Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Makino Milling Machine CoMKMLF 74 3-Year EBITDA Growth Rate is 11.10% as of Mar. 2026, which is at its 10-year median of 11.10. GuruFocus rates MKMLF with a GF Score™ of 74/100 and a GF Value™ of $51.03 (Significantly Overvalued). The stock has 4 warning signs investors should review. Among 2,591 Industrial Products companies, Makino Milling Machine Co ranks better than 62.91% on this metric.
During the past 12 months, Makino Milling Machine Co's average EBITDA Per Share Growth Rate was 29.20% per year.
During the past 3 years, the average EBITDA Per Share Growth Rate was 11.10% per year.
During the past 5 years, the average EBITDA Per Share Growth Rate was 38.60% per year.
During the past 10 years, the average EBITDA Per Share Growth Rate was 6.50% per year.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EBITDA per share growth rate.
During the past 13 years, the highest 3-Year average EBITDA Per Share Growth Rate of Makino Milling Machine Co was 82.30% per year. The lowest was -41.30% per year. And the median was 11.10% per year.
Makino Milling Machine Co (OTCPK:MKMLF) 3-Year EBITDA Growth Rate Explanation
EBITDA per Share is the amount of Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) per outstanding share of the company's stock.
Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) is what the company earns before it expenses interest, taxes, depreciation and amortization.
Makino Milling Machine Co 3-Year EBITDA Growth Rate Related Terms
MKMLF vs GEV, ETN, PH: 3-Year EBITDA Growth Rate Comparison
For the Specialty Industrial Machinery subindustry, Makino Milling Machine Co's 3-Year EBITDA Growth Rate, along with its competitors' market caps and 3-Year EBITDA Growth Rate data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Makino Milling Machine Co 3-Year EBITDA Growth Rate vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Makino Milling Machine Co's 3-Year EBITDA Growth Rate distribution charts can be found below:
* The bar in red indicates where Makino Milling Machine Co's 3-Year EBITDA Growth Rate falls into.
Makino Milling Machine Co 3-Year EBITDA Growth Rate Calculation
This is the 3-year average growth rate of EBITDA per Share. The growth rate is calculated using exponential compounding based on the latest four year annual data.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EBITDA per share growth rate.
What does a 3-Year EBITDA Growth Rate of 11.10% mean?
Makino Milling Machine Co (MKMLF) has a 3-Year EBITDA Growth Rate of 11.10% as of Mar. 2026. 3-Year EBITDA Growth Rate is the 3-year average growth rate of EBITDA per share. View historical data for Makino Milling Machine Co and its competitors. This is near median its historical median of 11.10. According to the industry distribution chart, Makino Milling Machine Co ranks #961 out of 2591 companies in the Industrial Products industry, placing it in the top 37.1%.
Is Makino Milling Machine Co's 3-Year EBITDA Growth Rate too high?
Makino Milling Machine Co's current 3-Year EBITDA Growth Rate of 11.10% is near median its 10-year median of 11.10. The Industrial Products industry median 3-Year EBITDA Growth Rate is 4.40. Makino Milling Machine Co's value of 11.10% is 152.3% above this industry median. Based on the distribution chart, Makino Milling Machine Co ranks #961 out of 2591 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Makino Milling Machine Co has a GF Score™ of 74/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Makino Milling Machine Co's 3-Year EBITDA Growth Rate compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Makino Milling Machine Co ranks #961 out of 2591 companies for 3-Year EBITDA Growth Rate. This puts Makino Milling Machine Co in the upper half of its industry. The industry median 3-Year EBITDA Growth Rate is 4.40. Makino Milling Machine Co's value of 11.10% is 152.3% above this benchmark. While the company's 10-year median is 11.10 vs. the industry median of 4.40, Makino Milling Machine Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 3-Year EBITDA Growth Rate for an Industrial Products company?
The median 3-Year EBITDA Growth Rate among Industrial Products companies is 4.40, based on 2,591 companies in the industry. Companies in the top quartile (top 25%) have a 3-Year EBITDA Growth Rate significantly above this median, while those in the bottom quartile fall well below. However, 3-Year EBITDA Growth Rate should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Makino Milling Machine Co's current 3-Year EBITDA Growth Rate of 11.10% is 152.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 3-Year EBITDA Growth Rate mean?
A high 3-Year EBITDA Growth Rate can signal that a stock is expensive relative to its fundamentals. 3-Year EBITDA Growth Rate is the 3-year average growth rate of EBITDA per share. View historical data for Makino Milling Machine Co and its competitors. For the Industrial Products industry, the median 3-Year EBITDA Growth Rate is 4.40 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Makino Milling Machine Co's current 3-Year EBITDA Growth Rate is 11.10%, which is near median its own 10-year median of 11.10. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Makino Milling Machine Co stock overvalued right now?
Based on GuruFocus' analysis, Makino Milling Machine Co (MKMLF) is currently considered Significantly Overvalued. The stock's GF Value™ is $51.03, compared to a current price of $90.16 — trading 76.7% above its estimated fair value. The current 3-Year EBITDA Growth Rate is 11.10%, which is near median its 10-year median of 11.10 and 152.3% above the Industrial Products industry median of 4.40. Makino Milling Machine Co's overall GF Score™ is 74/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 3-Year EBITDA Growth Rate calculated?
3-Year EBITDA Growth Rate is calculated from a company's financial statements. For Makino Milling Machine Co (MKMLF), the current 3-Year EBITDA Growth Rate is 11.10% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Makino Milling Machine Co (MKMLF) Overvalued in 2026?
Based on GuruFocus' analysis, Makino Milling Machine Co stock appears to be overvalued.
The current stock price of $90.16 is trading 76.7% above its estimated GF Value™ of $51.03.
GuruFocus considers Makino Milling Machine Co to be Significantly Overvalued.
Key valuation signals for MKMLF:
3-Year EBITDA Growth Rate: 11.10% (near median its 10-year median of 11.10)
GF Value™: $51.03 vs. price of $90.16 (76.7% above fair value)
Industry Position: 152.3% above the Industrial Products median (#961 of 2591)
No single metric tells the full story. See the MKMLF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Makino Milling Machine Co Ltd is a software and engineering service provider offering machine tool builders. The company manufactures, sells and exports machines. It offers numeric control (NC) electrical discharge machines, NC milling machines, milling machines, computer-aided design (CAD) computer-aided manufacturing (CAM) systems, and other products. Its product application is spread into various industries such as automotive, aerospace, general machining, medical and construction. The firm also engages in the business of equipment financing.
74GF Score
Get the complete analysis for MKMLF
3-Year EBITDA Growth Rate is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MKMLF has been successfully added to your 
