Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Strong H Machinery Technology CoTPE:4560 +0.16%90 5-Year Yield-on-Cost % is 2.78 as of Jul. 30, 2026, which is 35% above its 10-year median of 2.06. GuruFocus rates TPE:4560 with a GF Score™ of 90/100 and a GF Value™ of NT$40.60 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 1,913 Industrial Products companies, Strong H Machinery Technology Co ranks better than 60.79% on this metric.
The historical rank and industry rank for Strong H Machinery Technology Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TPE:4560'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.02 Med: 2.06 Max: 4.42
Current: 2.78
During the past 12 years, Strong H Machinery Technology Co's highest Yield on Cost was 4.42. The lowest was 1.02. And the median was 2.06.
TPE:4560's 5-Year Yield-on-Cost % is ranked better than 60.79% of 1913
companies
in the Industrial Products industry
Industry Median: 1.96
vs TPE:4560: 2.78
Strong H Machinery Technology Co (TPE:4560) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Strong H Machinery Technology Co 5-Year Yield-on-Cost % Related Terms
TPE:4560 vs SNA, RBC, SWK: 5-Year Yield-on-Cost % Comparison
For the Tools & Accessories subindustry, Strong H Machinery Technology Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Strong H Machinery Technology Co 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Strong H Machinery Technology Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Strong H Machinery Technology Co's 5-Year Yield-on-Cost % falls into.
Strong H Machinery Technology Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Strong H Machinery Technology Co (TPE:4560) has a 5-Year Yield-on-Cost % of 2.78 as of Jul. 30, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Strong H Machinery Technology Co and its competitors. This is 35% above median its historical median of 2.06. Over the past decade, Strong H Machinery Technology Co's 5-Year Yield-on-Cost % has ranged from 1.02 to 4.42. According to the industry distribution chart, Strong H Machinery Technology Co ranks #750 out of 1913 companies in the Industrial Products industry, placing it in the top 39.2%.
Is Strong H Machinery Technology Co's 5-Year Yield-on-Cost % too high?
Strong H Machinery Technology Co's current 5-Year Yield-on-Cost % of 2.78 is 35% above median its 10-year median of 2.06. Over the past 10 years, this metric has ranged from a low of 1.02 to a high of 4.42. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.96. Strong H Machinery Technology Co's value of 2.78 is 41.8% above this industry median. Based on the distribution chart, Strong H Machinery Technology Co ranks #750 out of 1913 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Strong H Machinery Technology Co has a GF Score™ of 90/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Strong H Machinery Technology Co's 5-Year Yield-on-Cost % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Strong H Machinery Technology Co ranks #750 out of 1913 companies for 5-Year Yield-on-Cost %. This puts Strong H Machinery Technology Co in the upper half of its industry. The industry median 5-Year Yield-on-Cost % is 1.96. Strong H Machinery Technology Co's value of 2.78 is 41.8% above this benchmark. Historically, Strong H Machinery Technology Co's own 5-Year Yield-on-Cost % has ranged from 1.02 to 4.42 over the past decade. While the company's 10-year median is 2.06 vs. the industry median of 1.96, Strong H Machinery Technology Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.96, based on 1,913 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Strong H Machinery Technology Co's current 5-Year Yield-on-Cost % of 2.78 is 41.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Strong H Machinery Technology Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Strong H Machinery Technology Co's current 5-Year Yield-on-Cost % is 2.78, which is 35% above median its own 10-year median of 2.06. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Strong H Machinery Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Strong H Machinery Technology Co (TPE:4560) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$40.60, compared to a current price of NT$31.45 — trading 22.5% below its estimated fair value. The current 5-Year Yield-on-Cost % is 2.78, which is 35% above median its 10-year median of 2.06 and 41.8% above the Industrial Products industry median of 1.96. Strong H Machinery Technology Co's overall GF Score™ is 90/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Strong H Machinery Technology Co (TPE:4560), the current 5-Year Yield-on-Cost % is 2.78 as of Jul. 30, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Strong H Machinery Technology Co (TPE:4560) Overvalued in 2026?
Based on GuruFocus' analysis, Strong H Machinery Technology Co stock appears to be undervalued.
The current stock price of NT$31.45 is trading 22.5% below its estimated GF Value™ of NT$40.60.
GuruFocus considers Strong H Machinery Technology Co to be Modestly Undervalued.
Key valuation signals for TPE:4560:
5-Year Yield-on-Cost %: 2.78 (35% above median its 10-year median of 2.06)
GF Value™: NT$40.60 vs. price of NT$31.45 (22.5% below fair value)
Industry Position: 41.8% above the Industrial Products median (#750 of 1913)
No single metric tells the full story. See the TPE:4560 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Strong H Machinery Technology Co Business Description
Strong H Machinery Technology Co is a professional precision machining manufacturer. The company mainly produces and sells industrial sewing machine parts for assembly by machine manufacturers and repair by end users. It offers various types of industrial sewing machine knives to customers, including needle plates, teeth, presser feet, and needle embroidery machine knives. Its products include industrial sewing machine knives, straight knives, round knives, gauge sets, needle plate shear lines, and computerized embroidery machine parts. The Group's only reportable segment is the sewing machine spare parts segment, as the Group's main activities are manufacturing and selling sewing machine spare parts. The company operates in China and Taiwan, with the majority of revenue coming from China.
90GF Score
Get the complete analysis for TPE:4560
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4560 has been successfully added to your 
