The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Indian Metals & Ferro Alloys's Dividend Payout Ratio for the
months ended in Mar. 2026 was 0.00.
The historical rank and industry rank for Indian Metals & Ferro Alloys's Dividend Payout Ratio or its related term are showing as below:
NSE:IMFA'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.06 Med: 0.21 Max: 0.51
Current: 0.13
During the past 13 years, the highest Dividend Payout Ratio of Indian Metals & Ferro Alloys was 0.51. The lowest was 0.06. And the median was 0.21.
NSE:IMFA's Dividend Payout Ratio is ranked better than 77.41% of 301
companies
in the Metals & Mining industry
Industry Median: 0.27
vs NSE:IMFA: 0.13
During the past 13 years, the highest Trailing Annual Dividend Yield of Indian Metals & Ferro Alloys was 6.77%. The lowest was 0.32%. And the median was 2.32%.
During the past 12 months, Indian Metals & Ferro Alloys's average Dividends Per Share Growth Rate was -55.60% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was -7.20% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 46.90% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was 23.50% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Indian Metals & Ferro Alloys was 102.70% per year. The lowest was -41.50% per year. And the median was -0.45% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Indian Metals & Ferro Alloys (NSE:IMFA) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Indian Metals & Ferro Alloys Dividend Payout Ratio Related Terms
Indian Metals & Ferro Alloys Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Indian Metals & Ferro Alloys Dividend Payout Ratio Chart
Indian Metals & Ferro Alloys Dividend Payout Ratio Competitor Comparison
For the Other Industrial Metals & Mining subindustry, Indian Metals & Ferro Alloys's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Indian Metals & Ferro Alloys Dividend Payout Ratio vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Indian Metals & Ferro Alloys's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Indian Metals & Ferro Alloys's Dividend Payout Ratio falls into.
Indian Metals & Ferro Alloys Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Indian Metals & Ferro Alloys's Dividend Payout Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Indian Metals & Ferro Alloys (NSE:IMFA) has a Dividend Payout Ratio of 0.00 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Indian Metals & Ferro Alloys and its competitors. Over the past decade, Indian Metals & Ferro Alloys' Dividend Payout Ratio has ranged from 0.06 to 0.51. According to the industry distribution chart, Indian Metals & Ferro Alloys ranks #68 out of 301 companies in the Metals & Mining industry, placing it in the top 22.6%.
Is Indian Metals & Ferro Alloys' Dividend Payout Ratio too high?
Indian Metals & Ferro Alloys' current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.06 to a high of 0.51. Based on the distribution chart, Indian Metals & Ferro Alloys ranks #68 out of 301 companies in the Metals & Mining industry, which is in the top quartile — a strong position relative to peers. Overall, Indian Metals & Ferro Alloys has a GF Score™ of 65/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Indian Metals & Ferro Alloys' Dividend Payout Ratio compare to competitors?
According to the Metals & Mining industry distribution chart, Indian Metals & Ferro Alloys ranks #68 out of 301 companies for Dividend Payout Ratio. This places Indian Metals & Ferro Alloys in the top 23% of its industry — outperforming the majority of peers. The industry median Dividend Payout Ratio is 0.27. Historically, Indian Metals & Ferro Alloys' own Dividend Payout Ratio has ranged from 0.06 to 0.51 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Metals & Mining company?
The median Dividend Payout Ratio among Metals & Mining companies is 0.27, based on 301 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Indian Metals & Ferro Alloys and its competitors. For the Metals & Mining industry, the median Dividend Payout Ratio is 0.27 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Indian Metals & Ferro Alloys's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Indian Metals & Ferro Alloys stock overvalued right now?
Based on GuruFocus' analysis, Indian Metals & Ferro Alloys (NSE:IMFA) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹840.73, compared to a current price of ₹1,374.50 — trading 63.5% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Indian Metals & Ferro Alloys' overall GF Score™ is 65/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Indian Metals & Ferro Alloys (NSE:IMFA), the current Dividend Payout Ratio is 0.00 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Indian Metals & Ferro Alloys (NSE:IMFA) Overvalued in 2026?
Based on GuruFocus' analysis, Indian Metals & Ferro Alloys stock appears to be overvalued.
The current stock price of ₹1,374.50 is trading 63.5% above its estimated GF Value™ of ₹840.73.
GuruFocus considers Indian Metals & Ferro Alloys to be Significantly Overvalued.
Key valuation signals for NSE:IMFA:
Dividend Payout Ratio: 0.00
GF Value™: ₹840.73 vs. price of ₹1,374.50 (63.5% above fair value)
No single metric tells the full story. See the NSE:IMFA stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Indian Metals & Ferro Alloys Ltd is a producer of value-added ferrochrome in India, with operations spanning the entire value chain from captive chromite mining and power generation to smelting and exports of ferrochrome. The group's reportable segments are Ferro Alloys, Power, Mining, and All Other segments. The majority of its revenue is generated from the Ferro Alloys segment, which produces value-added ferrochrome, which has extensive applications in the manufacture of specialty alloys and stainless steels. Geographically, the majority of the group's revenue is generated through the exports of its products to its customers outside India in countries such as South Korea, China, Taiwan, Japan, and others.
65GF Score
Get the complete analysis for NSE:IMFA
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:IMFA has been successfully added to your 
