Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Fine Blanking & Tool Co has a quick ratio of 5.45. It generally indicates good short-term financial strength.
The historical rank and industry rank for Fine Blanking & Tool Co's Quick Ratio or its related term are showing as below:
ROCO:4535'
s Quick Ratio Range Over the Past 10 Years
Min: 2.29 Med: 3.37 Max: 5.45
Current: 5.45
During the past 13 years, Fine Blanking & Tool Co's highest Quick Ratio was 5.45. The lowest was 2.29. And the median was 3.37.
ROCO:4535's Quick Ratio is ranked better than 96.24% of 1331
companies
in the Vehicles & Parts industry
Industry Median: 1.06
vs ROCO:4535: 5.45
Fine Blanking & Tool Co (ROCO:4535) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Fine Blanking & Tool Co Quick Ratio Related Terms
Fine Blanking & Tool Co Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Fine Blanking & Tool Co's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Fine Blanking & Tool Co Quick Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Fine Blanking & Tool Co's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Fine Blanking & Tool Co's Quick Ratio falls into.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
Fine Blanking & Tool Co's Quick Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Fine Blanking & Tool Co (ROCO:4535) has a Quick Ratio of 5.45 as of Dec. 2025. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Fine Blanking & Tool Co and its competitors. This is 62% above median its historical median of 3.37. Over the past decade, Fine Blanking & Tool Co's Quick Ratio has ranged from 2.29 to 5.45. According to the industry distribution chart, Fine Blanking & Tool Co ranks #50 out of 1331 companies in the Vehicles & Parts industry, placing it in the top 3.8%.
Is Fine Blanking & Tool Co's Quick Ratio too high?
Fine Blanking & Tool Co's current Quick Ratio of 5.45 is 62% above median its 10-year median of 3.37. Over the past 10 years, this metric has ranged from a low of 2.29 to a high of 5.45. The Vehicles & Parts industry median Quick Ratio is 1.06. Fine Blanking & Tool Co's value of 5.45 is 414.2% above this industry median. Based on the distribution chart, Fine Blanking & Tool Co ranks #50 out of 1331 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, Fine Blanking & Tool Co has a GF Score™ of 81/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Fine Blanking & Tool Co's Quick Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Fine Blanking & Tool Co ranks #50 out of 1331 companies for Quick Ratio. This places Fine Blanking & Tool Co in the top 4% of its industry — outperforming the majority of peers. The industry median Quick Ratio is 1.06. Fine Blanking & Tool Co's value of 5.45 is 414.2% above this benchmark. Historically, Fine Blanking & Tool Co's own Quick Ratio has ranged from 2.29 to 5.45 over the past decade. While the company's 10-year median is 3.37 vs. the industry median of 1.06, Fine Blanking & Tool Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Vehicles & Parts company?
The median Quick Ratio among Vehicles & Parts companies is 1.06, based on 1,331 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Fine Blanking & Tool Co's current Quick Ratio of 5.45 is 414.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Fine Blanking & Tool Co and its competitors. For the Vehicles & Parts industry, the median Quick Ratio is 1.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Fine Blanking & Tool Co's current Quick Ratio is 5.45, which is 62% above median its own 10-year median of 3.37. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Fine Blanking & Tool Co stock overvalued right now?
Based on GuruFocus' analysis, Fine Blanking & Tool Co (ROCO:4535) is currently considered Fairly Valued. The stock's GF Value™ is NT$28.40, compared to a current price of NT$28.00 — trading 1.4% below its estimated fair value. The current Quick Ratio is 5.45, which is 62% above median its 10-year median of 3.37 and 414.2% above the Vehicles & Parts industry median of 1.06. Fine Blanking & Tool Co's overall GF Score™ is 81/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Fine Blanking & Tool Co (ROCO:4535), the current Quick Ratio is 5.45 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Fine Blanking & Tool Co (ROCO:4535) Overvalued in 2026?
Based on GuruFocus' analysis, Fine Blanking & Tool Co stock appears to be undervalued.
The current stock price of NT$28.00 is trading 1.4% below its estimated GF Value™ of NT$28.40.
GuruFocus considers Fine Blanking & Tool Co to be Fairly Valued.
Key valuation signals for ROCO:4535:
Quick Ratio: 5.45 (62% above median its 10-year median of 3.37)
GF Value™: NT$28.40 vs. price of NT$28.00 (1.4% below fair value)
Industry Position: 414.2% above the Vehicles & Parts median (#50 of 1331)
No single metric tells the full story. See the ROCO:4535 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Fine Blanking & Tool Co Ltd is a Taiwan-based manufacturer and seller of automobile and motorcycle parts, and various molds. Its product portfolio includes auto parts, locomotive stamping parts, bicycle parts, Fine blanking parts, and off-road. The group operates in two segments that include Domestic Operations and Overseas Operations. The majority of revenue is generated from the Overseas Operations segment, which is engaged in the manufacturing, processing, and production of various products and precision stamping parts for automobiles, motorcycles, and special vehicles. Geographically, the company derives key revenue from Asia (excluding Taiwan) and the rest from America, Europe, and Taiwan.
81GF Score
Get the complete analysis for ROCO:4535
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4535 has been successfully added to your 
