Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Eson Precision Ind CoTPE:5243 -3.98%86 3-Year EBITDA Growth Rate is 0.20% as of Jun. 2026, which is 96% below its 10-year median of 4.90. GuruFocus rates TPE:5243 with a GF Score™ of 86/100 and a GF Value™ of NT$65.38 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 2,025 Hardware companies, Eson Precision Ind Co ranks worse than 52.69% on this metric.
During the past 12 months, Eson Precision Ind Co's average EBITDA Per Share Growth Rate was 13.30% per year.
During the past 3 years, the average EBITDA Per Share Growth Rate was 0.20% per year.
During the past 5 years, the average EBITDA Per Share Growth Rate was 10.60% per year.
During the past 10 years, the average EBITDA Per Share Growth Rate was 8.00% per year.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EBITDA per share growth rate.
During the past 13 years, the highest 3-Year average EBITDA Per Share Growth Rate of Eson Precision Ind Co was 16.60% per year. The lowest was -38.20% per year. And the median was 4.90% per year.
Eson Precision Ind Co (TPE:5243) 3-Year EBITDA Growth Rate Explanation
EBITDA per Share is the amount of Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) per outstanding share of the company's stock.
Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) is what the company earns before it expenses interest, taxes, depreciation and amortization.
Eson Precision Ind Co 3-Year EBITDA Growth Rate Related Terms
TPE:5243 vs APH, GLW, TEL: 3-Year EBITDA Growth Rate Comparison
For the Electronic Components subindustry, Eson Precision Ind Co's 3-Year EBITDA Growth Rate, along with its competitors' market caps and 3-Year EBITDA Growth Rate data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Eson Precision Ind Co 3-Year EBITDA Growth Rate vs Hardware Industry
For the Hardware industry and Technology sector, Eson Precision Ind Co's 3-Year EBITDA Growth Rate distribution charts can be found below:
* The bar in red indicates where Eson Precision Ind Co's 3-Year EBITDA Growth Rate falls into.
Eson Precision Ind Co 3-Year EBITDA Growth Rate Calculation
This is the 3-year average growth rate of EBITDA per Share. The growth rate is calculated using exponential compounding based on the latest four year annual data.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EBITDA per share growth rate.
What does a 3-Year EBITDA Growth Rate of 0.20% mean?
Eson Precision Ind Co (TPE:5243) has a 3-Year EBITDA Growth Rate of 0.20% as of Jun. 2026. 3-Year EBITDA Growth Rate is the 3-year average growth rate of EBITDA per share. View historical data for Eson Precision Ind Co and its competitors. This is 96% below median its historical median of 4.90. According to the industry distribution chart, Eson Precision Ind Co ranks #1067 out of 2025 companies in the Hardware industry, placing it in the top 52.7%.
Is Eson Precision Ind Co's 3-Year EBITDA Growth Rate too high?
Eson Precision Ind Co's current 3-Year EBITDA Growth Rate of 0.20% is 96% below median its 10-year median of 4.90. The Hardware industry median 3-Year EBITDA Growth Rate is 2.00. Eson Precision Ind Co's value of 0.20% is 90% below this industry median. Based on the distribution chart, Eson Precision Ind Co ranks #1067 out of 2025 companies in the Hardware industry, which is below the industry midpoint. Overall, Eson Precision Ind Co has a GF Score™ of 86/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Eson Precision Ind Co's 3-Year EBITDA Growth Rate compare to APH and GLW?
According to the Hardware industry distribution chart, Eson Precision Ind Co ranks #1067 out of 2025 companies for 3-Year EBITDA Growth Rate. This places Eson Precision Ind Co in the lower half of its industry. The industry median 3-Year EBITDA Growth Rate is 2.00. Eson Precision Ind Co's value of 0.20% is 90% below this benchmark. While the company's 10-year median is 4.90 vs. the industry median of 2.00, Eson Precision Ind Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 3-Year EBITDA Growth Rate for a Hardware company?
The median 3-Year EBITDA Growth Rate among Hardware companies is 2.00, based on 2,025 companies in the industry. Companies in the top quartile (top 25%) have a 3-Year EBITDA Growth Rate significantly above this median, while those in the bottom quartile fall well below. However, 3-Year EBITDA Growth Rate should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Eson Precision Ind Co's current 3-Year EBITDA Growth Rate of 0.20% is 90% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 3-Year EBITDA Growth Rate mean?
A high 3-Year EBITDA Growth Rate can signal that a stock is expensive relative to its fundamentals. 3-Year EBITDA Growth Rate is the 3-year average growth rate of EBITDA per share. View historical data for Eson Precision Ind Co and its competitors. For the Hardware industry, the median 3-Year EBITDA Growth Rate is 2.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Eson Precision Ind Co's current 3-Year EBITDA Growth Rate is 0.20%, which is 96% below median its own 10-year median of 4.90. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Eson Precision Ind Co stock overvalued right now?
Based on GuruFocus' analysis, Eson Precision Ind Co (TPE:5243) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$65.38, compared to a current price of NT$91.60 — trading 40.1% above its estimated fair value. The current 3-Year EBITDA Growth Rate is 0.20%, which is 96% below median its 10-year median of 4.90 and 90% below the Hardware industry median of 2.00. Eson Precision Ind Co's overall GF Score™ is 86/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 3-Year EBITDA Growth Rate calculated?
3-Year EBITDA Growth Rate is calculated from a company's financial statements. For Eson Precision Ind Co (TPE:5243), the current 3-Year EBITDA Growth Rate is 0.20% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Eson Precision Ind Co (TPE:5243) Overvalued in 2026?
Based on GuruFocus' analysis, Eson Precision Ind Co stock appears to be overvalued.
The current stock price of NT$91.60 is trading 40.1% above its estimated GF Value™ of NT$65.38.
GuruFocus considers Eson Precision Ind Co to be Significantly Overvalued.
Key valuation signals for TPE:5243:
3-Year EBITDA Growth Rate: 0.20% (96% below median its 10-year median of 4.90)
GF Value™: NT$65.38 vs. price of NT$91.60 (40.1% above fair value)
Industry Position: 90% below the Hardware median (#1067 of 2025)
No single metric tells the full story. See the TPE:5243 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Eson Precision Ind Co Ltd mainly designs, develops, manufactures, and sells molds, plastic, hardware products, and new types of electronic components and flat-panel displays. The company operates in the design, development, manufacture, and sales segments of products such as molds, plastics, and hardware goods as individual operating segments. The Group's revenue from continuing operations from its products and services is Automobile mechanical parts, Network communication mechanical parts, Mechanical components for consumer electronics, and Others. Geographically, it operates in China, Asia, the Americas, and other regions.
86GF Score
Get the complete analysis for TPE:5243
3-Year EBITDA Growth Rate is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:5243 has been successfully added to your 
