Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Fine Blanking & Tool CoROCO:4535 +2.94%81 EBITDA Margin % is 17.95% as of Dec. 2025, which is 4% above its 10-year median of 17.27. GuruFocus rates ROCO:4535 with a GF Score™ of 81/100 and a GF Value™ of NT$28.40 (Fairly Valued). The stock has 4 warning signs investors should review. Among 1,320 Vehicles & Parts companies, Fine Blanking & Tool Co ranks better than 81.74% on this metric.
Fine Blanking & Tool Co (ROCO:4535) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Fine Blanking & Tool Co EBITDA Margin % Related Terms
Fine Blanking & Tool Co EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4535 vs ORLY, AZO: EBITDA Margin % Comparison
For the Auto Parts subindustry, Fine Blanking & Tool Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Fine Blanking & Tool Co EBITDA Margin % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Fine Blanking & Tool Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Fine Blanking & Tool Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Fine Blanking & Tool Co (ROCO:4535) has a EBITDA Margin % of 17.95% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Fine Blanking & Tool Co and its competitors. This is near median its historical median of 17.27. Over the past decade, Fine Blanking & Tool Co's EBITDA Margin % has ranged from 13.85 to 18.84. According to the industry distribution chart, Fine Blanking & Tool Co ranks #241 out of 1320 companies in the Vehicles & Parts industry, placing it in the top 18.3%.
Is Fine Blanking & Tool Co's EBITDA Margin % too high?
Fine Blanking & Tool Co's current EBITDA Margin % of 17.95% is near median its 10-year median of 17.27. Over the past 10 years, this metric has ranged from a low of 13.85 to a high of 18.84. The Vehicles & Parts industry median EBITDA Margin % is 8.96. Fine Blanking & Tool Co's value of 17.95% is 100.3% above this industry median. Based on the distribution chart, Fine Blanking & Tool Co ranks #241 out of 1320 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, Fine Blanking & Tool Co has a GF Score™ of 81/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Fine Blanking & Tool Co's EBITDA Margin % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Fine Blanking & Tool Co ranks #241 out of 1320 companies for EBITDA Margin %. This places Fine Blanking & Tool Co in the top 18% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 8.96. Fine Blanking & Tool Co's value of 17.95% is 100.3% above this benchmark. Historically, Fine Blanking & Tool Co's own EBITDA Margin % has ranged from 13.85 to 18.84 over the past decade. While the company's 10-year median is 17.27 vs. the industry median of 8.96, Fine Blanking & Tool Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Vehicles & Parts company?
The median EBITDA Margin % among Vehicles & Parts companies is 8.96, based on 1,320 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Fine Blanking & Tool Co's current EBITDA Margin % of 17.95% is 100.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Fine Blanking & Tool Co and its competitors. For the Vehicles & Parts industry, the median EBITDA Margin % is 8.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Fine Blanking & Tool Co's current EBITDA Margin % is 17.95%, which is near median its own 10-year median of 17.27. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Fine Blanking & Tool Co stock overvalued right now?
Based on GuruFocus' analysis, Fine Blanking & Tool Co (ROCO:4535) is currently considered Fairly Valued. The stock's GF Value™ is NT$28.40, compared to a current price of NT$28.00 — trading 1.4% below its estimated fair value. The current EBITDA Margin % is 17.95%, which is near median its 10-year median of 17.27 and 100.3% above the Vehicles & Parts industry median of 8.96. Fine Blanking & Tool Co's overall GF Score™ is 81/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Fine Blanking & Tool Co (ROCO:4535), the current EBITDA Margin % is 17.95% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Fine Blanking & Tool Co (ROCO:4535) Overvalued in 2026?
Based on GuruFocus' analysis, Fine Blanking & Tool Co stock appears to be undervalued.
The current stock price of NT$28.00 is trading 1.4% below its estimated GF Value™ of NT$28.40.
GuruFocus considers Fine Blanking & Tool Co to be Fairly Valued.
Key valuation signals for ROCO:4535:
EBITDA Margin %: 17.95% (near median its 10-year median of 17.27)
GF Value™: NT$28.40 vs. price of NT$28.00 (1.4% below fair value)
Industry Position: 100.3% above the Vehicles & Parts median (#241 of 1320)
No single metric tells the full story. See the ROCO:4535 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Fine Blanking & Tool Co Ltd is a Taiwan-based manufacturer and seller of automobile and motorcycle parts, and various molds. Its product portfolio includes auto parts, locomotive stamping parts, bicycle parts, Fine blanking parts, and off-road. The group operates in two segments that include Domestic Operations and Overseas Operations. The majority of revenue is generated from the Overseas Operations segment, which is engaged in the manufacturing, processing, and production of various products and precision stamping parts for automobiles, motorcycles, and special vehicles. Geographically, the company derives key revenue from Asia (excluding Taiwan) and the rest from America, Europe, and Taiwan.
81GF Score
Get the complete analysis for ROCO:4535
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4535 has been successfully added to your 
