Tong-Tai Machine Tool CoTPE:4526 -4.88%50 Current Ratio is 1.24 as of Dec. 2025, which is 7% below its 10-year median of 1.34. GuruFocus rates TPE:4526 with a GF Score™ of 50/100 and a GF Value™ of NT$20.28 (Significantly Overvalued). The stock has 7 warning signs investors should review. Among 3,071 Industrial Products companies, Tong-Tai Machine Tool Co ranks worse than 81.96% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Tong-Tai Machine Tool Co's current ratio for the quarter that ended in Dec. 2025 was 1.24.
Tong-Tai Machine Tool Co has a current ratio of 1.24. It generally indicates good short-term financial strength.
The historical rank and industry rank for Tong-Tai Machine Tool Co's Current Ratio or its related term are showing as below:
TPE:4526'
s Current Ratio Range Over the Past 10 Years
Min: 1.23 Med: 1.34 Max: 1.58
Current: 1.24
During the past 13 years, Tong-Tai Machine Tool Co's highest Current Ratio was 1.58. The lowest was 1.23. And the median was 1.34.
TPE:4526's Current Ratio is ranked worse than 81.96% of 3071
companies
in the Industrial Products industry
Industry Median: 1.97
vs TPE:4526: 1.24
Tong-Tai Machine Tool Co (TPE:4526) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Tong-Tai Machine Tool Co Current Ratio Related Terms
Tong-Tai Machine Tool Co Current Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:4526 vs GEV, ETN, PH: Current Ratio Comparison
For the Specialty Industrial Machinery subindustry, Tong-Tai Machine Tool Co's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Tong-Tai Machine Tool Co Current Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Tong-Tai Machine Tool Co's Current Ratio distribution charts can be found below:
* The bar in red indicates where Tong-Tai Machine Tool Co's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tong-Tai Machine Tool Co (TPE:4526) has a Current Ratio of 1.24 as of Dec. 2025. This is near median its historical median of 1.34. Over the past decade, Tong-Tai Machine Tool Co's Current Ratio has ranged from 1.23 to 1.58. According to the industry distribution chart, Tong-Tai Machine Tool Co ranks #2517 out of 3071 companies in the Industrial Products industry, placing it in the top 82%.
Is Tong-Tai Machine Tool Co's Current Ratio too high?
Tong-Tai Machine Tool Co's current Current Ratio of 1.24 is near median its 10-year median of 1.34. Over the past 10 years, this metric has ranged from a low of 1.23 to a high of 1.58. The Industrial Products industry median Current Ratio is 1.97. Tong-Tai Machine Tool Co's value of 1.24 is 37.1% below this industry median. Based on the distribution chart, Tong-Tai Machine Tool Co ranks #2517 out of 3071 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Tong-Tai Machine Tool Co has a GF Score™ of 50/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Tong-Tai Machine Tool Co's Current Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Tong-Tai Machine Tool Co ranks #2517 out of 3071 companies for Current Ratio. This places Tong-Tai Machine Tool Co in the lower half of its industry. The industry median Current Ratio is 1.97. Tong-Tai Machine Tool Co's value of 1.24 is 37.1% below this benchmark. Historically, Tong-Tai Machine Tool Co's own Current Ratio has ranged from 1.23 to 1.58 over the past decade. While the company's 10-year median is 1.34 vs. the industry median of 1.97, Tong-Tai Machine Tool Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Industrial Products company?
The median Current Ratio among Industrial Products companies is 1.97, based on 3,071 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Tong-Tai Machine Tool Co's current Current Ratio of 1.24 is 37.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Industrial Products industry, the median Current Ratio is 1.97 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Tong-Tai Machine Tool Co's current Current Ratio is 1.24, which is near median its own 10-year median of 1.34. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Tong-Tai Machine Tool Co stock overvalued right now?
Based on GuruFocus' analysis, Tong-Tai Machine Tool Co (TPE:4526) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$20.28, compared to a current price of NT$39.00 — trading 92.3% above its estimated fair value. The current Current Ratio is 1.24, which is near median its 10-year median of 1.34 and 37.1% below the Industrial Products industry median of 1.97. Tong-Tai Machine Tool Co's overall GF Score™ is 50/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Tong-Tai Machine Tool Co (TPE:4526), the current Current Ratio is 1.24 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Tong-Tai Machine Tool Co (TPE:4526) Overvalued in 2026?
Based on GuruFocus' analysis, Tong-Tai Machine Tool Co stock appears to be overvalued.
The current stock price of NT$39.00 is trading 92.3% above its estimated GF Value™ of NT$20.28.
GuruFocus considers Tong-Tai Machine Tool Co to be Significantly Overvalued.
Key valuation signals for TPE:4526:
Current Ratio: 1.24 (near median its 10-year median of 1.34)
GF Value™: NT$20.28 vs. price of NT$39.00 (92.3% above fair value)
Industry Position: 37.1% below the Industrial Products median (#2517 of 3071)
No single metric tells the full story. See the TPE:4526 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Tong-Tai Machine Tool Co Ltd is engaged in the manufacturing and selling of machines and selling of machine tools, computer components, computer numerical control lathes, and cutting centers. Its products line includes machine tools, such as vertical machining, 5-axis machining, tapping, horizontal machining, 5-axis horizontal machining, multi-tasking turning, and ultrasonic-assisted machining centers, as well as boring and milling machines, horizontal and vertical CNC lathes, and wheel machines; and PCB machines, comprising drilling and routing machines. The company operates in various geographical areas including Taiwan, China, Europe, Asia, and others. The company has three segments: Machine Manufacturer, which derives key revenue; Component Manufacturer and Others.
50GF Score
Get the complete analysis for TPE:4526
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4526 has been successfully added to your 
