Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Graham Number is a figure that measures a stock's fundamental value by taking into account the company's earnings per share and book value per share. The Graham number is the upper bound of the price range that a defensive investor should pay for the stock. According to the theory, any stock price below the Graham number is considered undervalued, and thus worth investing in.
As of today (2026-09-03), the stock price of Takeda Machinery Co is 円2781.00. Takeda Machinery Co's graham number for the quarter that ended in May. 2026 was 円6,293.20. Therefore, Takeda Machinery Co's Price to Graham Number ratio for today is 0.44.
The historical rank and industry rank for Takeda Machinery Co's Graham Number or its related term are showing as below:
TSE:6150'
s Price-to-Graham-Number Range Over the Past 10 Years
Min: 0.35 Med: 0.47 Max: 0.72
Current: 0.44
During the past 13 years, the highest Price to Graham Number ratio of Takeda Machinery Co was 0.72. The lowest was 0.35. And the median was 0.47.
TSE:6150's Price-to-Graham-Number is ranked better than 94.6% of 2221
companies
in the Industrial Products industry
Industry Median: 1.75
vs TSE:6150: 0.44
Graham Number is a combination of asset valuation and earnings power valuation. It is a very conservative way of valuing a stock.
Takeda Machinery Co (TSE:6150) Graham Number Explanation
Ben Graham actually did not publish a formula like this. But he wrote in The Intelligent Investor (1948 version) regarding to the criteria for purchases:
Current price should not be more than 15 times average earnings of the past three years.
Current price should not be more than 1.5 times the book value last reported. However, a multiplier of earnings below 15 could justify a correspondingly higher multiplier of assets. As a rule of thumb we suggest that the product of the multiplier times the ratio of price to book value should not exceed 22.5. (This figure corresponds to 15 times earnings and 1.5 times book value. It would admit an issue selling at only 9 times earnings and 2.5 times asset value, etc.)
Unlike valuation methods such as DCF or Discounted Earnings, the Graham number does not take growth into the valuation. Unlike the valuation methods based on book value alone, it takes into account the earnings power. Therefore, the Graham Number is a combination of asset valuation and earnings power valuation.
In general, the Graham number is a very conservative way of valuing a stock. It cannot be applied to companies with negative book values.
Takeda Machinery Co's Price to Graham number Ratio for today is calculated as
Price to Graham number
=
Share Price (Today)
/
Graham number (Q: May. 2026 )
=
2781.00
/
6,293.20
=
0.44
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Please keep these in mind:
1. Graham Number does not take growth into account. Therefore it underestimates the values of the companies that have good earnings growth. We feel that if the earnings per share grows more than 10% a year, Graham Number underestimates the value.
2. Graham Number punishes the companies that have temporarily low earnings. Therefore, an average of earnings makes more sense in the calculation of Graham Number.
3. Graham Numbers underestimates companies that are light with book.
Takeda Machinery Co Graham Number Related Terms
Takeda Machinery Co Graham Number Historical Data
* Premium members only.
The historical data trend for Takeda Machinery Co's Graham Number can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6150 vs ATI, CRS, MLI: Graham Number Comparison
For the Metal Fabrication subindustry, Takeda Machinery Co's Price-to-Graham-Number, along with its competitors' market caps and Price-to-Graham-Number data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Takeda Machinery Co Price-to-Graham-Number vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Takeda Machinery Co's Price-to-Graham-Number distribution charts can be found below:
* The bar in red indicates where Takeda Machinery Co's Price-to-Graham-Number falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Takeda Machinery Co (TSE:6150) has a Graham Number of 円6,293.20 as of May. 2026. The Graham Number values a company based on its per-share earnings and book value. View historical data on Takeda Machinery Co and its competitors. According to the industry distribution chart, Takeda Machinery Co ranks #120 out of 2221 companies in the Industrial Products industry, placing it in the top 5.4%.
Is Takeda Machinery Co's Graham Number too high?
Takeda Machinery Co's current Graham Number is 円6,293.20. Based on the distribution chart, Takeda Machinery Co ranks #120 out of 2221 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Takeda Machinery Co has a GF Score™ of 75/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Takeda Machinery Co's Graham Number compare to ATI and CRS?
According to the Industrial Products industry distribution chart, Takeda Machinery Co ranks #120 out of 2221 companies for Graham Number. This places Takeda Machinery Co in the top 5% of its industry — outperforming the majority of peers. The industry median Graham Number is 1.75. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Graham Number for an Industrial Products company?
The median Graham Number among Industrial Products companies is 1.75, based on 2,221 companies in the industry. Companies in the top quartile (top 25%) have a Graham Number significantly above this median, while those in the bottom quartile fall well below. However, Graham Number should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Graham Number mean?
A high Graham Number can signal that a stock is expensive relative to its fundamentals. The Graham Number values a company based on its per-share earnings and book value. View historical data on Takeda Machinery Co and its competitors. For the Industrial Products industry, the median Graham Number is 1.75 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Takeda Machinery Co's current Graham Number is 円6,293.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Takeda Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Takeda Machinery Co (TSE:6150) is currently considered Fairly Valued. The stock's GF Value™ is 円3,036.07, compared to a current price of 円2,781.00 — trading 8.4% below its estimated fair value. The current Graham Number is 円6,293.20. Takeda Machinery Co's overall GF Score™ is 75/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Graham Number calculated?
Graham Number is calculated from a company's financial statements. For Takeda Machinery Co (TSE:6150), the current Graham Number is 円6,293.20 as of May. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Takeda Machinery Co (TSE:6150) Overvalued in 2026?
Based on GuruFocus' analysis, Takeda Machinery Co stock appears to be undervalued.
The current stock price of 円2,781.00 is trading 8.4% below its estimated GF Value™ of 円3,036.07.
GuruFocus considers Takeda Machinery Co to be Fairly Valued.
Key valuation signals for TSE:6150:
Graham Number: 円6,293.20
GF Value™: 円3,036.07 vs. price of 円2,781.00 (8.4% below fair value)
No single metric tells the full story. See the TSE:6150 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Takeda Machinery Co Ltd is engaged in production of shape steel processing machine, circular saw cutting machine, and metal mold. The products of the company include flat drill machine, H type steel drill machine, and sheet metal processing machine.
75GF Score
Get the complete analysis for TSE:6150
Graham Number is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6150 has been successfully added to your 
