Eson Precision Ind CoTPE:5243 +0.49%80 Gross Margin % is 20.92% as of Dec. 2025, which is 29% above its 10-year median of 16.19. GuruFocus rates TPE:5243 with a GF Score™ of 80/100 and a GF Value™ of NT$58.32 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 2,453 Hardware companies, Eson Precision Ind Co ranks worse than 57.81% on this metric.
TPE:5243's Gross Margin % is ranked worse than 57.81% of 2453
companies
in the Hardware industry
Industry Median: 24.52
vs TPE:5243: 21.31
Eson Precision Ind Co had a gross margin of 20.92% for the quarter that ended in Dec. 2025 => Competition eroding margins
The 5-Year average Growth Rate of Gross Margin for Eson Precision Ind Co was 5.80% per year.
Eson Precision Ind Co (TPE:5243) Gross Margin % Explanation
Warren Buffett believes that firms with excellent long term economics tend to have consistently higher margins.
Durable competitive advantage creates a high Gross Margin % because of the freedom to price in excess of cost. Companies can be categorized by their Gross Margin %
1. Greater than 40% = Durable competitive advantage
2. Less than 40% = Competition eroding margins
3. Less than 20% = no sustainable competitive advantage
Consistency of Gross Margin is key
Eson Precision Ind Co had a gross margin of 20.92% for the quarter that ended in Dec. 2025 => Competition eroding margins
Be Aware
If a company loses its competitive advantages, usually its gross margin declines well before its sales declines. Watching Gross Margin % and Operating Margin % closely helps avoid value trap situations.
Eson Precision Ind Co Gross Margin % Related Terms
Eson Precision Ind Co Gross Margin % Historical Data
* Premium members only.
The historical data trend for Eson Precision Ind Co's Gross Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, Eson Precision Ind Co's Gross Margin %, along with its competitors' market caps and Gross Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Eson Precision Ind Co Gross Margin % vs Hardware Industry
For the Hardware industry and Technology sector, Eson Precision Ind Co's Gross Margin % distribution charts can be found below:
* The bar in red indicates where Eson Precision Ind Co's Gross Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
A positive Gross Profit is only the first step for a company to make a net profit. The gross profit needs to be big enough to also cover related labor, equipment, rental, marketing/advertising, research and development and a lot of other costs in selling the products.
Eson Precision Ind Co (TPE:5243) has a Gross Margin % of 20.92% as of Dec. 2025. Gross margin is the ratio of total gross profit to net sales. View historical data on Eson Precision Ind Co and its competitors. This is 29% above median its historical median of 16.19. Over the past decade, Eson Precision Ind Co's Gross Margin % has ranged from 13.15 to 21.31. According to the industry distribution chart, Eson Precision Ind Co ranks #1418 out of 2453 companies in the Hardware industry, placing it in the top 57.8%.
Is Eson Precision Ind Co's Gross Margin % too high?
Eson Precision Ind Co's current Gross Margin % of 20.92% is 29% above median its 10-year median of 16.19. Over the past 10 years, this metric has ranged from a low of 13.15 to a high of 21.31. The Hardware industry median Gross Margin % is 24.52. Eson Precision Ind Co's value of 20.92% is 14.7% below this industry median. Based on the distribution chart, Eson Precision Ind Co ranks #1418 out of 2453 companies in the Hardware industry, which is below the industry midpoint. Overall, Eson Precision Ind Co has a GF Score™ of 80/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Eson Precision Ind Co's Gross Margin % compare to APH and GLW?
According to the Hardware industry distribution chart, Eson Precision Ind Co ranks #1418 out of 2453 companies for Gross Margin %. This places Eson Precision Ind Co in the lower half of its industry. The industry median Gross Margin % is 24.52. Eson Precision Ind Co's value of 20.92% is 14.7% below this benchmark. Historically, Eson Precision Ind Co's own Gross Margin % has ranged from 13.15 to 21.31 over the past decade. While the company's 10-year median is 16.19 vs. the industry median of 24.52, Eson Precision Ind Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Gross Margin % for a Hardware company?
The median Gross Margin % among Hardware companies is 24.52, based on 2,453 companies in the industry. Companies in the top quartile (top 25%) have a Gross Margin % significantly above this median, while those in the bottom quartile fall well below. However, Gross Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Eson Precision Ind Co's current Gross Margin % of 20.92% is 14.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Gross Margin % mean?
A high Gross Margin % can signal that a stock is expensive relative to its fundamentals. Gross margin is the ratio of total gross profit to net sales. View historical data on Eson Precision Ind Co and its competitors. For the Hardware industry, the median Gross Margin % is 24.52 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Eson Precision Ind Co's current Gross Margin % is 20.92%, which is 29% above median its own 10-year median of 16.19. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Eson Precision Ind Co stock overvalued right now?
Based on GuruFocus' analysis, Eson Precision Ind Co (TPE:5243) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$58.32, compared to a current price of NT$102.50 — trading 75.8% above its estimated fair value. The current Gross Margin % is 20.92%, which is 29% above median its 10-year median of 16.19 and 14.7% below the Hardware industry median of 24.52. Eson Precision Ind Co's overall GF Score™ is 80/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Gross Margin % calculated?
Gross Margin % is calculated from a company's financial statements. For Eson Precision Ind Co (TPE:5243), the current Gross Margin % is 20.92% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Eson Precision Ind Co (TPE:5243) Overvalued in 2026?
Based on GuruFocus' analysis, Eson Precision Ind Co stock appears to be overvalued.
The current stock price of NT$102.50 is trading 75.8% above its estimated GF Value™ of NT$58.32.
GuruFocus considers Eson Precision Ind Co to be Significantly Overvalued.
Key valuation signals for TPE:5243:
Gross Margin %: 20.92% (29% above median its 10-year median of 16.19)
GF Value™: NT$58.32 vs. price of NT$102.50 (75.8% above fair value)
Industry Position: 14.7% below the Hardware median (#1418 of 2453)
No single metric tells the full story. See the TPE:5243 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Eson Precision Ind Co Ltd mainly designs, develops, manufactures, and sells molds, plastic, hardware products, and new types of electronic components and flat-panel displays. The company operates in the design, development, manufacture, and sales segments of products such as molds, plastics, and hardware goods as individual operating segments. The Group's revenue from continuing operations from its products and services is Automobile mechanical parts, Network communication mechanical parts, Mechanical components for consumer electronics, and Others. Geographically, it operates in China, Asia, the Americas, and other regions.
80GF Score
Get the complete analysis for TPE:5243
Gross Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:5243 has been successfully added to your 
