Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Fine Blanking & Tool CoROCO:4535 81 Debt-to-EBITDA is 0.04 as of Jun. 2026, which is at its 10-year median of 0.04. GuruFocus rates ROCO:4535 with a GF Score™ of 81/100 and a GF Value™ of NT$28.27 (Fairly Valued). The stock has 2 warning signs investors should review. Among 1,109 Vehicles & Parts companies, Fine Blanking & Tool Co ranks better than 96.75% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Fine Blanking & Tool Co's Debt-to-EBITDA or its related term are showing as below:
ROCO:4535'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.01 Med: 0.04 Max: 0.05
Current: 0.04
During the past 13 years, the highest Debt-to-EBITDA Ratio of Fine Blanking & Tool Co was 0.05. The lowest was 0.01. And the median was 0.04.
ROCO:4535's Debt-to-EBITDA is ranked better than 96.75% of 1109
companies
in the Vehicles & Parts industry
Industry Median: 2.29
vs ROCO:4535: 0.04
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Fine Blanking & Tool Co Debt-to-EBITDA Related Terms
Fine Blanking & Tool Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4535 vs ORLY, AZO, GPC: Debt-to-EBITDA Comparison
For the Auto Parts subindustry, Fine Blanking & Tool Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Fine Blanking & Tool Co Debt-to-EBITDA vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Fine Blanking & Tool Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Fine Blanking & Tool Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Fine Blanking & Tool Co (ROCO:4535) has a Debt-to-EBITDA of 0.04 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Fine Blanking & Tool Co. This is near median its historical median of 0.04. Over the past decade, Fine Blanking & Tool Co's Debt-to-EBITDA has ranged from 0.01 to 0.05. According to the industry distribution chart, Fine Blanking & Tool Co ranks #36 out of 1109 companies in the Vehicles & Parts industry, placing it in the top 3.2%.
Is Fine Blanking & Tool Co's Debt-to-EBITDA too high?
Fine Blanking & Tool Co's current Debt-to-EBITDA of 0.04 is near median its 10-year median of 0.04. Over the past 10 years, this metric has ranged from a low of 0.01 to a high of 0.05. The Vehicles & Parts industry median Debt-to-EBITDA is 2.29. Fine Blanking & Tool Co's value of 0.04 is 98.3% below this industry median. Based on the distribution chart, Fine Blanking & Tool Co ranks #36 out of 1109 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, Fine Blanking & Tool Co has a GF Score™ of 81/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Fine Blanking & Tool Co's Debt-to-EBITDA compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Fine Blanking & Tool Co ranks #36 out of 1109 companies for Debt-to-EBITDA. This places Fine Blanking & Tool Co in the top 3% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 2.29. Fine Blanking & Tool Co's value of 0.04 is 98.3% below this benchmark. Historically, Fine Blanking & Tool Co's own Debt-to-EBITDA has ranged from 0.01 to 0.05 over the past decade. While the company's 10-year median is 0.04 vs. the industry median of 2.29, Fine Blanking & Tool Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Vehicles & Parts company?
The median Debt-to-EBITDA among Vehicles & Parts companies is 2.29, based on 1,109 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Fine Blanking & Tool Co's current Debt-to-EBITDA of 0.04 is 98.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Fine Blanking & Tool Co. For the Vehicles & Parts industry, the median Debt-to-EBITDA is 2.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Fine Blanking & Tool Co's current Debt-to-EBITDA is 0.04, which is near median its own 10-year median of 0.04. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Fine Blanking & Tool Co stock overvalued right now?
Based on GuruFocus' analysis, Fine Blanking & Tool Co (ROCO:4535) is currently considered Fairly Valued. The stock's GF Value™ is NT$28.27, compared to a current price of NT$28.80 — trading 1.9% above its estimated fair value. The current Debt-to-EBITDA is 0.04, which is near median its 10-year median of 0.04 and 98.3% below the Vehicles & Parts industry median of 2.29. Fine Blanking & Tool Co's overall GF Score™ is 81/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Fine Blanking & Tool Co (ROCO:4535), the current Debt-to-EBITDA is 0.04 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Fine Blanking & Tool Co (ROCO:4535) Overvalued in 2026?
Based on GuruFocus' analysis, Fine Blanking & Tool Co stock appears to be overvalued.
The current stock price of NT$28.80 is trading 1.9% above its estimated GF Value™ of NT$28.27.
GuruFocus considers Fine Blanking & Tool Co to be Fairly Valued.
Key valuation signals for ROCO:4535:
Debt-to-EBITDA: 0.04 (near median its 10-year median of 0.04)
GF Value™: NT$28.27 vs. price of NT$28.80 (1.9% above fair value)
Industry Position: 98.3% below the Vehicles & Parts median (#36 of 1109)
No single metric tells the full story. See the ROCO:4535 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Fine Blanking & Tool Co Ltd is a Taiwan-based manufacturer and seller of automobile and motorcycle parts, and various molds. Its product portfolio includes auto parts, locomotive stamping parts, bicycle parts, Fine blanking parts, and off-road. The group operates in two segments that include Domestic Operations and Overseas Operations. The majority of revenue is generated from the Overseas Operations segment, which is engaged in the manufacturing, processing, and production of various products and precision stamping parts for automobiles, motorcycles, and special vehicles. Geographically, the company derives key revenue from Asia (excluding Taiwan) and the rest from America, Europe, and Taiwan.
81GF Score
Get the complete analysis for ROCO:4535
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4535 has been successfully added to your 
