Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Takeda Machinery CoTSE:6150 +1.19%70 ROA % is 0.22% as of Feb. 2026, which is 96% below its 10-year median of 5.55. GuruFocus rates TSE:6150 with a GF Score™ of 70/100 and a GF Value™ of 円2,809.59 (Fairly Valued). The stock has 3 warning signs investors should review. Among 3,074 Industrial Products companies, Takeda Machinery Co ranks worse than 73.1% on this metric.
ROA % is calculated as Net Income divided by its average Total Assets over a certain period of time. Takeda Machinery Co's annualizedNet Income for the quarter that ended in Feb. 2026 was 円16 Mil.
Takeda Machinery Co's average Total Assets over the quarter that ended in Feb. 2026 was 円7,503 Mil. Therefore, Takeda Machinery Co's annualized ROA % for the quarter that ended in Feb. 2026 was 0.22%.
The historical rank and industry rank for Takeda Machinery Co's ROA % or its related term are showing as below:
TSE:6150'
s ROA % Range Over the Past 10 Years
Min: -0.06 Med: 5.55 Max: 10.12
Current: -0.06
During the past 13 years, Takeda Machinery Co's highest ROA % was 10.12%. The lowest was -0.06%. And the median was 5.55%.
TSE:6150's ROA % is ranked worse than 73.1% of 3074
companies
in the Industrial Products industry
Industry Median: 3.045
vs TSE:6150: -0.06
Takeda Machinery Co (TSE:6150) ROA % Explanation
ROA % measures the rate of return on the total assets (shareholder equity plus liabilities). It measures a firm's efficiency at generating profits from shareholders' equity plus its liabilities. ROA % shows how well a company uses what it has to generate earnings. ROA %s can vary drastically across industries. Therefore, ROA % should not be used to compare companies in different industries. For retailers, a ROA % of higher than 5% is expected. For example, Wal-Mart (WMT) has a ROA % of about 8% as of 2012. For banks, ROA % is close to their interest spread. A banks ROA % is typically well under 2%.
Similar to ROE, ROA % is affected by profit margins and asset turnover. This can be seen from the Du Pont Formula:
Note:
The Net Income data used here is four times the quarterly (Feb. 2026) net income data. The Revenue data used here is four times the quarterly (Feb. 2026) revenue data.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Like ROE, ROA % is calculated with only 12 months data. Fluctuations in the company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. ROA % can be affected by events such as stock buyback or issuance, and by goodwill, a company's tax rate and its interest payment. ROA % may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high ROA % may indicate vulnerability in the durability of the competitive advantage.
E.g. Raising $43b to take on KO is impossible, but $1.7b to take on Moody's is. Although Moody's ROA % and underlying economics is far superior to Coca Cola, the durability is far weaker because of lower entry cost.
Takeda Machinery Co ROA % Related Terms
Takeda Machinery Co ROA % Historical Data
* Premium members only.
The historical data trend for Takeda Machinery Co's ROA % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, Takeda Machinery Co's ROA %, along with its competitors' market caps and ROA % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Takeda Machinery Co ROA % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Takeda Machinery Co's ROA % distribution charts can be found below:
* The bar in red indicates where Takeda Machinery Co's ROA % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual ROA %, the net income of the last fiscal year and the average total assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is four times the quarterly (Feb. 2026) net income data.
ROA % is displayed in the 30-year financial page.
Takeda Machinery Co (TSE:6150) has a ROA % of 0.22% as of Feb. 2026. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Takeda Machinery Co and its competitors. This is 96% below median its historical median of 5.55. According to the industry distribution chart, Takeda Machinery Co ranks #2247 out of 3074 companies in the Industrial Products industry, placing it in the top 73.1%.
Is Takeda Machinery Co's ROA % too high?
Takeda Machinery Co's current ROA % of 0.22% is 96% below median its 10-year median of 5.55. The Industrial Products industry median ROA % is 3.05. Takeda Machinery Co's value of 0.22% is 92.8% below this industry median. Based on the distribution chart, Takeda Machinery Co ranks #2247 out of 3074 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Takeda Machinery Co has a GF Score™ of 70/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Takeda Machinery Co's ROA % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Takeda Machinery Co ranks #2247 out of 3074 companies for ROA %. This places Takeda Machinery Co in the lower half of its industry. The industry median ROA % is 3.05. Takeda Machinery Co's value of 0.22% is 92.8% below this benchmark. While the company's 10-year median is 5.55 vs. the industry median of 3.05, Takeda Machinery Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROA % for an Industrial Products company?
The median ROA % among Industrial Products companies is 3.05, based on 3,074 companies in the industry. Companies in the top quartile (top 25%) have a ROA % significantly above this median, while those in the bottom quartile fall well below. However, ROA % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Takeda Machinery Co's current ROA % of 0.22% is 92.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROA % mean?
A high ROA % can signal that a stock is expensive relative to its fundamentals. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Takeda Machinery Co and its competitors. For the Industrial Products industry, the median ROA % is 3.05 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Takeda Machinery Co's current ROA % is 0.22%, which is 96% below median its own 10-year median of 5.55. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Takeda Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Takeda Machinery Co (TSE:6150) is currently considered Fairly Valued. The stock's GF Value™ is 円2,809.59, compared to a current price of 円2,800.00 — trading 0.3% below its estimated fair value. The current ROA % is 0.22%, which is 96% below median its 10-year median of 5.55 and 92.8% below the Industrial Products industry median of 3.05. Takeda Machinery Co's overall GF Score™ is 70/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROA % calculated?
ROA % is calculated from a company's financial statements. For Takeda Machinery Co (TSE:6150), the current ROA % is 0.22% as of Feb. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Takeda Machinery Co (TSE:6150) Overvalued in 2026?
Based on GuruFocus' analysis, Takeda Machinery Co stock appears to be undervalued.
The current stock price of 円2,800.00 is trading 0.3% below its estimated GF Value™ of 円2,809.59.
GuruFocus considers Takeda Machinery Co to be Fairly Valued.
Key valuation signals for TSE:6150:
ROA %: 0.22% (96% below median its 10-year median of 5.55)
GF Value™: 円2,809.59 vs. price of 円2,800.00 (0.3% below fair value)
Industry Position: 92.8% below the Industrial Products median (#2247 of 3074)
No single metric tells the full story. See the TSE:6150 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Takeda Machinery Co Ltd is engaged in production of shape steel processing machine, circular saw cutting machine, and metal mold. The products of the company include flat drill machine, H type steel drill machine, and sheet metal processing machine.
70GF Score
Get the complete analysis for TSE:6150
ROA % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6150 has been successfully added to your 
