transmission Components and General Engineering Components, in India.
15GF Score
Get the complete analysis for NSE:METALIC
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:METALIC has been successfully added to your 
