Eson Precision Ind CoTPE:5243 +0.49%80 PEG Ratio is 2.14 as of Jul. 05, 2026, which is 3% below its 10-year median of 2.21. GuruFocus rates TPE:5243 with a GF Score™ of 80/100 and a GF Value™ of NT$58.32 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 856 Hardware companies, Eson Precision Ind Co ranks better than 51.87% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Eson Precision Ind Co's PEG Ratio or its related term are showing as below:
TPE:5243'
s PEG Ratio Range Over the Past 10 Years
Min: 0.93 Med: 2.21 Max: 234
Current: 2.14
During the past 13 years, Eson Precision Ind Co's highest PEG Ratio was 234.00. The lowest was 0.93. And the median was 2.21.
TPE:5243's PEG Ratio is ranked better than 51.87% of 856
companies
in the Hardware industry
Industry Median: 2.285
vs TPE:5243: 2.14
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Eson Precision Ind Co (TPE:5243) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, Eson Precision Ind Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Eson Precision Ind Co PEG Ratio vs Hardware Industry
For the Hardware industry and Technology sector, Eson Precision Ind Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Eson Precision Ind Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Eson Precision Ind Co (TPE:5243) has a PEG Ratio of 2.14 as of Jul. 05, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Eson Precision Ind Co and its competitors. This is near median its historical median of 2.21. Over the past decade, Eson Precision Ind Co's PEG Ratio has ranged from 0.93 to 234.00. According to the industry distribution chart, Eson Precision Ind Co ranks #412 out of 856 companies in the Hardware industry, placing it in the top 48.1%.
Is Eson Precision Ind Co's PEG Ratio too high?
Eson Precision Ind Co's current PEG Ratio of 2.14 is near median its 10-year median of 2.21. Over the past 10 years, this metric has ranged from a low of 0.93 to a high of 234.00. The Hardware industry median PEG Ratio is 2.29. Eson Precision Ind Co's value of 2.14 is 6.3% below this industry median. Based on the distribution chart, Eson Precision Ind Co ranks #412 out of 856 companies in the Hardware industry, which is above the industry midpoint. Overall, Eson Precision Ind Co has a GF Score™ of 80/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Eson Precision Ind Co's PEG Ratio compare to APH and GLW?
According to the Hardware industry distribution chart, Eson Precision Ind Co ranks #412 out of 856 companies for PEG Ratio. This puts Eson Precision Ind Co in the upper half of its industry. The industry median PEG Ratio is 2.29. Eson Precision Ind Co's value of 2.14 is 6.3% below this benchmark. Historically, Eson Precision Ind Co's own PEG Ratio has ranged from 0.93 to 234.00 over the past decade. While the company's 10-year median is 2.21 vs. the industry median of 2.29, Eson Precision Ind Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Hardware company?
The median PEG Ratio among Hardware companies is 2.29, based on 856 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Eson Precision Ind Co's current PEG Ratio of 2.14 is 6.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Eson Precision Ind Co and its competitors. For the Hardware industry, the median PEG Ratio is 2.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Eson Precision Ind Co's current PEG Ratio is 2.14, which is near median its own 10-year median of 2.21. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Eson Precision Ind Co stock overvalued right now?
Based on GuruFocus' analysis, Eson Precision Ind Co (TPE:5243) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$58.32, compared to a current price of NT$102.50 — trading 75.8% above its estimated fair value. The current PEG Ratio is 2.14, which is near median its 10-year median of 2.21 and 6.3% below the Hardware industry median of 2.29. Eson Precision Ind Co's overall GF Score™ is 80/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Eson Precision Ind Co (TPE:5243), the current PEG Ratio is 2.14 as of Jul. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Eson Precision Ind Co (TPE:5243) Overvalued in 2026?
Based on GuruFocus' analysis, Eson Precision Ind Co stock appears to be overvalued.
The current stock price of NT$102.50 is trading 75.8% above its estimated GF Value™ of NT$58.32.
GuruFocus considers Eson Precision Ind Co to be Significantly Overvalued.
Key valuation signals for TPE:5243:
PEG Ratio: 2.14 (near median its 10-year median of 2.21)
GF Value™: NT$58.32 vs. price of NT$102.50 (75.8% above fair value)
Industry Position: 6.3% below the Hardware median (#412 of 856)
No single metric tells the full story. See the TPE:5243 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Eson Precision Ind Co Ltd mainly designs, develops, manufactures, and sells molds, plastic, hardware products, and new types of electronic components and flat-panel displays. The company operates in the design, development, manufacture, and sales segments of products such as molds, plastics, and hardware goods as individual operating segments. The Group's revenue from continuing operations from its products and services is Automobile mechanical parts, Network communication mechanical parts, Mechanical components for consumer electronics, and Others. Geographically, it operates in China, Asia, the Americas, and other regions.
80GF Score
Get the complete analysis for TPE:5243
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:5243 has been successfully added to your 
