Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Strong H Machinery Technology Co's Debt-to-EBITDA or its related term are showing as below:
TPE:4560'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.14 Med: 0.44 Max: 3.48
Current: 0.3
During the past 12 years, the highest Debt-to-EBITDA Ratio of Strong H Machinery Technology Co was 3.48. The lowest was 0.14. And the median was 0.44.
TPE:4560's Debt-to-EBITDA is ranked better than 81.72% of 2331
companies
in the Industrial Products industry
Industry Median: 1.68
vs TPE:4560: 0.30
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Strong H Machinery Technology Co Debt-to-EBITDA Related Terms
Strong H Machinery Technology Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Strong H Machinery Technology Co Debt-to-EBITDA Chart
TPE:4560 vs SNA, RBC, SWK: Debt-to-EBITDA Comparison
For the Tools & Accessories subindustry, Strong H Machinery Technology Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Strong H Machinery Technology Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Strong H Machinery Technology Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Strong H Machinery Technology Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Strong H Machinery Technology Co (TPE:4560) has a Debt-to-EBITDA of 0.28 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Strong H Machinery Technology Co. This is 36% below median its historical median of 0.44. Over the past decade, Strong H Machinery Technology Co's Debt-to-EBITDA has ranged from 0.14 to 3.48. According to the industry distribution chart, Strong H Machinery Technology Co ranks #426 out of 2331 companies in the Industrial Products industry, placing it in the top 18.3%.
Is Strong H Machinery Technology Co's Debt-to-EBITDA too high?
Strong H Machinery Technology Co's current Debt-to-EBITDA of 0.28 is 36% below median its 10-year median of 0.44. Over the past 10 years, this metric has ranged from a low of 0.14 to a high of 3.48. The Industrial Products industry median Debt-to-EBITDA is 1.68. Strong H Machinery Technology Co's value of 0.28 is 83.3% below this industry median. Based on the distribution chart, Strong H Machinery Technology Co ranks #426 out of 2331 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Strong H Machinery Technology Co has a GF Score™ of 88/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Strong H Machinery Technology Co's Debt-to-EBITDA compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Strong H Machinery Technology Co ranks #426 out of 2331 companies for Debt-to-EBITDA. This places Strong H Machinery Technology Co in the top 18% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 1.68. Strong H Machinery Technology Co's value of 0.28 is 83.3% below this benchmark. Historically, Strong H Machinery Technology Co's own Debt-to-EBITDA has ranged from 0.14 to 3.48 over the past decade. While the company's 10-year median is 0.44 vs. the industry median of 1.68, Strong H Machinery Technology Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.68, based on 2,331 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Strong H Machinery Technology Co's current Debt-to-EBITDA of 0.28 is 83.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Strong H Machinery Technology Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.68 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Strong H Machinery Technology Co's current Debt-to-EBITDA is 0.28, which is 36% below median its own 10-year median of 0.44. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Strong H Machinery Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Strong H Machinery Technology Co (TPE:4560) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$40.59, compared to a current price of NT$32.45 — trading 20.1% below its estimated fair value. The current Debt-to-EBITDA is 0.28, which is 36% below median its 10-year median of 0.44 and 83.3% below the Industrial Products industry median of 1.68. Strong H Machinery Technology Co's overall GF Score™ is 88/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Strong H Machinery Technology Co (TPE:4560), the current Debt-to-EBITDA is 0.28 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Strong H Machinery Technology Co (TPE:4560) Overvalued in 2026?
Based on GuruFocus' analysis, Strong H Machinery Technology Co stock appears to be undervalued.
The current stock price of NT$32.45 is trading 20.1% below its estimated GF Value™ of NT$40.59.
GuruFocus considers Strong H Machinery Technology Co to be Modestly Undervalued.
Key valuation signals for TPE:4560:
Debt-to-EBITDA: 0.28 (36% below median its 10-year median of 0.44)
GF Value™: NT$40.59 vs. price of NT$32.45 (20.1% below fair value)
Industry Position: 83.3% below the Industrial Products median (#426 of 2331)
No single metric tells the full story. See the TPE:4560 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Strong H Machinery Technology Co is a professional precision machining manufacturer. The company mainly produces and sells industrial sewing machine parts for assembly by machine manufacturers and repair by end users. It offers various types of industrial sewing machine knives to customers, including needle plates, teeth, presser feet, and needle embroidery machine knives. Its products include industrial sewing machine knives, straight knives, round knives, gauge sets, needle plate shear lines, and computerized embroidery machine parts. The Group's only reportable segment is the sewing machine spare parts segment, as the Group's main activities are manufacturing and selling sewing machine spare parts. The company operates in China and Taiwan, with the majority of revenue coming from China.
88GF Score
Get the complete analysis for TPE:4560
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4560 has been successfully added to your 
