Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Makino Milling Machine CoMKMLF 78 Owner Earnings per Share (TTM) is 0.00 as of Mar. 2026. GuruFocus rates MKMLF with a GF Score™ of 78/100 and a GF Value™ of $29.08 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 1,468 Industrial Products companies, Makino Milling Machine Co ranks worse than 68119.82% on this metric.
"These represent (a) reported earnings plus (b) depreciation, depletion, amortization, and certain other non-cash charges...less (c) the average annual amount of capitalized expenditures for plant and equipment, etc. that the business requires to fully maintain its long-term competitive position and its unit volume (If the business requires additional working capital to maintain its competitive position and unit volume, the increment also should be included in (c))...Our owner-earnings equation does not yield the deceptively precise figures provided by GAAP, since (c) must be a guess - and one sometimes very difficult to make. Despite this problem, we consider the owner earnings figure, not the GAAP figure, to be the relevant item for valuation purposes - both for investors in buying stocks and for managers in buying entire businesses...All of this points up the absurdity of the 'cash flow' numbers that are often set forth in Wall Street reports. These numbers routinely include (a) plus (b) - but do not subtract (c)."
Makino Milling Machine Co does not have enough data to calculate Owner Earnings per Share (TTM), so as Price-to-Owner-Earnings ratio.
The historical rank and industry rank for Makino Milling Machine Co's Owner Earnings per Share (TTM) or its related term are showing as below:
MKMLF's Price-to-Owner-Earnings is not ranked *
in the Industrial Products industry.
Industry Median: 27 * Ranked among companies with meaningful Price-to-Owner-Earnings only.
Assumption: Companies usually do not report maintenance capital expenditures and growth capital expenditures separately. Here we use estimated numbers and average them over 5 years. The method to estimate maintenance capital expenditures can be found in above part 4.
Note: GuruFocus' Change In Working Capital is provided by Morningstar. It is calculated by adding the items under "Change in operating assets and liabilities" (may refer to a different name for different company) section in Cash Flow Statement from original financial report. And it includes non-current parts of assets and liabilities.
Makino Milling Machine Co Owner Earnings per Share (TTM) Related Terms
Makino Milling Machine Co Owner Earnings per Share (TTM) Historical Data
* Premium members only.
The historical data trend for Makino Milling Machine Co's Owner Earnings per Share (TTM) can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Makino Milling Machine Co Owner Earnings per Share (TTM) Chart
MKMLF vs GEV, ETN, PH: Owner Earnings per Share (TTM) Comparison
For the Specialty Industrial Machinery subindustry, Makino Milling Machine Co's Price-to-Owner-Earnings, along with its competitors' market caps and Price-to-Owner-Earnings data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Makino Milling Machine Co Price-to-Owner-Earnings vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Makino Milling Machine Co's Price-to-Owner-Earnings distribution charts can be found below:
* The bar in red indicates where Makino Milling Machine Co's Price-to-Owner-Earnings falls into.
"These represent (a) reported earnings plus (b) depreciation, depletion, amortization, and certain other non-cash charges...less (c) the average annual amount of capitalized expenditures for plant and equipment, etc. that the business requires to fully maintain its long-term competitive position and its unit volume. (If the business requires additional working capital to maintain its competitive position and unit volume, the increment also should be included in (c))...Our owner-earnings equation does not yield the deceptively precise figures provided by GAAP, since (c) must be a guess - and one sometimes very difficult to make. Despite this problem, we consider the owner earnings figure, not the GAAP figure, to be the relevant item for valuation purposes - both for investors in buying stocks and for managers in buying entire businesses...All of this points up the absurdity of the 'cash flow' numbers that are often set forth in Wall Street reports. These numbers routinely include (a) plus (b) - but do not subtract (c)."
What does a Owner Earnings per Share (TTM) of 0.00 mean?
Makino Milling Machine Co (MKMLF) has a Owner Earnings per Share (TTM) of 0.00 as of Mar. 2026. Warren Buffett defined owner earnings as reported earnings plus depreciation less average maintenance capital expenditure. View historical data on Makino Milling Machine Co. Over the past decade, Makino Milling Machine Co's Owner Earnings per Share (TTM) has ranged from 9.37 to 10.57. According to the industry distribution chart, Makino Milling Machine Co ranks #999999 out of 1468 companies in the Industrial Products industry.
Is Makino Milling Machine Co's Owner Earnings per Share (TTM) too high?
Makino Milling Machine Co's current Owner Earnings per Share (TTM) is 0.00. Over the past 10 years, this metric has ranged from a low of 9.37 to a high of 10.57. Based on the distribution chart, Makino Milling Machine Co ranks #999999 out of 1468 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Makino Milling Machine Co has a GF Score™ of 78/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Makino Milling Machine Co's Owner Earnings per Share (TTM) compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Makino Milling Machine Co ranks #999999 out of 1468 companies for Owner Earnings per Share (TTM). This places Makino Milling Machine Co in the lower half of its industry. The industry median Owner Earnings per Share (TTM) is 27.00. Historically, Makino Milling Machine Co's own Owner Earnings per Share (TTM) has ranged from 9.37 to 10.57 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Owner Earnings per Share (TTM) for an Industrial Products company?
The median Owner Earnings per Share (TTM) among Industrial Products companies is 27.00, based on 1,468 companies in the industry. Companies in the top quartile (top 25%) have a Owner Earnings per Share (TTM) significantly above this median, while those in the bottom quartile fall well below. However, Owner Earnings per Share (TTM) should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Owner Earnings per Share (TTM) mean?
A high Owner Earnings per Share (TTM) can signal that a stock is expensive relative to its fundamentals. Warren Buffett defined owner earnings as reported earnings plus depreciation less average maintenance capital expenditure. View historical data on Makino Milling Machine Co. For the Industrial Products industry, the median Owner Earnings per Share (TTM) is 27.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Makino Milling Machine Co's current Owner Earnings per Share (TTM) is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Makino Milling Machine Co stock overvalued right now?
Based on GuruFocus' analysis, Makino Milling Machine Co (MKMLF) is currently considered Significantly Overvalued. The stock's GF Value™ is $29.08, compared to a current price of $90.16 — trading 210% above its estimated fair value. The current Owner Earnings per Share (TTM) is 0.00. Makino Milling Machine Co's overall GF Score™ is 78/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Owner Earnings per Share (TTM) calculated?
Owner Earnings per Share (TTM) is calculated from a company's financial statements. For Makino Milling Machine Co (MKMLF), the current Owner Earnings per Share (TTM) is 0.00 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Makino Milling Machine Co (MKMLF) Overvalued in 2026?
Based on GuruFocus' analysis, Makino Milling Machine Co stock appears to be overvalued.
The current stock price of $90.16 is trading 210% above its estimated GF Value™ of $29.08.
GuruFocus considers Makino Milling Machine Co to be Significantly Overvalued.
Key valuation signals for MKMLF:
Owner Earnings per Share (TTM): 0.00
GF Value™: $29.08 vs. price of $90.16 (210% above fair value)
No single metric tells the full story. See the MKMLF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Makino Milling Machine Co Ltd is a software and engineering service provider offering machine tool builders. The company manufactures, sells and exports machines. It offers numeric control (NC) electrical discharge machines, NC milling machines, milling machines, computer-aided design (CAD) computer-aided manufacturing (CAM) systems, and other products. Its product application is spread into various industries such as automotive, aerospace, general machining, medical and construction. The firm also engages in the business of equipment financing.
78GF Score
Get the complete analysis for MKMLF
Owner Earnings per Share (TTM) is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MKMLF has been successfully added to your 
