Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Takeda Machinery CoTSE:6150 +1.19%70 Days Payable is 25.34 as of Feb. 2026, which is 49% below its 10-year median of 49.83. GuruFocus rates TSE:6150 with a GF Score™ of 70/100 and a GF Value™ of 円2,809.59 (Fairly Valued). The stock has 3 warning signs investors should review. Among 2,992 Industrial Products companies, Takeda Machinery Co ranks worse than 63.3% on this metric.
The historical rank and industry rank for Takeda Machinery Co's Days Payable or its related term are showing as below:
TSE:6150'
s Days Payable Range Over the Past 10 Years
Min: 38.24 Med: 49.83 Max: 58.25
Current: 58.25
During the past 13 years, Takeda Machinery Co's highest Days Payable was 58.25. The lowest was 38.24. And the median was 49.83.
TSE:6150's Days Payable is ranked worse than 63.3% of 2992
companies
in the Industrial Products industry
Industry Median: 78.045
vs TSE:6150: 58.25
Takeda Machinery Co's Days Payable
increased
from Nov. 2024 (0.00) to Feb. 2026 (25.34).
It may suggest that Takeda Machinery Codelayed paying its suppliers.
Takeda Machinery Co Days Payable Related Terms
Takeda Machinery Co Days Payable Historical Data
* Premium members only.
The historical data trend for Takeda Machinery Co's Days Payable can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6150 vs CRS, ATI, MLI: Days Payable Comparison
For the Metal Fabrication subindustry, Takeda Machinery Co's Days Payable, along with its competitors' market caps and Days Payable data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Takeda Machinery Co Days Payable vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Takeda Machinery Co's Days Payable distribution charts can be found below:
* The bar in red indicates where Takeda Machinery Co's Days Payable falls into.
Days Payable indicates the number of days that the account payable relative to cost of goods sold the company has. An increase of Days Payable may suggest that the company delays paying its suppliers.
Takeda Machinery Co's Days Payable for the fiscal year that ended in May. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Takeda Machinery Co (TSE:6150) has a Days Payable of 25.34 as of Feb. 2026. Days payable represents the average amount of days a company waits to pay its invoices from suppliers. View historical data on Takeda Machinery Co and its competitors. This is 49% below median its historical median of 49.83. Over the past decade, Takeda Machinery Co's Days Payable has ranged from 38.24 to 58.25. According to the industry distribution chart, Takeda Machinery Co ranks #1894 out of 2992 companies in the Industrial Products industry, placing it in the top 63.3%.
Is Takeda Machinery Co's Days Payable too high?
Takeda Machinery Co's current Days Payable of 25.34 is 49% below median its 10-year median of 49.83. Over the past 10 years, this metric has ranged from a low of 38.24 to a high of 58.25. The Industrial Products industry median Days Payable is 78.05. Takeda Machinery Co's value of 25.34 is 67.5% below this industry median. Based on the distribution chart, Takeda Machinery Co ranks #1894 out of 2992 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Takeda Machinery Co has a GF Score™ of 70/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Takeda Machinery Co's Days Payable compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Takeda Machinery Co ranks #1894 out of 2992 companies for Days Payable. This places Takeda Machinery Co in the lower half of its industry. The industry median Days Payable is 78.05. Takeda Machinery Co's value of 25.34 is 67.5% below this benchmark. Historically, Takeda Machinery Co's own Days Payable has ranged from 38.24 to 58.25 over the past decade. While the company's 10-year median is 49.83 vs. the industry median of 78.05, Takeda Machinery Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Days Payable for an Industrial Products company?
The median Days Payable among Industrial Products companies is 78.05, based on 2,992 companies in the industry. Companies in the top quartile (top 25%) have a Days Payable significantly above this median, while those in the bottom quartile fall well below. However, Days Payable should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Takeda Machinery Co's current Days Payable of 25.34 is 67.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Days Payable mean?
A high Days Payable can signal that a stock is expensive relative to its fundamentals. Days payable represents the average amount of days a company waits to pay its invoices from suppliers. View historical data on Takeda Machinery Co and its competitors. For the Industrial Products industry, the median Days Payable is 78.05 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Takeda Machinery Co's current Days Payable is 25.34, which is 49% below median its own 10-year median of 49.83. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Takeda Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Takeda Machinery Co (TSE:6150) is currently considered Fairly Valued. The stock's GF Value™ is 円2,809.59, compared to a current price of 円2,800.00 — trading 0.3% below its estimated fair value. The current Days Payable is 25.34, which is 49% below median its 10-year median of 49.83 and 67.5% below the Industrial Products industry median of 78.05. Takeda Machinery Co's overall GF Score™ is 70/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Days Payable calculated?
Days Payable is calculated from a company's financial statements. For Takeda Machinery Co (TSE:6150), the current Days Payable is 25.34 as of Feb. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Takeda Machinery Co (TSE:6150) Overvalued in 2026?
Based on GuruFocus' analysis, Takeda Machinery Co stock appears to be undervalued.
The current stock price of 円2,800.00 is trading 0.3% below its estimated GF Value™ of 円2,809.59.
GuruFocus considers Takeda Machinery Co to be Fairly Valued.
Key valuation signals for TSE:6150:
Days Payable: 25.34 (49% below median its 10-year median of 49.83)
GF Value™: 円2,809.59 vs. price of 円2,800.00 (0.3% below fair value)
Industry Position: 67.5% below the Industrial Products median (#1894 of 2992)
No single metric tells the full story. See the TSE:6150 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Takeda Machinery Co Ltd is engaged in production of shape steel processing machine, circular saw cutting machine, and metal mold. The products of the company include flat drill machine, H type steel drill machine, and sheet metal processing machine.
70GF Score
Get the complete analysis for TSE:6150
Days Payable is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6150 has been successfully added to your 
