Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
EV-to-EBITDA is calculated as enterprise value divided by its EBITDA. As of today, Tong-Tai Machine Tool Co's enterprise value is NT$12,101 Mil.
Tong-Tai Machine Tool Co's EBITDA for the trailing twelve months (TTM) ended in Jun. 2026 was NT$-89 Mil. Therefore, Tong-Tai Machine Tool Co's EV-to-EBITDA for today is -135.96.
The historical rank and industry rank for Tong-Tai Machine Tool Co's EV-to-EBITDA or its related term are showing as below:
TPE:4526'
s EV-to-EBITDA Range Over the Past 10 Years
Min: -850.71 Med: 17.11 Max: 259
Current: -135.96
During the past 13 years, the highest EV-to-EBITDA of Tong-Tai Machine Tool Co was 259.00. The lowest was -850.71. And the median was 17.11.
TPE:4526's EV-to-EBITDA is ranked worse than 100% of 2479
companies
in the Industrial Products industry
Industry Median: 15.56
vs TPE:4526: -135.96
EV-to-EBITDA is a valuation multiple used in finance and investment to measure the value of a company. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio to determine the fair market value of a company.
Tong-Tai Machine Tool Co (TPE:4526) EV-to-EBITDA Explanation
EV-to-EBITDA is a valuation multiple used in finance and investment to measure the value of a company. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Tong-Tai Machine Tool Co's PE Ratio (TTM) for today is calculated as:
Tong-Tai Machine Tool Co's share price for today is NT$30.30.
Tong-Tai Machine Tool Co's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$-1.770.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Study has found that the companies with the lowest EV-to-EBITDA outperforms companies measured as cheap by other ratios such as PE Ratio (TTM).
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Tong-Tai Machine Tool Co's EV-to-EBITDA, along with its competitors' market caps and EV-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Tong-Tai Machine Tool Co EV-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Tong-Tai Machine Tool Co's EV-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Tong-Tai Machine Tool Co's EV-to-EBITDA falls into.
Tong-Tai Machine Tool Co's current Enterprise Value is NT$12,101 Mil.
Tong-Tai Machine Tool Co's EBITDA for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$-89 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tong-Tai Machine Tool Co (TPE:4526) has a EV-to-EBITDA of -135.96 as of Aug. 30, 2026. EV to EBITDA ratio is the company's enterprise value divided by earnings before interest, taxes, depreciation and amortization. View historical data on Tong-Tai Machine Tool Co. According to the industry distribution chart, Tong-Tai Machine Tool Co ranks #999999 out of 2479 companies in the Industrial Products industry.
Is Tong-Tai Machine Tool Co's EV-to-EBITDA too high?
Tong-Tai Machine Tool Co's current EV-to-EBITDA is -135.96. Based on the distribution chart, Tong-Tai Machine Tool Co ranks #999999 out of 2479 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Tong-Tai Machine Tool Co has a GF Score™ of 64/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Tong-Tai Machine Tool Co's EV-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Tong-Tai Machine Tool Co ranks #999999 out of 2479 companies for EV-to-EBITDA. This places Tong-Tai Machine Tool Co in the lower half of its industry. The industry median EV-to-EBITDA is 15.56. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBITDA for an Industrial Products company?
The median EV-to-EBITDA among Industrial Products companies is 15.56, based on 2,479 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBITDA mean?
A high EV-to-EBITDA can signal that a stock is expensive relative to its fundamentals. EV to EBITDA ratio is the company's enterprise value divided by earnings before interest, taxes, depreciation and amortization. View historical data on Tong-Tai Machine Tool Co. For the Industrial Products industry, the median EV-to-EBITDA is 15.56 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Tong-Tai Machine Tool Co's current EV-to-EBITDA is -135.96. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Tong-Tai Machine Tool Co stock overvalued right now?
Based on GuruFocus' analysis, Tong-Tai Machine Tool Co (TPE:4526) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$25.98, compared to a current price of NT$30.30 — trading 16.6% above its estimated fair value. The current EV-to-EBITDA is -135.96. Tong-Tai Machine Tool Co's overall GF Score™ is 64/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBITDA calculated?
EV-to-EBITDA is calculated from a company's financial statements. For Tong-Tai Machine Tool Co (TPE:4526), the current EV-to-EBITDA is -135.96 as of Aug. 30, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Tong-Tai Machine Tool Co (TPE:4526) Overvalued in 2026?
Based on GuruFocus' analysis, Tong-Tai Machine Tool Co stock appears to be overvalued.
The current stock price of NT$30.30 is trading 16.6% above its estimated GF Value™ of NT$25.98.
GuruFocus considers Tong-Tai Machine Tool Co to be Modestly Overvalued.
Key valuation signals for TPE:4526:
EV-to-EBITDA: -135.96
GF Value™: NT$25.98 vs. price of NT$30.30 (16.6% above fair value)
No single metric tells the full story. See the TPE:4526 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Tong-Tai Machine Tool Co Ltd is engaged in the manufacturing and selling of machines and selling of machine tools, computer components, computer numerical control lathes, and cutting centers. Its products line includes machine tools, such as vertical machining, 5-axis machining, tapping, horizontal machining, 5-axis horizontal machining, multi-tasking turning, and ultrasonic-assisted machining centers, as well as boring and milling machines, horizontal and vertical CNC lathes, and wheel machines; and PCB machines, comprising drilling and routing machines. The company operates in various geographical areas including Taiwan, China, Europe, Asia, and others. The company has three segments: Machine Manufacturer, which derives key revenue; Component Manufacturer and Others.
64GF Score
Get the complete analysis for TPE:4526
EV-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4526 has been successfully added to your 
