Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Makino Milling Machine CoMKMLF 78 Debt-to-Equity is 0.20 as of Mar. 2026, which is 26% below its 10-year median of 0.27. GuruFocus rates MKMLF with a GF Score™ of 78/100 and a GF Value™ of $29.09 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 2,682 Industrial Products companies, Makino Milling Machine Co ranks better than 59.69% on this metric.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for Makino Milling Machine Co's Debt-to-Equity or its related term are showing as below:
MKMLF'
s Debt-to-Equity Range Over the Past 10 Years
Min: 0.2 Med: 0.27 Max: 0.44
Current: 0.2
During the past 13 years, the highest Debt-to-Equity Ratio of Makino Milling Machine Co was 0.44. The lowest was 0.20. And the median was 0.27.
MKMLF's Debt-to-Equity is ranked better than 59.69% of 2682
companies
in the Industrial Products industry
Industry Median: 0.28
vs MKMLF: 0.20
Makino Milling Machine Co (OTCPK:MKMLF) Debt-to-Equity Explanation
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
Makino Milling Machine Co Debt-to-Equity Related Terms
Makino Milling Machine Co Debt-to-Equity Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Makino Milling Machine Co's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Makino Milling Machine Co Debt-to-Equity vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Makino Milling Machine Co's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where Makino Milling Machine Co's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makino Milling Machine Co (MKMLF) has a Debt-to-Equity of 0.20 as of Mar. 2026. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Makino Milling Machine Co and its competitors. This is 26% below median its historical median of 0.27. Over the past decade, Makino Milling Machine Co's Debt-to-Equity has ranged from 0.20 to 0.44. According to the industry distribution chart, Makino Milling Machine Co ranks #1081 out of 2682 companies in the Industrial Products industry, placing it in the top 40.3%.
Is Makino Milling Machine Co's Debt-to-Equity too high?
Makino Milling Machine Co's current Debt-to-Equity of 0.20 is 26% below median its 10-year median of 0.27. Over the past 10 years, this metric has ranged from a low of 0.20 to a high of 0.44. The Industrial Products industry median Debt-to-Equity is 0.28. Makino Milling Machine Co's value of 0.20 is 28.6% below this industry median. Based on the distribution chart, Makino Milling Machine Co ranks #1081 out of 2682 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Makino Milling Machine Co has a GF Score™ of 78/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Makino Milling Machine Co's Debt-to-Equity compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Makino Milling Machine Co ranks #1081 out of 2682 companies for Debt-to-Equity. This puts Makino Milling Machine Co in the upper half of its industry. The industry median Debt-to-Equity is 0.28. Makino Milling Machine Co's value of 0.20 is 28.6% below this benchmark. Historically, Makino Milling Machine Co's own Debt-to-Equity has ranged from 0.20 to 0.44 over the past decade. While the company's 10-year median is 0.27 vs. the industry median of 0.28, Makino Milling Machine Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for an Industrial Products company?
The median Debt-to-Equity among Industrial Products companies is 0.28, based on 2,682 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Makino Milling Machine Co's current Debt-to-Equity of 0.20 is 28.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Makino Milling Machine Co and its competitors. For the Industrial Products industry, the median Debt-to-Equity is 0.28 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Makino Milling Machine Co's current Debt-to-Equity is 0.20, which is 26% below median its own 10-year median of 0.27. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Makino Milling Machine Co stock overvalued right now?
Based on GuruFocus' analysis, Makino Milling Machine Co (MKMLF) is currently considered Significantly Overvalued. The stock's GF Value™ is $29.09, compared to a current price of $90.16 — trading 209.9% above its estimated fair value. The current Debt-to-Equity is 0.20, which is 26% below median its 10-year median of 0.27 and 28.6% below the Industrial Products industry median of 0.28. Makino Milling Machine Co's overall GF Score™ is 78/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For Makino Milling Machine Co (MKMLF), the current Debt-to-Equity is 0.20 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Makino Milling Machine Co (MKMLF) Overvalued in 2026?
Based on GuruFocus' analysis, Makino Milling Machine Co stock appears to be overvalued.
The current stock price of $90.16 is trading 209.9% above its estimated GF Value™ of $29.09.
GuruFocus considers Makino Milling Machine Co to be Significantly Overvalued.
Key valuation signals for MKMLF:
Debt-to-Equity: 0.20 (26% below median its 10-year median of 0.27)
GF Value™: $29.09 vs. price of $90.16 (209.9% above fair value)
Industry Position: 28.6% below the Industrial Products median (#1081 of 2682)
No single metric tells the full story. See the MKMLF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Makino Milling Machine Co Ltd is a software and engineering service provider offering machine tool builders. The company manufactures, sells and exports machines. It offers numeric control (NC) electrical discharge machines, NC milling machines, milling machines, computer-aided design (CAD) computer-aided manufacturing (CAM) systems, and other products. Its product application is spread into various industries such as automotive, aerospace, general machining, medical and construction. The firm also engages in the business of equipment financing.
78GF Score
Get the complete analysis for MKMLF
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MKMLF has been successfully added to your 
