Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Indian Metals & Ferro AlloysNSE:IMFA -1.69%79 3-Year EBITDA Growth Rate is 12.10% as of Jun. 2026, which is 69% above its 10-year median of 7.15. GuruFocus rates NSE:IMFA with a GF Score™ of 79/100 and a GF Value™ of ₹923.56 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 2,116 Metals & Mining companies, Indian Metals & Ferro Alloys ranks worse than 56.57% on this metric.
During the past 12 months, Indian Metals & Ferro Alloys's average EBITDA Per Share Growth Rate was 40.80% per year.
During the past 3 years, the average EBITDA Per Share Growth Rate was 12.10% per year.
During the past 5 years, the average EBITDA Per Share Growth Rate was 5.50% per year.
During the past 10 years, the average EBITDA Per Share Growth Rate was 13.30% per year.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EBITDA per share growth rate.
During the past 13 years, the highest 3-Year average EBITDA Per Share Growth Rate of Indian Metals & Ferro Alloys was 80.30% per year. The lowest was -48.40% per year. And the median was 7.15% per year.
EBITDA per Share is the amount of Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) per outstanding share of the company's stock.
Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) is what the company earns before it expenses interest, taxes, depreciation and amortization.
Indian Metals & Ferro Alloys 3-Year EBITDA Growth Rate Related Terms
For the Other Industrial Metals & Mining subindustry, Indian Metals & Ferro Alloys's 3-Year EBITDA Growth Rate, along with its competitors' market caps and 3-Year EBITDA Growth Rate data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Indian Metals & Ferro Alloys 3-Year EBITDA Growth Rate vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Indian Metals & Ferro Alloys's 3-Year EBITDA Growth Rate distribution charts can be found below:
* The bar in red indicates where Indian Metals & Ferro Alloys's 3-Year EBITDA Growth Rate falls into.
Indian Metals & Ferro Alloys 3-Year EBITDA Growth Rate Calculation
This is the 3-year average growth rate of EBITDA per Share. The growth rate is calculated using exponential compounding based on the latest four year annual data.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EBITDA per share growth rate.
What does a 3-Year EBITDA Growth Rate of 12.10% mean?
Indian Metals & Ferro Alloys (NSE:IMFA) has a 3-Year EBITDA Growth Rate of 12.10% as of Jun. 2026. 3-Year EBITDA Growth Rate is the 3-year average growth rate of EBITDA per share. View historical data for Indian Metals & Ferro Alloys and its competitors. This is 69% above median its historical median of 7.15. According to the industry distribution chart, Indian Metals & Ferro Alloys ranks #1197 out of 2116 companies in the Metals & Mining industry, placing it in the top 56.6%.
Is Indian Metals & Ferro Alloys' 3-Year EBITDA Growth Rate too high?
Indian Metals & Ferro Alloys' current 3-Year EBITDA Growth Rate of 12.10% is 69% above median its 10-year median of 7.15. The Metals & Mining industry median 3-Year EBITDA Growth Rate is 15.75. Indian Metals & Ferro Alloys' value of 12.10% is 23.2% below this industry median. Based on the distribution chart, Indian Metals & Ferro Alloys ranks #1197 out of 2116 companies in the Metals & Mining industry, which is below the industry midpoint. Overall, Indian Metals & Ferro Alloys has a GF Score™ of 79/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Indian Metals & Ferro Alloys' 3-Year EBITDA Growth Rate compare to competitors?
According to the Metals & Mining industry distribution chart, Indian Metals & Ferro Alloys ranks #1197 out of 2116 companies for 3-Year EBITDA Growth Rate. This places Indian Metals & Ferro Alloys in the lower half of its industry. The industry median 3-Year EBITDA Growth Rate is 15.75. Indian Metals & Ferro Alloys' value of 12.10% is 23.2% below this benchmark. While the company's 10-year median is 7.15 vs. the industry median of 15.75, Indian Metals & Ferro Alloys has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 3-Year EBITDA Growth Rate for a Metals & Mining company?
The median 3-Year EBITDA Growth Rate among Metals & Mining companies is 15.75, based on 2,116 companies in the industry. Companies in the top quartile (top 25%) have a 3-Year EBITDA Growth Rate significantly above this median, while those in the bottom quartile fall well below. However, 3-Year EBITDA Growth Rate should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Indian Metals & Ferro Alloys's current 3-Year EBITDA Growth Rate of 12.10% is 23.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 3-Year EBITDA Growth Rate mean?
A high 3-Year EBITDA Growth Rate can signal that a stock is expensive relative to its fundamentals. 3-Year EBITDA Growth Rate is the 3-year average growth rate of EBITDA per share. View historical data for Indian Metals & Ferro Alloys and its competitors. For the Metals & Mining industry, the median 3-Year EBITDA Growth Rate is 15.75 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Indian Metals & Ferro Alloys's current 3-Year EBITDA Growth Rate is 12.10%, which is 69% above median its own 10-year median of 7.15. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Indian Metals & Ferro Alloys stock overvalued right now?
Based on GuruFocus' analysis, Indian Metals & Ferro Alloys (NSE:IMFA) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹923.56, compared to a current price of ₹1,238.00 — trading 34% above its estimated fair value. The current 3-Year EBITDA Growth Rate is 12.10%, which is 69% above median its 10-year median of 7.15 and 23.2% below the Metals & Mining industry median of 15.75. Indian Metals & Ferro Alloys' overall GF Score™ is 79/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 3-Year EBITDA Growth Rate calculated?
3-Year EBITDA Growth Rate is calculated from a company's financial statements. For Indian Metals & Ferro Alloys (NSE:IMFA), the current 3-Year EBITDA Growth Rate is 12.10% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Indian Metals & Ferro Alloys (NSE:IMFA) Overvalued in 2026?
Based on GuruFocus' analysis, Indian Metals & Ferro Alloys stock appears to be overvalued.
The current stock price of ₹1,238.00 is trading 34% above its estimated GF Value™ of ₹923.56.
GuruFocus considers Indian Metals & Ferro Alloys to be Significantly Overvalued.
Key valuation signals for NSE:IMFA:
3-Year EBITDA Growth Rate: 12.10% (69% above median its 10-year median of 7.15)
GF Value™: ₹923.56 vs. price of ₹1,238.00 (34% above fair value)
Industry Position: 23.2% below the Metals & Mining median (#1197 of 2116)
No single metric tells the full story. See the NSE:IMFA stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Indian Metals & Ferro Alloys Ltd is a producer of value-added ferrochrome in India, with operations spanning the entire value chain from captive chromite mining and power generation to smelting and exports of ferrochrome. The group's reportable segments are Ferro Alloys, Power, Mining, and All Other segments. The majority of its revenue is generated from the Ferro Alloys segment, which produces value-added ferrochrome, which has extensive applications in the manufacture of specialty alloys and stainless steels. Geographically, the majority of the group's revenue is generated through the exports of its products to its customers outside India in countries such as South Korea, China, Taiwan, Japan, and others.
79GF Score
Get the complete analysis for NSE:IMFA
3-Year EBITDA Growth Rate is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:IMFA has been successfully added to your 
