Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Falcon Machine Tools CoROCO:4513 +2.53%54 Debt-to-Equity is 1.76 as of Dec. 2025, which is 32% above its 10-year median of 1.33. GuruFocus rates ROCO:4513 with a GF Score™ of 54/100 and a GF Value™ of NT$14.06 (Modestly Overvalued). The stock has 7 warning signs investors should review. Among 2,692 Industrial Products companies, Falcon Machine Tools Co ranks worse than 91.68% on this metric.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for Falcon Machine Tools Co's Debt-to-Equity or its related term are showing as below:
ROCO:4513'
s Debt-to-Equity Range Over the Past 10 Years
Min: 0.7 Med: 1.33 Max: 1.76
Current: 1.31
During the past 13 years, the highest Debt-to-Equity Ratio of Falcon Machine Tools Co was 1.76. The lowest was 0.70. And the median was 1.33.
ROCO:4513's Debt-to-Equity is ranked worse than 91.68% of 2692
companies
in the Industrial Products industry
Industry Median: 0.29
vs ROCO:4513: 1.31
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
Falcon Machine Tools Co Debt-to-Equity Related Terms
Falcon Machine Tools Co Debt-to-Equity Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4513 vs GEV, ETN, PH: Debt-to-Equity Comparison
For the Specialty Industrial Machinery subindustry, Falcon Machine Tools Co's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Falcon Machine Tools Co Debt-to-Equity vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Falcon Machine Tools Co's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where Falcon Machine Tools Co's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Falcon Machine Tools Co (ROCO:4513) has a Debt-to-Equity of 1.76 as of Dec. 2025. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Falcon Machine Tools Co and its competitors. This is 32% above median its historical median of 1.33. Over the past decade, Falcon Machine Tools Co's Debt-to-Equity has ranged from 0.70 to 1.76. According to the industry distribution chart, Falcon Machine Tools Co ranks #2468 out of 2692 companies in the Industrial Products industry, placing it in the top 91.7%.
Is Falcon Machine Tools Co's Debt-to-Equity too high?
Falcon Machine Tools Co's current Debt-to-Equity of 1.76 is 32% above median its 10-year median of 1.33. Over the past 10 years, this metric has ranged from a low of 0.70 to a high of 1.76. The Industrial Products industry median Debt-to-Equity is 0.29. Falcon Machine Tools Co's value of 1.76 is 506.9% above this industry median. Based on the distribution chart, Falcon Machine Tools Co ranks #2468 out of 2692 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Falcon Machine Tools Co has a GF Score™ of 54/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Falcon Machine Tools Co's Debt-to-Equity compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Falcon Machine Tools Co ranks #2468 out of 2692 companies for Debt-to-Equity. This places Falcon Machine Tools Co in the lower half of its industry. The industry median Debt-to-Equity is 0.29. Falcon Machine Tools Co's value of 1.76 is 506.9% above this benchmark. Historically, Falcon Machine Tools Co's own Debt-to-Equity has ranged from 0.70 to 1.76 over the past decade. While the company's 10-year median is 1.33 vs. the industry median of 0.29, Falcon Machine Tools Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for an Industrial Products company?
The median Debt-to-Equity among Industrial Products companies is 0.29, based on 2,692 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Falcon Machine Tools Co's current Debt-to-Equity of 1.76 is 506.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Falcon Machine Tools Co and its competitors. For the Industrial Products industry, the median Debt-to-Equity is 0.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Falcon Machine Tools Co's current Debt-to-Equity is 1.76, which is 32% above median its own 10-year median of 1.33. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Falcon Machine Tools Co stock overvalued right now?
Based on GuruFocus' analysis, Falcon Machine Tools Co (ROCO:4513) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$14.06, compared to a current price of NT$16.20 — trading 15.2% above its estimated fair value. The current Debt-to-Equity is 1.76, which is 32% above median its 10-year median of 1.33 and 506.9% above the Industrial Products industry median of 0.29. Falcon Machine Tools Co's overall GF Score™ is 54/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For Falcon Machine Tools Co (ROCO:4513), the current Debt-to-Equity is 1.76 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Falcon Machine Tools Co (ROCO:4513) Overvalued in 2026?
Based on GuruFocus' analysis, Falcon Machine Tools Co stock appears to be overvalued.
The current stock price of NT$16.20 is trading 15.2% above its estimated GF Value™ of NT$14.06.
GuruFocus considers Falcon Machine Tools Co to be Modestly Overvalued.
Key valuation signals for ROCO:4513:
Debt-to-Equity: 1.76 (32% above median its 10-year median of 1.33)
GF Value™: NT$14.06 vs. price of NT$16.20 (15.2% above fair value)
Industry Position: 506.9% above the Industrial Products median (#2468 of 2692)
No single metric tells the full story. See the ROCO:4513 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Falcon Machine Tools Co Ltd manufactures and sells grinding, milling, turning machines, and other products. Its products include grinders, lathes, millers, planers, drill presses, and saw machines among others. It is also engaged in manufacturing and trading computer accessories and electronic parts, and the development, leasing, and sale of residential housing and buildings. The company's reportable segments include Taiwan Falcon which generates key revenue, Chevalier Machinery, Inc., Mainland Region, and others. Geographically, the company derives its key revenue from America and the rest from Mainland China, Taiwan, Europe, and other regions.
54GF Score
Get the complete analysis for ROCO:4513
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4513 has been successfully added to your 
