Falcon Machine Tools CoROCO:4513 -0.30%39 Altman Z-Score is 0.93 as of Jul. 07, 2026, which is 38% below its 10-year median of 1.49. GuruFocus rates ROCO:4513 with a GF Score™ of 39/100 and a GF Value™ of NT$16.76 (Fairly Valued). The stock has 7 warning signs investors should review. Among 3,007 Industrial Products companies, Falcon Machine Tools Co ranks worse than 89.62% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Warning Sign:
Altman Z-score of 0.93 is in distress zone. This implies bankruptcy possibility in the next two years.
Falcon Machine Tools Co has a Altman Z-Score of 0.93, indicating it is in Distress Zones. This implies bankrupcy possibility in the next two years.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Falcon Machine Tools Co's Altman Z-Score or its related term are showing as below:
ROCO:4513'
s Altman Z-Score Range Over the Past 10 Years
Min: 0.93 Med: 1.49 Max: 2.09
Current: 0.93
During the past 13 years, Falcon Machine Tools Co's highest Altman Z-Score was 2.09. The lowest was 0.93. And the median was 1.49.
Falcon Machine Tools Co (ROCO:4513) Altman Z-Score Explanation
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4513 vs GEV, ETN, PH: Altman Z-Score Comparison
For the Specialty Industrial Machinery subindustry, Falcon Machine Tools Co's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Falcon Machine Tools Co Altman Z-Score vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Falcon Machine Tools Co's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Falcon Machine Tools Co's Altman Z-Score falls into.
Falcon Machine Tools Co Altman Z-Score Calculation
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Falcon Machine Tools Co (ROCO:4513) has a Altman Z-Score of 0.93 as of Jul. 07, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Falcon Machine Tools Co and its competitors. This is 38% below median its historical median of 1.49. Over the past decade, Falcon Machine Tools Co's Altman Z-Score has ranged from 0.93 to 2.09. According to the industry distribution chart, Falcon Machine Tools Co ranks #2695 out of 3007 companies in the Industrial Products industry, placing it in the top 89.6%.
Is Falcon Machine Tools Co's Altman Z-Score too high?
Falcon Machine Tools Co's current Altman Z-Score of 0.93 is 38% below median its 10-year median of 1.49. Over the past 10 years, this metric has ranged from a low of 0.93 to a high of 2.09. The Industrial Products industry median Altman Z-Score is 3.40. Falcon Machine Tools Co's value of 0.93 is 72.6% below this industry median. Based on the distribution chart, Falcon Machine Tools Co ranks #2695 out of 3007 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Falcon Machine Tools Co has a GF Score™ of 39/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Falcon Machine Tools Co's Altman Z-Score compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Falcon Machine Tools Co ranks #2695 out of 3007 companies for Altman Z-Score. This places Falcon Machine Tools Co in the lower half of its industry. The industry median Altman Z-Score is 3.40. Falcon Machine Tools Co's value of 0.93 is 72.6% below this benchmark. Historically, Falcon Machine Tools Co's own Altman Z-Score has ranged from 0.93 to 2.09 over the past decade. While the company's 10-year median is 1.49 vs. the industry median of 3.40, Falcon Machine Tools Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for an Industrial Products company?
The median Altman Z-Score among Industrial Products companies is 3.40, based on 3,007 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Falcon Machine Tools Co's current Altman Z-Score of 0.93 is 72.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Falcon Machine Tools Co and its competitors. For the Industrial Products industry, the median Altman Z-Score is 3.40 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Falcon Machine Tools Co's current Altman Z-Score is 0.93, which is 38% below median its own 10-year median of 1.49. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Falcon Machine Tools Co stock overvalued right now?
Based on GuruFocus' analysis, Falcon Machine Tools Co (ROCO:4513) is currently considered Fairly Valued. The stock's GF Value™ is NT$16.76, compared to a current price of NT$16.65 — trading 0.7% below its estimated fair value. The current Altman Z-Score is 0.93, which is 38% below median its 10-year median of 1.49 and 72.6% below the Industrial Products industry median of 3.40. Falcon Machine Tools Co's overall GF Score™ is 39/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Falcon Machine Tools Co (ROCO:4513), the current Altman Z-Score is 0.93 as of Jul. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Falcon Machine Tools Co (ROCO:4513) Overvalued in 2026?
Based on GuruFocus' analysis, Falcon Machine Tools Co stock appears to be undervalued.
The current stock price of NT$16.65 is trading 0.7% below its estimated GF Value™ of NT$16.76.
GuruFocus considers Falcon Machine Tools Co to be Fairly Valued.
Key valuation signals for ROCO:4513:
Altman Z-Score: 0.93 (38% below median its 10-year median of 1.49)
GF Value™: NT$16.76 vs. price of NT$16.65 (0.7% below fair value)
Industry Position: 72.6% below the Industrial Products median (#2695 of 3007)
No single metric tells the full story. See the ROCO:4513 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Falcon Machine Tools Co Ltd manufactures and sells grinding, milling, turning machines, and other products. Its products include grinders, lathes, millers, planers, drill presses, and saw machines among others. It is also engaged in manufacturing and trading computer accessories and electronic parts, and the development, leasing, and sale of residential housing and buildings. The company's reportable segments include Taiwan Falcon which generates key revenue, Chevalier Machinery, Inc., Mainland Region, and others. Geographically, the company derives its key revenue from America and the rest from Mainland China, Taiwan, Europe, and other regions.
39GF Score
Get the complete analysis for ROCO:4513
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4513 has been successfully added to your 
