Makino Milling Machine CoMKMLF 78 Net Debt Paydown Yield % is 1.57% as of Jul. 07, 2026, which is 11% below its 10-year median of 1.77. GuruFocus rates MKMLF with a GF Scoreâ„¢ of 78/100 and a GF Valueâ„¢ of $28.95 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 2,837 Industrial Products companies, Makino Milling Machine Co ranks better than 77.83% on this metric.
Net Debt Paydown Yield % is a metric that evaluates the total amount of debt a company has paid in relation to its market capitalization. It is a measure of a company's willingness and ability to reduce its debt.
As of today, Makino Milling Machine Co's Net Debt Paydown Yield % was 1.57%.
Makino Milling Machine Co (OTCPK:MKMLF) Net Debt Paydown Yield % Explanation
Net Debt Paydown Yield % is the change in average of four quarters of company's total debt over a company's market cap. Assuming the total value of a company remains that same, shareholder value is increased as debt is reduced. In other words, it is a measure of the willingness and ability of a firm's management to pay down debt. Companies that have high debt paydown yields indicate that they are more aggressive with paying down debt.
In the calculation of Net Debt Paydown Yield %, we use the reductions of TTM average total debt one-year-ago and TTM average total debt at present, divided by its Market Cap.
Makino Milling Machine Co Net Debt Paydown Yield % Related Terms
Makino Milling Machine Co Net Debt Paydown Yield % Historical Data
* Premium members only.
The historical data trend for Makino Milling Machine Co's Net Debt Paydown Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makino Milling Machine Co Net Debt Paydown Yield % Chart
MKMLF vs GEV, ETN, PH: Net Debt Paydown Yield % Comparison
For the Specialty Industrial Machinery subindustry, Makino Milling Machine Co's Net Debt Paydown Yield %, along with its competitors' market caps and Net Debt Paydown Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Makino Milling Machine Co Net Debt Paydown Yield % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Makino Milling Machine Co's Net Debt Paydown Yield % distribution charts can be found below:
* The bar in red indicates where Makino Milling Machine Co's Net Debt Paydown Yield % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* All the data are calculated by TTM values. Note that if a companies is traded in several exchanges, then we calculate the company level data for Net Debt Paydown Yield % using the primary share class stock data. The calculation result in definition page is for demonstration purpose only, and it's showing the share class level data. Therefore, the numbers in the calculation may differ from elsewhere if the stock is not a primary share.
What does a Net Debt Paydown Yield % of 1.57% mean?
Makino Milling Machine Co (MKMLF) has a Net Debt Paydown Yield % of 1.57% as of Jul. 07, 2026. Net Debt Paydown Yield is a metric that evaluates the total amount of debt a company has paid in relation to its market capitalization. This metric provides insight into a company's willingness and ability to reduce its debt using free cash flow. View historical data on Makino Milling Machine Co and its competitors. This is 11% below median its historical median of 1.77. According to the industry distribution chart, Makino Milling Machine Co ranks #629 out of 2837 companies in the Industrial Products industry, placing it in the top 22.2%.
Is Makino Milling Machine Co's Net Debt Paydown Yield % too high?
Makino Milling Machine Co's current Net Debt Paydown Yield % of 1.57% is 11% below median its 10-year median of 1.77. Based on the distribution chart, Makino Milling Machine Co ranks #629 out of 2837 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Makino Milling Machine Co has a GF Score™ of 78/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Makino Milling Machine Co's Net Debt Paydown Yield % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Makino Milling Machine Co ranks #629 out of 2837 companies for Net Debt Paydown Yield %. This places Makino Milling Machine Co in the top 22% of its industry — outperforming the majority of peers. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Net Debt Paydown Yield % for an Industrial Products company?
A good Net Debt Paydown Yield % depends on the Industrial Products industry context. However, Net Debt Paydown Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Net Debt Paydown Yield % mean?
A high Net Debt Paydown Yield % can signal that a stock is expensive relative to its fundamentals. Net Debt Paydown Yield is a metric that evaluates the total amount of debt a company has paid in relation to its market capitalization. This metric provides insight into a company's willingness and ability to reduce its debt using free cash flow. View historical data on Makino Milling Machine Co and its competitors. Makino Milling Machine Co's current Net Debt Paydown Yield % is 1.57%, which is 11% below median its own 10-year median of 1.77. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Makino Milling Machine Co stock overvalued right now?
Based on GuruFocus' analysis, Makino Milling Machine Co (MKMLF) is currently considered Significantly Overvalued. The stock's GF Value™ is $28.95, compared to a current price of $97.75 — trading 237.7% above its estimated fair value. The current Net Debt Paydown Yield % is 1.57%, which is 11% below median its 10-year median of 1.77. Makino Milling Machine Co's overall GF Score™ is 78/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Net Debt Paydown Yield % calculated?
Net Debt Paydown Yield % is calculated from a company's financial statements. For Makino Milling Machine Co (MKMLF), the current Net Debt Paydown Yield % is 1.57% as of Jul. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Makino Milling Machine Co (MKMLF) Overvalued in 2026?
Based on GuruFocus' analysis, Makino Milling Machine Co stock appears to be overvalued.
The current stock price of $97.75 is trading 237.7% above its estimated GF Value™ of $28.95.
GuruFocus considers Makino Milling Machine Co to be Significantly Overvalued.
Key valuation signals for MKMLF:
Net Debt Paydown Yield %: 1.57% (11% below median its 10-year median of 1.77)
GF Value™: $28.95 vs. price of $97.75 (237.7% above fair value)
No single metric tells the full story. See the MKMLF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Makino Milling Machine Co Ltd is a software and engineering service provider offering machine tool builders. The company manufactures, sells and exports machines. It offers numeric control (NC) electrical discharge machines, NC milling machines, milling machines, computer-aided design (CAD) computer-aided manufacturing (CAM) systems, and other products. Its product application is spread into various industries such as automotive, aerospace, general machining, medical and construction. The firm also engages in the business of equipment financing.
78GF Score
Get the complete analysis for MKMLF
Net Debt Paydown Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MKMLF has been successfully added to your 
