Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Takeda Machinery CoTSE:6150 +1.19%70 EBITDA Margin % is 1.22% as of Feb. 2026, which is 92% below its 10-year median of 15.48. GuruFocus rates TSE:6150 with a GF Score™ of 70/100 and a GF Value™ of 円2,809.59 (Fairly Valued). The stock has 3 warning signs investors should review. Among 3,031 Industrial Products companies, Takeda Machinery Co ranks worse than 80.04% on this metric.
Takeda Machinery Co (TSE:6150) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Takeda Machinery Co EBITDA Margin % Related Terms
Takeda Machinery Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Takeda Machinery Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6150 vs CRS, ATI, MLI: EBITDA Margin % Comparison
For the Metal Fabrication subindustry, Takeda Machinery Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Takeda Machinery Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Takeda Machinery Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Takeda Machinery Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Takeda Machinery Co (TSE:6150) has a EBITDA Margin % of 1.22% as of Feb. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Takeda Machinery Co and its competitors. This is 92% below median its historical median of 15.48. Over the past decade, Takeda Machinery Co's EBITDA Margin % has ranged from 0.64 to 18.46. According to the industry distribution chart, Takeda Machinery Co ranks #2426 out of 3031 companies in the Industrial Products industry, placing it in the top 80%.
Is Takeda Machinery Co's EBITDA Margin % too high?
Takeda Machinery Co's current EBITDA Margin % of 1.22% is 92% below median its 10-year median of 15.48. Over the past 10 years, this metric has ranged from a low of 0.64 to a high of 18.46. The Industrial Products industry median EBITDA Margin % is 9.42. Takeda Machinery Co's value of 1.22% is 87% below this industry median. Based on the distribution chart, Takeda Machinery Co ranks #2426 out of 3031 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Takeda Machinery Co has a GF Score™ of 70/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Takeda Machinery Co's EBITDA Margin % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Takeda Machinery Co ranks #2426 out of 3031 companies for EBITDA Margin %. This places Takeda Machinery Co in the lower half of its industry. The industry median EBITDA Margin % is 9.42. Takeda Machinery Co's value of 1.22% is 87% below this benchmark. Historically, Takeda Machinery Co's own EBITDA Margin % has ranged from 0.64 to 18.46 over the past decade. While the company's 10-year median is 15.48 vs. the industry median of 9.42, Takeda Machinery Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.42, based on 3,031 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Takeda Machinery Co's current EBITDA Margin % of 1.22% is 87% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Takeda Machinery Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.42 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Takeda Machinery Co's current EBITDA Margin % is 1.22%, which is 92% below median its own 10-year median of 15.48. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Takeda Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Takeda Machinery Co (TSE:6150) is currently considered Fairly Valued. The stock's GF Value™ is 円2,809.59, compared to a current price of 円2,800.00 — trading 0.3% below its estimated fair value. The current EBITDA Margin % is 1.22%, which is 92% below median its 10-year median of 15.48 and 87% below the Industrial Products industry median of 9.42. Takeda Machinery Co's overall GF Score™ is 70/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Takeda Machinery Co (TSE:6150), the current EBITDA Margin % is 1.22% as of Feb. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Takeda Machinery Co (TSE:6150) Overvalued in 2026?
Based on GuruFocus' analysis, Takeda Machinery Co stock appears to be undervalued.
The current stock price of 円2,800.00 is trading 0.3% below its estimated GF Value™ of 円2,809.59.
GuruFocus considers Takeda Machinery Co to be Fairly Valued.
Key valuation signals for TSE:6150:
EBITDA Margin %: 1.22% (92% below median its 10-year median of 15.48)
GF Value™: 円2,809.59 vs. price of 円2,800.00 (0.3% below fair value)
Industry Position: 87% below the Industrial Products median (#2426 of 3031)
No single metric tells the full story. See the TSE:6150 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Takeda Machinery Co Ltd is engaged in production of shape steel processing machine, circular saw cutting machine, and metal mold. The products of the company include flat drill machine, H type steel drill machine, and sheet metal processing machine.
70GF Score
Get the complete analysis for TSE:6150
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6150 has been successfully added to your 
