Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Fine Blanking & Tool CoROCO:4535 +0.18%79 5-Year Yield-on-Cost % is 5.69 as of Aug. 20, 2026, which is 47% below its 10-year median of 10.67. GuruFocus rates ROCO:4535 with a GF Score™ of 79/100 and a GF Value™ of NT$27.76 (Fairly Valued). The stock has 4 warning signs investors should review. Among 846 Vehicles & Parts companies, Fine Blanking & Tool Co ranks better than 70.33% on this metric.
The historical rank and industry rank for Fine Blanking & Tool Co's 5-Year Yield-on-Cost % or its related term are showing as below:
ROCO:4535'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 3.88 Med: 10.67 Max: 24.25
Current: 5.69
During the past 13 years, Fine Blanking & Tool Co's highest Yield on Cost was 24.25. The lowest was 3.88. And the median was 10.67.
ROCO:4535's 5-Year Yield-on-Cost % is ranked better than 70.33% of 846
companies
in the Vehicles & Parts industry
Industry Median: 3.06
vs ROCO:4535: 5.69
Fine Blanking & Tool Co (ROCO:4535) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Fine Blanking & Tool Co 5-Year Yield-on-Cost % Related Terms
ROCO:4535 vs ORLY, AZO: 5-Year Yield-on-Cost % Comparison
For the Auto Parts subindustry, Fine Blanking & Tool Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Fine Blanking & Tool Co 5-Year Yield-on-Cost % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Fine Blanking & Tool Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Fine Blanking & Tool Co's 5-Year Yield-on-Cost % falls into.
Fine Blanking & Tool Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Fine Blanking & Tool Co (ROCO:4535) has a 5-Year Yield-on-Cost % of 5.69 as of Aug. 20, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Fine Blanking & Tool Co and its competitors. This is 47% below median its historical median of 10.67. Over the past decade, Fine Blanking & Tool Co's 5-Year Yield-on-Cost % has ranged from 3.88 to 24.25. According to the industry distribution chart, Fine Blanking & Tool Co ranks #251 out of 846 companies in the Vehicles & Parts industry, placing it in the top 29.7%.
Is Fine Blanking & Tool Co's 5-Year Yield-on-Cost % too high?
Fine Blanking & Tool Co's current 5-Year Yield-on-Cost % of 5.69 is 47% below median its 10-year median of 10.67. Over the past 10 years, this metric has ranged from a low of 3.88 to a high of 24.25. The Vehicles & Parts industry median 5-Year Yield-on-Cost % is 3.06. Fine Blanking & Tool Co's value of 5.69 is 85.9% above this industry median. Based on the distribution chart, Fine Blanking & Tool Co ranks #251 out of 846 companies in the Vehicles & Parts industry, which is above the industry midpoint. Overall, Fine Blanking & Tool Co has a GF Score™ of 79/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Fine Blanking & Tool Co's 5-Year Yield-on-Cost % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Fine Blanking & Tool Co ranks #251 out of 846 companies for 5-Year Yield-on-Cost %. This puts Fine Blanking & Tool Co in the upper half of its industry. The industry median 5-Year Yield-on-Cost % is 3.06. Fine Blanking & Tool Co's value of 5.69 is 85.9% above this benchmark. Historically, Fine Blanking & Tool Co's own 5-Year Yield-on-Cost % has ranged from 3.88 to 24.25 over the past decade. While the company's 10-year median is 10.67 vs. the industry median of 3.06, Fine Blanking & Tool Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Vehicles & Parts company?
The median 5-Year Yield-on-Cost % among Vehicles & Parts companies is 3.06, based on 846 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Fine Blanking & Tool Co's current 5-Year Yield-on-Cost % of 5.69 is 85.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Fine Blanking & Tool Co and its competitors. For the Vehicles & Parts industry, the median 5-Year Yield-on-Cost % is 3.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Fine Blanking & Tool Co's current 5-Year Yield-on-Cost % is 5.69, which is 47% below median its own 10-year median of 10.67. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Fine Blanking & Tool Co stock overvalued right now?
Based on GuruFocus' analysis, Fine Blanking & Tool Co (ROCO:4535) is currently considered Fairly Valued. The stock's GF Value™ is NT$27.76, compared to a current price of NT$28.50 — trading 2.7% above its estimated fair value. The current 5-Year Yield-on-Cost % is 5.69, which is 47% below median its 10-year median of 10.67 and 85.9% above the Vehicles & Parts industry median of 3.06. Fine Blanking & Tool Co's overall GF Score™ is 79/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Fine Blanking & Tool Co (ROCO:4535), the current 5-Year Yield-on-Cost % is 5.69 as of Aug. 20, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Fine Blanking & Tool Co (ROCO:4535) Overvalued in 2026?
Based on GuruFocus' analysis, Fine Blanking & Tool Co stock appears to be overvalued.
The current stock price of NT$28.50 is trading 2.7% above its estimated GF Value™ of NT$27.76.
GuruFocus considers Fine Blanking & Tool Co to be Fairly Valued.
Key valuation signals for ROCO:4535:
5-Year Yield-on-Cost %: 5.69 (47% below median its 10-year median of 10.67)
GF Value™: NT$27.76 vs. price of NT$28.50 (2.7% above fair value)
Industry Position: 85.9% above the Vehicles & Parts median (#251 of 846)
No single metric tells the full story. See the ROCO:4535 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Fine Blanking & Tool Co Ltd is a Taiwan-based manufacturer and seller of automobile and motorcycle parts, and various molds. Its product portfolio includes auto parts, locomotive stamping parts, bicycle parts, Fine blanking parts, and off-road. The group operates in two segments that include Domestic Operations and Overseas Operations. The majority of revenue is generated from the Overseas Operations segment, which is engaged in the manufacturing, processing, and production of various products and precision stamping parts for automobiles, motorcycles, and special vehicles. Geographically, the company derives key revenue from Asia (excluding Taiwan) and the rest from America, Europe, and Taiwan.
79GF Score
Get the complete analysis for ROCO:4535
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4535 has been successfully added to your 
