Strong H Machinery Technology CoTPE:4560 +1.07%85 Dividend Yield % is 3.68% as of Jun. 26, 2026, which is 23% below its 10-year median of 4.75. GuruFocus rates TPE:4560 with a GF Score™ of 85/100 and a GF Value™ of NT$40.31 (Modestly Undervalued). The stock has 2 warning signs investors should review. Among 1,925 Industrial Products companies, Strong H Machinery Technology Co ranks better than 84.21% on this metric.
During the past 12 years, the highest Dividend Payout Ratio of Strong H Machinery Technology Co was 3.27. The lowest was 0.32. And the median was 0.51.
During the past 12 months, Strong H Machinery Technology Co's average Dividends Per Share Growth Rate was 20.00% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was -12.60% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was -15.30% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Strong H Machinery Technology Co (TPE:4560) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Strong H Machinery Technology Co Dividend Yield % Chart
TPE:4560 vs SNA, RBC, LECO: Dividend Yield % Comparison
For the Tools & Accessories subindustry, Strong H Machinery Technology Co's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Strong H Machinery Technology Co Dividend Yield % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Strong H Machinery Technology Co's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Strong H Machinery Technology Co's Dividend Yield % falls into.
Strong H Machinery Technology Co Dividend Yield % Calculation
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Strong H Machinery Technology Co Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
TWD 1.200000
2025-07-30
2025-07-31
2025-08-20
Cash Dividend
annually
TWD:TWD 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Strong H Machinery Technology Co (TPE:4560) has a Dividend Yield % of 3.68% as of Jun. 26, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on Strong H Machinery Technology Co and its competitors. This is 23% below median its historical median of 4.75. Over the past decade, Strong H Machinery Technology Co's Dividend Yield % has ranged from 2.33 to 10.13. According to the industry distribution chart, Strong H Machinery Technology Co ranks #304 out of 1925 companies in the Industrial Products industry, placing it in the top 15.8%.
Is Strong H Machinery Technology Co's Dividend Yield % too high?
Strong H Machinery Technology Co's current Dividend Yield % of 3.68% is 23% below median its 10-year median of 4.75. Over the past 10 years, this metric has ranged from a low of 2.33 to a high of 10.13. The Industrial Products industry median Dividend Yield % is 1.37. Strong H Machinery Technology Co's value of 3.68% is 168.6% above this industry median. Based on the distribution chart, Strong H Machinery Technology Co ranks #304 out of 1925 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Strong H Machinery Technology Co has a GF Score™ of 85/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Strong H Machinery Technology Co's Dividend Yield % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Strong H Machinery Technology Co ranks #304 out of 1925 companies for Dividend Yield %. This places Strong H Machinery Technology Co in the top 16% of its industry — outperforming the majority of peers. The industry median Dividend Yield % is 1.37. Strong H Machinery Technology Co's value of 3.68% is 168.6% above this benchmark. Historically, Strong H Machinery Technology Co's own Dividend Yield % has ranged from 2.33 to 10.13 over the past decade. While the company's 10-year median is 4.75 vs. the industry median of 1.37, Strong H Machinery Technology Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for an Industrial Products company?
The median Dividend Yield % among Industrial Products companies is 1.37, based on 1,925 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Strong H Machinery Technology Co's current Dividend Yield % of 3.68% is 168.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on Strong H Machinery Technology Co and its competitors. For the Industrial Products industry, the median Dividend Yield % is 1.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Strong H Machinery Technology Co's current Dividend Yield % is 3.68%, which is 23% below median its own 10-year median of 4.75. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Strong H Machinery Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Strong H Machinery Technology Co (TPE:4560) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$40.31, compared to a current price of NT$32.95 — trading 18.3% below its estimated fair value. The current Dividend Yield % is 3.68%, which is 23% below median its 10-year median of 4.75 and 168.6% above the Industrial Products industry median of 1.37. Strong H Machinery Technology Co's overall GF Score™ is 85/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For Strong H Machinery Technology Co (TPE:4560), the current Dividend Yield % is 3.68% as of Jun. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Strong H Machinery Technology Co (TPE:4560) Overvalued in 2026?
Based on GuruFocus' analysis, Strong H Machinery Technology Co stock appears to be undervalued.
The current stock price of NT$32.95 is trading 18.3% below its estimated GF Value™ of NT$40.31.
GuruFocus considers Strong H Machinery Technology Co to be Modestly Undervalued.
Key valuation signals for TPE:4560:
Dividend Yield %: 3.68% (23% below median its 10-year median of 4.75)
GF Value™: NT$40.31 vs. price of NT$32.95 (18.3% below fair value)
Industry Position: 168.6% above the Industrial Products median (#304 of 1925)
No single metric tells the full story. See the TPE:4560 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Strong H Machinery Technology Co Business Description
Strong H Machinery Technology Co is a professional precision machining manufacturer. The company mainly produces and sells industrial sewing machine parts for assembly by machine manufacturers and repair by end users. It offers various types of industrial sewing machine knives to customers, including needle plates, teeth, presser feet, and needle embroidery machine knives. Its products include industrial sewing machine knives, straight knives, round knives, gauge sets, needle plate shear lines, and computerized embroidery machine parts. The Group's only reportable segment is the sewing machine spare parts segment, as the Group's main activities are manufacturing and selling sewing machine spare parts. The company operates in China and Taiwan, with the majority of revenue coming from China.
85GF Score
Get the complete analysis for TPE:4560
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4560 has been successfully added to your 
